All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: [PATCH v5 18/28] drm/i915/dp: Enable/Disable DSC in DP Sink
Date: Fri,  5 Oct 2018 16:22:56 -0700	[thread overview]
Message-ID: <20181005232306.31133-19-manasi.d.navare@intel.com> (raw)
In-Reply-To: <20181005232306.31133-1-manasi.d.navare@intel.com>

From: Gaurav K Singh <gaurav.k.singh@intel.com>

This patch enables decompression support in sink device
before link training and disables the same during the
DDI disabling.

v2:(From Manasi)
* Change the enable/disable function to take crtc_state
instead of intel_dp as an argument (Manasi)
* Use the compression_enable flag as part of crtc_state (Manasi)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Gaurav K Singh <gaurav.k.singh@intel.com>
Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
---
 drivers/gpu/drm/i915/intel_ddi.c |  5 +++++
 drivers/gpu/drm/i915/intel_dp.c  | 15 +++++++++++++++
 drivers/gpu/drm/i915/intel_drv.h |  3 +++
 3 files changed, 23 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index b6594948b617..0c0461cc664c 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -2906,6 +2906,8 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
 	intel_ddi_init_dp_buf_reg(encoder);
 	if (!is_mst)
 		intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
+	intel_dp_sink_set_decompression_state(intel_dp, crtc_state,
+					      DP_DECOMPRESSION_EN);
 	intel_dp_start_link_train(intel_dp);
 	if (port != PORT_A || INTEL_GEN(dev_priv) >= 9)
 		intel_dp_stop_link_train(intel_dp);
@@ -3236,6 +3238,9 @@ static void intel_disable_ddi_dp(struct intel_encoder *encoder,
 	intel_edp_drrs_disable(intel_dp, old_crtc_state);
 	intel_psr_disable(intel_dp, old_crtc_state);
 	intel_edp_backlight_off(old_conn_state);
+	/* Disable the decompression in DP Sink */
+	intel_dp_sink_set_decompression_state(intel_dp, old_crtc_state,
+					      ~DP_DECOMPRESSION_EN);
 }
 
 static void intel_disable_ddi_hdmi(struct intel_encoder *encoder,
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 89990a96263b..9a4012f3f1da 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2970,6 +2970,21 @@ static bool downstream_hpd_needs_d0(struct intel_dp *intel_dp)
 		intel_dp->downstream_ports[0] & DP_DS_PORT_HPD;
 }
 
