From: Kai-Heng Feng <kai.heng.feng@canonical.com> To: gregkh@linuxfoundation.org Cc: stern@rowland.harvard.edu, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, Kai-Heng Feng <kai.heng.feng@canonical.com> Subject: [PATCH v2] USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub Date: Fri, 19 Oct 2018 16:14:50 +0800 [thread overview] Message-ID: <20181019081450.21230-1-kai.heng.feng@canonical.com> (raw) Devices connected under Terminus Technology Inc. Hub (1a40:0101) may fail to work after the system resumes from suspend: [ 206.063325] usb 3-2.4: reset full-speed USB device number 4 using xhci_hcd [ 206.143691] usb 3-2.4: device descriptor read/64, error -32 [ 206.351671] usb 3-2.4: device descriptor read/64, error -32 Info for this hub: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1a40 ProdID=0101 Rev=01.11 S: Product=USB 2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub Some expirements indicate that the USB devices connected to the hub are innocent, it's the hub itself is to blame. The hub needs extra delay time after it resets its port. Hence wait for extra delay, if the device is connected to this quirky hub. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> --- v2: - Use hub->hdev to check quirk. - Merge the delay with TRSTRCY. Documentation/admin-guide/kernel-parameters.txt | 2 ++ drivers/usb/core/hub.c | 14 +++++++++++--- drivers/usb/core/quirks.c | 6 ++++++ include/linux/usb/quirks.h | 3 +++ 4 files changed, 22 insertions(+), 3 deletions(-) diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 92eb1f42240d..626bb7892ab3 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -4683,6 +4683,8 @@ prevent spurious wakeup); n = USB_QUIRK_DELAY_CTRL_MSG (Device needs a pause after every control message); + o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra + delay after resetting its port); Example: quirks=0781:5580:bk,0a5c:5834:gij usbhid.mousepoll= diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 462ce49f683a..6e0823790bee 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2791,6 +2791,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1, int i, status; u16 portchange, portstatus; struct usb_port *port_dev = hub->ports[port1 - 1]; + int reset_recovery_time; if (!hub_is_superspeed(hub->hdev)) { if (warm) { @@ -2882,11 +2883,18 @@ static int hub_port_reset(struct usb_hub *hub, int port1, done: if (status == 0) { - /* TRSTRCY = 10 ms; plus some extra */ if (port_dev->quirks & USB_PORT_QUIRK_FAST_ENUM) usleep_range(10000, 12000); - else - msleep(10 + 40); + else { + /* TRSTRCY = 10 ms; plus some extra */ + reset_recovery_time = 10 + 40; + + /* Hub needs extra delay after resetting its port. */ + if (hub->hdev->quirks & USB_QUIRK_HUB_SLOW_RESET) + reset_recovery_time += 100; + + msleep(reset_recovery_time); + } if (udev) { struct usb_hcd *hcd = bus_to_hcd(udev->bus); diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 178d6c6063c0..4d7d948eae63 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -128,6 +128,9 @@ static int quirks_param_set(const char *val, const struct kernel_param *kp) case 'n': flags |= USB_QUIRK_DELAY_CTRL_MSG; break; + case 'o': + flags |= USB_QUIRK_HUB_SLOW_RESET; + break; /* Ignore unrecognized flag characters */ } } @@ -380,6 +383,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1a0a, 0x0200), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + /* Terminus Technology Inc. Hub */ + { USB_DEVICE(0x1a40, 0x0101), .driver_info = USB_QUIRK_HUB_SLOW_RESET }, + /* Corsair K70 RGB */ { USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT }, diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h index b7a99ce56bc9..a1be64c9940f 100644 --- a/include/linux/usb/quirks.h +++ b/include/linux/usb/quirks.h @@ -66,4 +66,7 @@ /* Device needs a pause after every control message. */ #define USB_QUIRK_DELAY_CTRL_MSG BIT(13) +/* Hub needs extra delay after resetting its port. */ +#define USB_QUIRK_HUB_SLOW_RESET BIT(14) + #endif /* __LINUX_USB_QUIRKS_H */ -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Kai-Heng Feng <kai.heng.feng@canonical.com> To: gregkh@linuxfoundation.org Cc: stern@rowland.harvard.edu, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, Kai-Heng Feng <kai.heng.feng@canonical.com> Subject: [v2] USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub