From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> To: xuwei5@hisilicon.com, linus.walleij@linaro.org, robh+dt@kernel.org Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, amit.kucheria@linaro.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Subject: [PATCH 0/5] Add Pinctrl and GPIO support for HI3670 SoC Date: Wed, 24 Oct 2018 00:36:50 +0530 [thread overview] Message-ID: <20181023190655.12004-1-manivannan.sadhasivam@linaro.org> (raw) This patchset adds Pinctrl and GPIO support for HI3670 SoC from HiSilicon found in the HiKey970 developement board. Also, the remaining UARTs are enabled and GPIO line names are added based on the Schematics and the 96Boards Consumer Edition spec. Note: These patches are based on the below common clk patches pushed earlier: arm64: dts: hisilicon: Add clock nodes for Hi3670 SoC arm64: dts: hisilicon: Source SoC clock for UART6 Thanks, Mani Manivannan Sadhasivam (5): arm64: dts: hisilicon: Add Pinctrl support for HiKey970 board arm64: dts: hisilicon: hi3760: Add GPIO controller support arm64: dts: hisilicon: hi3670: Add UART nodes arm64: boot: dts: hisilicon: hikey970: Enable on-board UARTs arm64: dts: hisilicon: hikey970: Add GPIO line names .../boot/dts/hisilicon/hi3670-hikey970.dts | 338 +++++++++++++ arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 451 ++++++++++++++++++ .../boot/dts/hisilicon/hikey970-pinctrl.dtsi | 244 ++++++++++ 3 files changed, 1033 insertions(+) create mode 100644 arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: manivannan.sadhasivam@linaro.org (Manivannan Sadhasivam) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 0/5] Add Pinctrl and GPIO support for HI3670 SoC Date: Wed, 24 Oct 2018 00:36:50 +0530 [thread overview] Message-ID: <20181023190655.12004-1-manivannan.sadhasivam@linaro.org> (raw) This patchset adds Pinctrl and GPIO support for HI3670 SoC from HiSilicon found in the HiKey970 developement board. Also, the remaining UARTs are enabled and GPIO line names are added based on the Schematics and the 96Boards Consumer Edition spec. Note: These patches are based on the below common clk patches pushed earlier: arm64: dts: hisilicon: Add clock nodes for Hi3670 SoC arm64: dts: hisilicon: Source SoC clock for UART6 Thanks, Mani Manivannan Sadhasivam (5): arm64: dts: hisilicon: Add Pinctrl support for HiKey970 board arm64: dts: hisilicon: hi3760: Add GPIO controller support arm64: dts: hisilicon: hi3670: Add UART nodes arm64: boot: dts: hisilicon: hikey970: Enable on-board UARTs arm64: dts: hisilicon: hikey970: Add GPIO line names .../boot/dts/hisilicon/hi3670-hikey970.dts | 338 +++++++++++++ arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 451 ++++++++++++++++++ .../boot/dts/hisilicon/hikey970-pinctrl.dtsi | 244 ++++++++++ 3 files changed, 1033 insertions(+) create mode 100644 arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi -- 2.17.1
next reply other threads:[~2018-10-23 19:06 UTC|newest] Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-10-23 19:06 Manivannan Sadhasivam [this message] 2018-10-23 19:06 ` [PATCH 0/5] Add Pinctrl and GPIO support for HI3670 SoC Manivannan Sadhasivam 2018-10-23 19:06 ` [PATCH 1/5] arm64: dts: hisilicon: Add Pinctrl support for HiKey970 board Manivannan Sadhasivam 2018-10-23 19:06 ` Manivannan Sadhasivam 2018-10-23 19:06 ` [PATCH 2/5] arm64: dts: hisilicon: hi3760: Add GPIO controller support Manivannan Sadhasivam 2018-10-23 19:06 ` Manivannan Sadhasivam 2018-10-23 19:06 ` [PATCH 3/5] arm64: dts: hisilicon: hi3670: Add UART nodes Manivannan Sadhasivam 2018-10-23 19:06 ` Manivannan Sadhasivam 2018-10-23 19:06 ` [PATCH 4/5] arm64: boot: dts: hisilicon: hikey970: Enable on-board UARTs Manivannan Sadhasivam 2018-10-23 19:06 ` Manivannan Sadhasivam 2018-10-23 19:06 ` [PATCH 5/5] arm64: dts: hisilicon: hikey970: Add GPIO line names Manivannan Sadhasivam 2018-10-23 19:06 ` Manivannan Sadhasivam 2018-10-31 9:43 ` [PATCH 0/5] Add Pinctrl and GPIO support for HI3670 SoC Linus Walleij 2018-10-31 9:43 ` Linus Walleij 2018-10-31 9:43 ` Linus Walleij 2018-11-12 7:17 ` Manivannan Sadhasivam 2018-11-12 7:17 ` Manivannan Sadhasivam 2018-11-12 7:17 ` Manivannan Sadhasivam 2018-11-29 15:29 ` Wei Xu 2018-11-29 15:29 ` Wei Xu 2018-11-29 15:29 ` Wei Xu
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20181023190655.12004-1-manivannan.sadhasivam@linaro.org \ --to=manivannan.sadhasivam@linaro.org \ --cc=amit.kucheria@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=xuwei5@hisilicon.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.