+void intel_dp_sink_set_decompression_state(struct intel_dp *intel_dp,
+					   const struct intel_crtc_state *crtc_state,
+					   int state)
+{
+	int ret;
+
+	if (!crtc_state->dsc_params.compression_enable)
+		return;
+
+	ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_DSC_ENABLE, state);
+	if (ret < 0)
+		DRM_DEBUG_KMS("Failed to %s sink decompression state\n",
+			      state == DP_DECOMPRESSION_EN ? "enable" : "disable");
+}
+
 /* If the sink supports it, try to set the power state appropriately */
 void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
 {
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 36089c77e493..3996df385d33 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1702,6 +1702,9 @@ void intel_dp_stop_link_train(struct intel_dp *intel_dp);
 int intel_dp_retrain_link(struct intel_encoder *encoder,
 			  struct drm_modeset_acquire_ctx *ctx);
 void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode);
+void intel_dp_sink_set_decompression_state(struct intel_dp *intel_dp,
+					   const struct intel_crtc_state *crtc_state,
+					   int state);
 void intel_dp_encoder_reset(struct drm_encoder *encoder);
 void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder);
 void intel_dp_encoder_destroy(struct drm_encoder *encoder);
-- 
2.18.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2018-10-05 23:22 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-05 23:22 [PATCH v5 00/28] Display Stream Compression enabling on eDP/DP Manasi Navare
2018-10-05 23:22 ` [PATCH v5 01/28] drm/i915/dsc: Add slice_row_per_frame in DSC PPS programming Manasi Navare
2018-10-05 23:22 ` [PATCH v5 02/28] drm/dp: Add DP DSC DPCD receiver capability size define and missing SHIFT Manasi Navare
2018-10-05 23:22 ` [PATCH v5 03/28] drm/i915/dp: Cache the DP/eDP DSC DPCD register set on Hotplug/eDP Init Manasi Navare
2018-10-05 23:22 ` [PATCH v5 04/28] drm/dp: DRM DP helper/macros to get DP sink DSC parameters Manasi Navare
2018-10-05 23:22 ` [PATCH v5 05/28] drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC Manasi Navare
2018-10-05 23:22 ` [PATCH v5 06/28] drm/i915/dp: Validate modes using max Output BPP and slice count when DSC supported Manasi Navare
2018-10-05 23:22 ` [PATCH v5 07/28] drm/dp: Define payload size for DP SDP PPS packet Manasi Navare
2018-10-05 23:22 ` [PATCH v5 08/28] drm/dsc: Define Display Stream Compression PPS infoframe Manasi Navare
2018-10-05 23:22 ` [PATCH v5 09/28] drm/dsc: Define VESA Display Stream Compression Capabilities Manasi Navare
2018-10-05 23:22 ` [PATCH v5 10/28] drm/dsc: Define Rate Control values that do not change over configurations Manasi Navare
2018-10-05 23:22 ` [PATCH v5 11/28] drm/dsc: Add helpers for DSC picture parameter set infoframes Manasi Navare
2018-10-16  1:27   ` Manasi Navare
2018-10-05 23:22 ` [PATCH v5 12/28] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-10-05 23:22 ` [PATCH v5 13/28] drm/i915/dp: Compute DSC pipe config in atomic check Manasi Navare
2018-10-16  1:29   ` Manasi Navare
2018-10-22 23:53   ` Srivatsa, Anusha
2018-10-05 23:22 ` [PATCH v5 14/28] drm/i915/dp: Do not enable PSR2 if DSC is enabled Manasi Navare
2018-10-05 23:22 ` [PATCH v5 15/28] drm/dsc: Define the DSC 1.1 and 1.2 Line Buffer depth constants Manasi Navare
2018-10-22 22:04   ` [Intel-gfx] " Srivatsa, Anusha
2018-10-05 23:22 ` [PATCH v5 16/28] drm/i915/dsc: Define & Compute VESA DSC params Manasi Navare
2018-10-16  1:31   ` Manasi Navare
2018-10-22 22:26   ` Srivatsa, Anusha
2018-10-05 23:22 ` [PATCH v5 17/28] drm/i915/dsc: Compute Rate Control parameters for DSC Manasi Navare
2018-10-22 23:34   ` Srivatsa, Anusha
2018-10-23 18:42     ` Manasi Navare
2018-10-23 18:45       ` Srivatsa, Anusha
2018-10-05 23:22 ` Manasi Navare [this message]
2018-10-22 18:50   ` [PATCH v5 18/28] drm/i915/dp: Enable/Disable DSC in DP Sink Manasi Navare
2018-10-05 23:22 ` [PATCH v5 19/28] drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI Manasi Navare
2018-10-16  1:22   ` Manasi Navare
2018-10-16 19:01   ` Ville Syrjälä
2018-10-16 19:19     ` Ville Syrjälä
2018-10-16 19:42       ` Manasi Navare
2018-10-16 19:45         ` Ville Syrjälä
2018-10-16 21:04           ` Manasi Navare
2018-10-16 21:21             ` [Intel-gfx] " Manasi Navare
2018-10-16 19:19     ` Manasi Navare
2018-10-16 19:33       ` Ville Syrjälä
2018-10-05 23:22 ` [PATCH v5 20/28] drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling Manasi Navare
2018-10-16 19:58   ` Srivatsa, Anusha
2018-10-16 21:02     ` Manasi Navare
2018-10-17 16:58       ` Srivatsa, Anusha
2018-10-05 23:22 ` [PATCH v5 21/28] drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs Manasi Navare
2018-10-05 23:23 ` [PATCH v5 22/28] drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes Manasi Navare
2018-10-05 23:23 ` [PATCH v5 23/28] drm/i915/icl: Add Display Stream Splitter control registers Manasi Navare
2018-10-05 23:23 ` [PATCH v5 24/28] drm/i915/dp: Configure Display stream splitter registers during DSC enable Manasi Navare
2018-10-18 17:02   ` Ville Syrjälä
2018-10-19 22:40     ` Manasi Navare
2018-10-05 23:23 ` [PATCH v5 25/28] drm/i915/dp: Disable DSC in source by disabling DSS CTL bits Manasi Navare
2018-10-05 23:23 ` [PATCH v5 26/28] drm/i915/dsc: Enable and disable appropriate power wells for VDSC Manasi Navare
2018-10-16  1:23   ` Manasi Navare
2018-10-16 19:31   ` Ville Syrjälä
2018-10-05 23:23 ` [PATCH v5 27/28] drm/i915/dsc: Add Per connector debugfs node for DSC support/enable Manasi Navare
2018-10-05 23:34   ` Lyude Paul
2018-10-09 22:20     ` Manasi Navare
2018-10-09 22:24       ` Lyude Paul
2018-10-05 23:23 ` [PATCH v5 28/28] drm/i915/dsc: Force DSC enable if requested by IGT/userspace Manasi Navare
2018-10-24 17:51   ` Srivatsa, Anusha
2018-10-06  0:21 ` ✗ Fi.CI.CHECKPATCH: warning for Display Stream Compression enabling on eDP/DP (rev5) Patchwork
2018-10-06  0:31 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-10-06  0:45 ` ✗ Fi.CI.BAT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181005232306.31133-19-manasi.d.navare@intel.com \
    --to=manasi.d.navare@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.