From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH v2 6/8] drm/i915/gen11: Program the chroma upsampler for HDR planes.
Date: Thu, 18 Oct 2018 13:51:32 +0200 [thread overview]
Message-ID: <20181018115134.9061-7-maarten.lankhorst@linux.intel.com> (raw)
In-Reply-To: <20181018115134.9061-1-maarten.lankhorst@linux.intel.com>
We configure the chroma upsampler with the same chroma siting as
used by the scaler for consistency, the chroma upsampler is used
instead of the scaler for YUV 4:2:0 on ICL's HDR planes.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
Can't test this completely until we have correct colors by programming
the input CSC, but should be easy to fix the phases afterwards..
drivers/gpu/drm/i915/i915_reg.h | 22 ++++++++++++++++++++++
drivers/gpu/drm/i915/intel_sprite.c | 22 ++++++++++++++++++++++
2 files changed, 44 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 8a81e7c2fe25..17b38ccbff6e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6524,6 +6524,19 @@ enum {
#define _PLANE_AUX_DIST_2_A 0x702c0
#define _PLANE_AUX_OFFSET_1_A 0x701c4
#define _PLANE_AUX_OFFSET_2_A 0x702c4
+#define _PLANE_CUS_CTL_1_A 0x701c8
+#define _PLANE_CUS_CTL_2_A 0x702c8
+#define PLANE_CUS_ENABLE (1 << 31)
+#define PLANE_CUS_PLANE_6 (0 << 30)
+#define PLANE_CUS_PLANE_7 (1 << 30)
+#define PLANE_CUS_HPHASE_SIGN_NEGATIVE (1 << 19)
+#define PLANE_CUS_HPHASE_0 (0 << 16)
+#define PLANE_CUS_HPHASE_0_25 (1 << 16)
+#define PLANE_CUS_HPHASE_0_5 (2 << 16)
+#define PLANE_CUS_VPHASE_SIGN_NEGATIVE (1 << 15)
+#define PLANE_CUS_VPHASE_0 (0 << 12)
+#define PLANE_CUS_VPHASE_0_25 (1 << 12)
+#define PLANE_CUS_VPHASE_0_5 (2 << 12)
#define _PLANE_COLOR_CTL_1_A 0x701CC /* GLK+ */
#define _PLANE_COLOR_CTL_2_A 0x702CC /* GLK+ */
#define _PLANE_COLOR_CTL_3_A 0x703CC /* GLK+ */
@@ -6661,6 +6674,15 @@ enum {
#define PLANE_AUX_OFFSET(pipe, plane) \
_MMIO_PLANE(plane, _PLANE_AUX_OFFSET_1(pipe), _PLANE_AUX_OFFSET_2(pipe))
+#define _PLANE_CUS_CTL_1_B 0x711c8
+#define _PLANE_CUS_CTL_2_B 0x712c8
+#define _PLANE_CUS_CTL_1(pipe) \
+ _PIPE(pipe, _PLANE_CUS_CTL_1_A, _PLANE_CUS_CTL_1_B)
+#define _PLANE_CUS_CTL_2(pipe) \
+ _PIPE(pipe, _PLANE_CUS_CTL_2_A, _PLANE_CUS_CTL_2_B)
+#define PLANE_CUS_CTL(pipe, plane) \
+ _MMIO_PLANE(plane, _PLANE_CUS_CTL_1(pipe), _PLANE_CUS_CTL_2(pipe))
+
#define _PLANE_COLOR_CTL_1_B 0x711CC
#define _PLANE_COLOR_CTL_2_B 0x712CC
#define _PLANE_COLOR_CTL_3_B 0x713CC
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index a2a4328107b6..2ec5c5df0d24 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -380,6 +380,7 @@ skl_update_plane(struct intel_plane *plane,
uint32_t y = plane_state->color_plane[0].y;
uint32_t src_w = drm_rect_width(&plane_state->base.src) >> 16;
uint32_t src_h = drm_rect_height(&plane_state->base.src) >> 16;
+ struct intel_plane *linked = plane_state->linked_plane;
unsigned long irqflags;
u32 keymsk = 0, keymax = 0;
@@ -417,6 +418,27 @@ skl_update_plane(struct intel_plane *plane,
(plane_state->color_plane[1].y << 16) |
plane_state->color_plane[1].x);
+ if (icl_is_hdr_plane(plane)) {
+ u32 cus_ctl = 0;
+
+ if (linked) {
+ /* Enable and use MPEG-2 chroma siting */
+ cus_ctl = PLANE_CUS_ENABLE |
+ PLANE_CUS_HPHASE_0 |
+ PLANE_CUS_VPHASE_SIGN_NEGATIVE |
+ PLANE_CUS_VPHASE_0_25;
+
+ if (linked->id == PLANE_SPRITE5)
+ cus_ctl |= PLANE_CUS_PLANE_7;
