From: Nava kishore Manne <nava.manne@xilinx.com>
To: <p.zabel@pengutronix.de>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>, <michal.simek@xilinx.com>,
<rajanv@xilinx.com>, <jollys@xilinx.com>, <nava.manne@xilinx.com>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <chinnikishore369@gmail.com>
Subject: [PATCH v2 2/3] dt-bindings: reset: Add bindings for ZynqMP reset driver
Date: Fri, 26 Oct 2018 17:54:23 +0530 [thread overview]
Message-ID: <20181026122424.30831-3-nava.manne@xilinx.com> (raw)
In-Reply-To: <20181026122424.30831-1-nava.manne@xilinx.com>
Add documentation to describe Xilinx ZynqMP reset driver
bindings.
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
---
Changes for v2:
-None.
Changes for v1:
-Created a Seperate(New) DT binding file as
suggested by Rob.
Changes for RFC-V3:
-Corrected Commit Msg.
Changes for RFC-V2:
-Moved reset node as a child to firwmare
node.
.../bindings/reset/xlnx,zynqmp-reset.txt | 146 +++++++++++++++++++++
1 file changed, 146 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
new file mode 100644
index 0000000..c42b6a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
@@ -0,0 +1,146 @@
+--------------------------------------------------------------------------
+ = Zynq UltraScale+ MPSoC reset driver binding =
+--------------------------------------------------------------------------
+The Zynq UltraScale+ MPSoC has several different resets.
+
+See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information
+about zynqmp resets.
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required Properties:
+- compatible: "xlnx,zynqmp-reset"
+- #reset-cells: Specifies the number of cells needed to encode reset
+ line, should be 1
+
+Reset outputs:
+ 0 :PCIE config reset.
+ 1 :PCIE bridge block level reset (AXI interface).
+ 2 :PCIE control block level,reset.
+ 3 :Display Port block level reset (includes DPDMA).
+ 4 :FPD WDT reset.
+ 5 :AF_FM5 block level reset.
+ 6 :AF_FM4 block level reset.
+ 7 :AF_FM3 block level reset.
+ 8 :AF_FM2 block level reset.
+ 9 :AF_FM1 block level reset.
+ 10 :AF_FM0 block level reset.
+ 11 :GDMA block level reset.
+ 12 :Pixel Processor (GPU_PP1) block level reset.
+ 13 :Pixel Processor (GPU_PP0) block level reset.
+ 14 :GPU block level reset.
+ 15 :GT block level reset.
+ 16 :Sata block level reset.
+ 17 :ACPU3 power on reset.
+ 18 :ACPU2 power on reset.
+ 19 :ACPU1 power on reset.
+ 20 :ACPU0 power on reset.
+ 21 :APU L2 reset.
+ 22 :ACPU3 reset.
+ 23 :ACPU2 reset.
+ 24 :ACPU1 reset.
+ 25 :ACPU0 reset.
+ 26 :DDR block level reset inside of the DDR Sub System.
+ 27 :APM block level reset inside of the DDR Sub System.
+ 28 :soft reset.
+ 29 :GEM 0 reset.
+ 30 :GEM 1 reset.
+ 31 :GEM 2 reset.
+ 32 :GEM 3 reset.
+ 33 :qspi reset.
+ 34 :uart0 reset.
+ 35 :uart1 reset.
+ 36 :spi0 reset.
+ 37 :spi1 reset.
+ 38 :sdio0 reset.
+ 39 :sdio1 reset.
+ 40 :can0 reset.
+ 41 :can1 reset.
+ 42 :i2c0 reset.
+ 43 :i2c1 reset.
+ 44 :ttc0 reset.
+ 45 :ttc1 reset.
+ 46 :ttc2 reset.
+ 47 :ttc3 reset.
+ 48 :swdt reset.
+ 49 :nand reset.
+ 50 :adma reset.
+ 51 :gpio reset.
+ 52 :iou_cc reset.
+ 53 :timestamp reset.
+ 54 :rpu_r50 reset.
+ 55 :rpu r51 reset.
+ 56 :rpu_amba reset.
+ 57 :ocm reset.
+ 58 :rpu_pge reset.
+ 59 :usb0_core reset.
+ 60 :usb1_core reset.
+ 61 :usb0_hiber reset.
+ 62 :usb1_hiber reset.
+ 63 :usb0_apb reset.