Date: Fri, 19 Oct 2018 16:14:50 +0800 [thread overview] Message-ID: <20181019081450.21230-1-kai.heng.feng@canonical.com> (raw) Devices connected under Terminus Technology Inc. Hub (1a40:0101) may fail to work after the system resumes from suspend: [ 206.063325] usb 3-2.4: reset full-speed USB device number 4 using xhci_hcd [ 206.143691] usb 3-2.4: device descriptor read/64, error -32 [ 206.351671] usb 3-2.4: device descriptor read/64, error -32 Info for this hub: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1a40 ProdID=0101 Rev=01.11 S: Product=USB 2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub Some expirements indicate that the USB devices connected to the hub are innocent, it's the hub itself is to blame. The hub needs extra delay time after it resets its port. Hence wait for extra delay, if the device is connected to this quirky hub. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> --- v2: - Use hub->hdev to check quirk. - Merge the delay with TRSTRCY. Documentation/admin-guide/kernel-parameters.txt | 2 ++ drivers/usb/core/hub.c | 14 +++++++++++--- drivers/usb/core/quirks.c | 6 ++++++ include/linux/usb/quirks.h | 3 +++ 4 files changed, 22 insertions(+), 3 deletions(-) diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 92eb1f42240d..626bb7892ab3 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -4683,6 +4683,8 @@ prevent spurious wakeup); n = USB_QUIRK_DELAY_CTRL_MSG (Device needs a pause after every control message); + o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra + delay after resetting its port); Example: quirks=0781:5580:bk,0a5c:5834:gij usbhid.mousepoll= diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 462ce49f683a..6e0823790bee 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2791,6 +2791,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1, int i, status; u16 portchange, portstatus; struct usb_port *port_dev = hub->ports[port1 - 1]; + int reset_recovery_time; if (!hub_is_superspeed(hub->hdev)) { if (warm) { @@ -2882,11 +2883,18 @@ static int hub_port_reset(struct usb_hub *hub, int port1, done: if (status == 0) { - /* TRSTRCY = 10 ms; plus some extra */ if (port_dev->quirks & USB_PORT_QUIRK_FAST_ENUM) usleep_range(10000, 12000); - else - msleep(10 + 40); + else { + /* TRSTRCY = 10 ms; plus some extra */ + reset_recovery_time = 10 + 40; + + /* Hub needs extra delay after resetting its port. */ + if (hub->hdev->quirks & USB_QUIRK_HUB_SLOW_RESET) + reset_recovery_time += 100; + + msleep(reset_recovery_time); + } if (udev) { struct usb_hcd *hcd = bus_to_hcd(udev->bus); diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 178d6c6063c0..4d7d948eae63 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -128,6 +128,9 @@ static int quirks_param_set(const char *val, const struct kernel_param *kp) case 'n': flags |= USB_QUIRK_DELAY_CTRL_MSG; break; + case 'o': + flags |= USB_QUIRK_HUB_SLOW_RESET; + break; /* Ignore unrecognized flag characters */ } } @@ -380,6 +383,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1a0a, 0x0200), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + /* Terminus Technology Inc. Hub */ + { USB_DEVICE(0x1a40, 0x0101), .driver_info = USB_QUIRK_HUB_SLOW_RESET }, + /* Corsair K70 RGB */ { USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT }, diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h index b7a99ce56bc9..a1be64c9940f 100644 --- a/include/linux/usb/quirks.h +++ b/include/linux/usb/quirks.h @@ -66,4 +66,7 @@ /* Device needs a pause after every control message. */ #define USB_QUIRK_DELAY_CTRL_MSG BIT(13) +/* Hub needs extra delay after resetting its port. */ +#define USB_QUIRK_HUB_SLOW_RESET BIT(14) + #endif /* __LINUX_USB_QUIRKS_H */
next reply other threads:[~2018-10-19 8:15 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-10-19 8:14 Kai-Heng Feng [this message] 2018-10-19 8:14 ` [v2] USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub Kai-Heng Feng 2018-10-19 14:05 ` [PATCH v2] " Alan Stern 2018-10-19 14:05 ` [v2] " Alan Stern
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20181019081450.21230-1-kai.heng.feng@canonical.com \ --to=kai.heng.feng@canonical.com \ --cc=gregkh@linuxfoundation.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=stern@rowland.harvard.edu \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.