+ else if (linked->id == PLANE_SPRITE4)
+ cus_ctl |= PLANE_CUS_PLANE_6;
+ else
+ MISSING_CASE(linked->id);
+ }
+
+ I915_WRITE_FW(PLANE_CUS_CTL(pipe, plane_id), cus_ctl);
+ }
+
/* program plane scaler */
if (plane_state->scaler_id >= 0) {
skl_program_scaler(dev_priv, plane, crtc_state, plane_state);
--
2.19.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-10-18 11:51 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-18 11:51 [PATCH v2 0/8] drm/i915/gen11: Add support for the NV12 format Maarten Lankhorst
2018-10-18 11:51 ` [PATCH v2 1/8] drm/i915: Fix unsigned overflow when calculating total data rate Maarten Lankhorst
2018-10-18 14:53 ` Ville Syrjälä
2018-10-19 12:58 ` Maarten Lankhorst
2018-10-18 15:11 ` Ville Syrjälä
2018-10-19 13:03 ` Maarten Lankhorst
2018-10-19 13:06 ` Chris Wilson
2018-10-19 14:15 ` Maarten Lankhorst
2018-10-22 10:20 ` [PATCH] drm/i915: Fix unsigned overflow when calculating total data rate, v2 Maarten Lankhorst
2018-10-18 11:51 ` [PATCH v2 2/8] drm/i915/gen11: Enable 6 sprites on gen11 Maarten Lankhorst
2018-10-18 11:51 ` [PATCH v2 3/8] drm/i915/gen11: Link nv12 Y and UV planes in the atomic state, v4 Maarten Lankhorst
2018-10-18 16:00 ` Ville Syrjälä
2018-10-19 14:22 ` Maarten Lankhorst
2018-10-19 17:14 ` Ville Syrjälä
2018-10-22 10:09 ` Maarten Lankhorst
2018-10-22 13:51 ` [PATCH] drm/i915/gen11: Link nv12 Y and UV planes in the atomic state, v5 Maarten Lankhorst
2018-10-22 15:48 ` Ville Syrjälä
2018-10-23 14:25 ` Maarten Lankhorst
2018-10-23 14:36 ` Ville Syrjälä
2018-10-23 14:58 ` Maarten Lankhorst
2018-10-18 11:51 ` [PATCH v2 4/8] drm/i915/gen11: Handle watermarks correctly for separate Y/UV planes, v2 Maarten Lankhorst
2018-10-18 16:17 ` Ville Syrjälä
2018-10-18 11:51 ` [PATCH v2 5/8] drm/i915/gen11: Program the scalers correctly for planar formats, v3 Maarten Lankhorst
2018-10-18 14:47 ` Ville Syrjälä
2018-10-18 11:51 ` Maarten Lankhorst [this message]
2018-10-18 14:50 ` [PATCH v2 6/8] drm/i915/gen11: Program the chroma upsampler for HDR planes Ville Syrjälä
2018-10-18 11:51 ` [PATCH v2 7/8] drm/i915/gen11: Program the Y and UV plane for planar mode correctly, v3 Maarten Lankhorst
2018-10-18 14:51 ` Ville Syrjälä
2018-10-18 11:51 ` [PATCH v2 8/8] drm/i915/gen11: Expose planar format support on gen11 Maarten Lankhorst
2018-10-18 16:20 ` Ville Syrjälä
2018-10-22 13:45 ` [PATCH] drm/i915/gen11: Expose planar format support on gen11, v2 Maarten Lankhorst
2018-10-22 15:55 ` Ville Syrjälä
2018-10-18 12:03 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915/gen11: Add support for the NV12 format Patchwork
2018-10-18 12:06 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-10-18 12:19 ` ✓ Fi.CI.BAT: success " Patchwork
2018-10-18 15:16 ` [PATCH v2 0/8] " Ville Syrjälä
2018-10-18 16:20 ` Maarten Lankhorst
2018-10-22 10:52 ` ✓ Fi.CI.IGT: success for " Patchwork
2018-10-22 15:28 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915/gen11: Add support for the NV12 format. (rev4) Patchwork
2018-10-22 15:32 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-10-22 15:53 ` ✓ Fi.CI.BAT: success " Patchwork
2018-10-22 19:02 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181018115134.9061-7-maarten.lankhorst@linux.intel.com \
--to=maarten.lankhorst@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.