+ 64 :usb1_apb reset.
+ 65 :ipi reset.
+ 66 :apm reset.
+ 67 :rtc reset.
+ 68 :sysmon reset.
+ 69 :afi_fm6 reset.
+ 70 :lpd_swdt reset.
+ 71 :fpd_reset.
+ 72 :rpu_dbg1 reset.
+ 73 :rpu_dbg0 reset.
+ 74 :dbg_lpd reset.
+ 75 :dbg_fpd reset.
+ 76 :apll reset.
+ 77 :dpll reset.
+ 78 :vpll reset.
+ 79 :iopll reset.
+ 80 :rpll reset.
+ 81 :gpio_pl_0 reset.
+ 82 :gpio_pl_1 reset.
+ 83 :gpio_pl_2 reset.
+ 84 :gpio_pl_3 reset.
+ 85 :gpio_pl_4 reset.
+ 86 :gpio_pl_5 reset.
+ 87 :gpio_pl_6 reset.
+ 88 :gpio_pl_7 reset.
+ 89 :gpio_pl_8 reset.
+ 90 :gpio_pl_9 reset.
+ 91 :gpio_pl_10 reset.
+ 92 :gpio_pl_11 reset.
+ 93 :gpio_pl_12 reset.
+ 94 :gpio_pl_13 reset.
+ 95 :gpio_pl_14 reset.
+ 96 :gpio_pl_15 reset.
+ 97 :gpio_pl_16 reset.
+ 98 :gpio_pl_17 reset.
+ 99 :gpio_pl_18 reset.
+ 100 :gpio_pl_19 reset.
+ 101 :gpio_pl_20 reset.
+ 102 :gpio_pl_21 reset.
+ 103 :gpio_pl_22 reset.
+ 104 :gpio_pl_23 reset.
+ 105 :gpio_pl_24 reset.
+ 106 :gpio_pl_25 reset.
+ 107 :gpio_pl_26 reset.
+ 108 :gpio_pl_27 reset.
+ 109 :gpio_pl_28 reset.
+ 110 :gpio_pl_29 reset.
+ 111 :gpio_pl_30 reset.
+ 112 :gpio_pl_31 reset.
+ 113 :rpu_ls reset.
+ 114 :ps_only reset.
+ 115 :pl reset.
+ 116 :ps_pl0 reset
+ 117 :ps_pl1 reset
+ 118 :ps_pl2 reset
+ 119 :ps_pl3 reset
+
+-------
+Example
+-------
+
+ reset-controller {
+ compatible = "xlnx,zynqmp-reset";
+ #reset-cells = <1>;
+ };
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Nava kishore Manne <nava.manne@xilinx.com>
To: p.zabel@pengutronix.de, robh+dt@kernel.org, mark.rutland@arm.com,
michal.simek@xilinx.com, rajanv@xilinx.com, jollys@xilinx.com,
nava.manne@xilinx.com, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, chinnikishore369@gmail.com
Subject: [PATCH v2 2/3] dt-bindings: reset: Add bindings for ZynqMP reset driver
Date: Thu, 25 Oct 2018 12:24:08 +0000 (UTC)
Date: Fri, 26 Oct 2018 17:54:23 +0530 [thread overview]
Message-ID: <20181026122424.30831-3-nava.manne@xilinx.com> (raw)
In-Reply-To: <20181026122424.30831-1-nava.manne@xilinx.com>
Add documentation to describe Xilinx ZynqMP reset driver
bindings.
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
---
Changes for v2:
-None.
Changes for v1:
-Created a Seperate(New) DT binding file as
suggested by Rob.
Changes for RFC-V3:
-Corrected Commit Msg.
Changes for RFC-V2:
-Moved reset node as a child to firwmare
node.
.../bindings/reset/xlnx,zynqmp-reset.txt | 146 +++++++++++++++++++++
1 file changed, 146 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
new file mode 100644
index 0000000..c42b6a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
@@ -0,0 +1,146 @@
+--------------------------------------------------------------------------
+ = Zynq UltraScale+ MPSoC reset driver binding =
+--------------------------------------------------------------------------
+The Zynq UltraScale+ MPSoC has several different resets.
+
+See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information
+about zynqmp resets.
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required Properties:
+- compatible: "xlnx,zynqmp-reset"
+- #reset-cells: Specifies the number of cells needed to encode reset
+ line, should be 1
+
+Reset outputs:
+ 0 :PCIE config reset.
