From: Richard Leitner <richard.leitner@skidata.com>
To: <dmitry.torokhov@gmail.com>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>
Cc: <linux-input@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
Richard Leitner <richard.leitner@skidata.com>
Subject: [PATCH v2 1/8] dt-bindings: input: touchscreen: sx8654: add reset-gpio property
Date: Wed, 17 Oct 2018 14:51:09 +0200 [thread overview]
Message-ID: <20181017125116.20077-2-richard.leitner@skidata.com> (raw)
In-Reply-To: <20181017125116.20077-1-richard.leitner@skidata.com>
Document the reset-gpio property for the sx8654 touchscreen controller
driver.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
---
Documentation/devicetree/bindings/input/touchscreen/sx8654.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
index 4886c4aa2906..ca521d8f7d65 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
@@ -5,6 +5,9 @@ Required properties:
- reg: i2c slave address
- interrupts: touch controller interrupt
+Optional properties:
+ - reset-gpios: GPIO specification for the NRST input
+
Example:
sx8654@48 {
@@ -12,4 +15,5 @@ Example:
reg = <0x48>;
interrupt-parent = <&gpio6>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
};
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Richard Leitner <richard.leitner@skidata.com>
To: dmitry.torokhov@gmail.com, robh+dt@kernel.org, mark.rutland@arm.com
Cc: linux-input@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Richard Leitner <richard.leitner@skidata.com>
Subject: [PATCH v2 1/8] dt-bindings: input: touchscreen: sx8654: add reset-gpio property
Date: Wed, 17 Oct 2018 14:51:09 +0200 [thread overview]
Message-ID: <20181017125116.20077-2-richard.leitner@skidata.com> (raw)
In-Reply-To: <20181017125116.20077-1-richard.leitner@skidata.com>
Document the reset-gpio property for the sx8654 touchscreen controller
driver.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
---
Documentation/devicetree/bindings/input/touchscreen/sx8654.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
index 4886c4aa2906..ca521d8f7d65 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
@@ -5,6 +5,9 @@ Required properties:
- reg: i2c slave address
- interrupts: touch controller interrupt
+Optional properties:
+ - reset-gpios: GPIO specification for the NRST input
+
Example:
sx8654@48 {
@@ -12,4 +15,5 @@ Example:
reg = <0x48>;
interrupt-parent = <&gpio6>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
};
--
2.11.0
next prev parent reply other threads:[~2018-10-17 16:07 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-17 12:51 [PATCH v2 0/7] Input: sx8654 - reset-gpio, sx865[056] support, etc Richard Leitner
2018-10-17 12:51 ` Richard Leitner
2018-10-17 12:51 ` Richard Leitner [this message]
2018-10-17 12:51 ` [PATCH v2 1/8] dt-bindings: input: touchscreen: sx8654: add reset-gpio property Richard Leitner
2018-10-18 20:34 ` Rob Herring
2018-10-18 20:34 ` Rob Herring
2018-10-17 12:51 ` [PATCH v2 2/8] Input: sx8654 - add reset-gpio support Richard Leitner
2018-10-17 12:51 ` Richard Leitner
2018-10-17 12:51 ` [PATCH v2 3/8] dt-bindings: input: touchscreen: sx8654: add compatible models Richard Leitner
2018-10-17 12:51 ` Richard Leitner
2018-10-18 20:35 ` Rob Herring
2018-10-18 20:35 ` Rob Herring
2018-10-17 12:51 ` [PATCH v2 4/8] Input: sx8654 - add sx8655 and sx8656 to compatibles Richard Leitner
2018-10-17 12:51 ` Richard Leitner
2018-10-17 12:51 ` [PATCH v2 5/8] dt-bindings: input: touchscreen: sx8654: add sx8650 to comatibles Richard Leitner
2018-10-17 12:51 ` Richard Leitner
2018-10-18 20:35 ` Rob Herring
2018-10-18 20:35 ` Rob Herring
2018-10-17 12:51 ` [PATCH v2 6/8] Input: sx8654 - add sx8650 support Richard Leitner
2018-10-17 12:51 ` Richard Leitner
2018-10-17 12:51 ` [PATCH v2 7/8] Input: sx8654 - use common of_touchscreen functions Richard Leitner
2018-10-17 12:51 ` Richard Leitner
2018-10-17 12:51 ` [PATCH v2 8/8] Input: sx8654 - convert #defined flags to BIT(x) Richard Leitner
2018-10-17 12:51 ` Richard Leitner
2018-11-04 21:38 ` [PATCH v2 0/7] Input: sx8654 - reset-gpio, sx865[056] support, etc Richard Leitner
2018-11-04 21:38 ` Richard Leitner
2018-12-03 8:25 ` Richard Leitner
2018-12-03 8:25 ` Richard Leitner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181017125116.20077-2-richard.leitner@skidata.com \
--to=richard.leitner@skidata.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.