+ 1 :PCIE bridge block level reset (AXI interface).
+ 2 :PCIE control block level,reset.
+ 3 :Display Port block level reset (includes DPDMA).
+ 4 :FPD WDT reset.
+ 5 :AF_FM5 block level reset.
+ 6 :AF_FM4 block level reset.
+ 7 :AF_FM3 block level reset.
+ 8 :AF_FM2 block level reset.
+ 9 :AF_FM1 block level reset.
+ 10 :AF_FM0 block level reset.
+ 11 :GDMA block level reset.
+ 12 :Pixel Processor (GPU_PP1) block level reset.
+ 13 :Pixel Processor (GPU_PP0) block level reset.
+ 14 :GPU block level reset.
+ 15 :GT block level reset.
+ 16 :Sata block level reset.
+ 17 :ACPU3 power on reset.
+ 18 :ACPU2 power on reset.
+ 19 :ACPU1 power on reset.
+ 20 :ACPU0 power on reset.
+ 21 :APU L2 reset.
+ 22 :ACPU3 reset.
+ 23 :ACPU2 reset.
+ 24 :ACPU1 reset.
+ 25 :ACPU0 reset.
+ 26 :DDR block level reset inside of the DDR Sub System.
+ 27 :APM block level reset inside of the DDR Sub System.
+ 28 :soft reset.
+ 29 :GEM 0 reset.
+ 30 :GEM 1 reset.
+ 31 :GEM 2 reset.
+ 32 :GEM 3 reset.
+ 33 :qspi reset.
+ 34 :uart0 reset.
+ 35 :uart1 reset.
+ 36 :spi0 reset.
+ 37 :spi1 reset.
+ 38 :sdio0 reset.
+ 39 :sdio1 reset.
+ 40 :can0 reset.
+ 41 :can1 reset.
+ 42 :i2c0 reset.
+ 43 :i2c1 reset.
+ 44 :ttc0 reset.
+ 45 :ttc1 reset.
+ 46 :ttc2 reset.
+ 47 :ttc3 reset.
+ 48 :swdt reset.
+ 49 :nand reset.
+ 50 :adma reset.
+ 51 :gpio reset.
+ 52 :iou_cc reset.
+ 53 :timestamp reset.
+ 54 :rpu_r50 reset.
+ 55 :rpu r51 reset.
+ 56 :rpu_amba reset.
+ 57 :ocm reset.
+ 58 :rpu_pge reset.
+ 59 :usb0_core reset.
+ 60 :usb1_core reset.
+ 61 :usb0_hiber reset.
+ 62 :usb1_hiber reset.
+ 63 :usb0_apb reset.
+ 64 :usb1_apb reset.
+ 65 :ipi reset.
+ 66 :apm reset.
+ 67 :rtc reset.
+ 68 :sysmon reset.
+ 69 :afi_fm6 reset.
+ 70 :lpd_swdt reset.
+ 71 :fpd_reset.
+ 72 :rpu_dbg1 reset.
+ 73 :rpu_dbg0 reset.
+ 74 :dbg_lpd reset.
+ 75 :dbg_fpd reset.
+ 76 :apll reset.
+ 77 :dpll reset.
+ 78 :vpll reset.
+ 79 :iopll reset.
+ 80 :rpll reset.
+ 81 :gpio_pl_0 reset.
+ 82 :gpio_pl_1 reset.
+ 83 :gpio_pl_2 reset.
+ 84 :gpio_pl_3 reset.
+ 85 :gpio_pl_4 reset.
+ 86 :gpio_pl_5 reset.
+ 87 :gpio_pl_6 reset.
+ 88 :gpio_pl_7 reset.
+ 89 :gpio_pl_8 reset.
+ 90 :gpio_pl_9 reset.
+ 91 :gpio_pl_10 reset.
+ 92 :gpio_pl_11 reset.
+ 93 :gpio_pl_12 reset.
+ 94 :gpio_pl_13 reset.
+ 95 :gpio_pl_14 reset.
+ 96 :gpio_pl_15 reset.
+ 97 :gpio_pl_16 reset.
+ 98 :gpio_pl_17 reset.
+ 99 :gpio_pl_18 reset.
+ 100 :gpio_pl_19 reset.
+ 101 :gpio_pl_20 reset.
+ 102 :gpio_pl_21 reset.
+ 103 :gpio_pl_22 reset.
+ 104 :gpio_pl_23 reset.
+ 105 :gpio_pl_24 reset.
+ 106 :gpio_pl_25 reset.
+ 107 :gpio_pl_26 reset.
+ 108 :gpio_pl_27 reset.
+ 109 :gpio_pl_28 reset.
+ 110 :gpio_pl_29 reset.
+ 111 :gpio_pl_30 reset.
+ 112 :gpio_pl_31 reset.
+ 113 :rpu_ls reset.
+ 114 :ps_only reset.
+ 115 :pl reset.
+ 116 :ps_pl0 reset
+ 117 :ps_pl1 reset
+ 118 :ps_pl2 reset
+ 119 :ps_pl3 reset
+
+-------
+Example
+-------
+
+ reset-controller {
+ compatible = "xlnx,zynqmp-reset";
+ #reset-cells = <1>;
+ };
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: nava.manne@xilinx.com (Nava kishore Manne)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3] dt-bindings: reset: Add bindings for ZynqMP reset driver
Date: Fri, 26 Oct 2018 17:54:23 +0530 [thread overview]
Message-ID: <20181026122424.30831-3-nava.manne@xilinx.com> (raw)
In-Reply-To: <20181026122424.30831-1-nava.manne@xilinx.com>
Add documentation to describe Xilinx ZynqMP reset driver
bindings.
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
---
Changes for v2:
-None.
Changes for v1:
-Created a Seperate(New) DT binding file as
suggested by Rob.
Changes for RFC-V3:
-Corrected Commit Msg.
Changes for RFC-V2:
-Moved reset node as a child to firwmare
node.
.../bindings/reset/xlnx,zynqmp-reset.txt | 146 +++++++++++++++++++++
1 file changed, 146 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
new file mode 100644
index 0000000..c42b6a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
@@ -0,0 +1,146 @@
+--------------------------------------------------------------------------
+ = Zynq UltraScale+ MPSoC reset driver binding =
+--------------------------------------------------------------------------
+The Zynq UltraScale+ MPSoC has several different resets.
+
+See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information
+about zynqmp resets.
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required Properties:
+- compatible: "xlnx,zynqmp-reset"
+- #reset-cells: Specifies the number of cells needed to encode reset
+ line, should be 1
+
+Reset outputs:
+ 0 :PCIE config reset.
+ 1 :PCIE bridge block level reset (AXI interface).
+ 2 :PCIE control block level,reset.
+ 3 :Display Port block level reset (includes DPDMA).
+ 4 :FPD WDT reset.
+ 5 :AF_FM5 block level reset.
+ 6 :AF_FM4 block level reset.
+ 7 :AF_FM3 block level reset.
+ 8 :AF_FM2 block level reset.
+ 9 :AF_FM1 block level reset.
+ 10 :AF_FM0 block level reset.
+ 11 :GDMA block level reset.
+ 12 :Pixel Processor (GPU_PP1) block level reset.
+ 13 :Pixel Processor (GPU_PP0) block level reset.
+ 14 :GPU block level reset.
+ 15 :GT block level reset.
+ 16 :Sata block level reset.
+ 17 :ACPU3 power on reset.
+ 18 :ACPU2 power on reset.
+ 19 :ACPU1 power on reset.
+ 20 :ACPU0 power on reset.
+ 21 :APU L2 reset.
+ 22 :ACPU3 reset.
+ 23 :ACPU2 reset.
+ 24 :ACPU1 reset.
+ 25 :ACPU0 reset.
+ 26 :DDR block level reset inside of the DDR Sub System.
+ 27 :APM block level reset inside of the DDR Sub System.
+ 28 :soft reset.
+ 29 :GEM 0 reset.
+ 30 :GEM 1 reset.
+ 31 :GEM 2 reset.
+ 32 :GEM 3 reset.
+ 33 :qspi reset.
+ 34 :uart0 reset.
+ 35 :uart1 reset.
+ 36 :spi0 reset.
+ 37 :spi1 reset.
+ 38 :sdio0 reset.
+ 39 :sdio1 reset.
+ 40 :can0 reset.
+ 41 :can1 reset.
+ 42 :i2c0 reset.
+ 43 :i2c1 reset.
+ 44 :ttc0 reset.
+ 45 :ttc1 reset.
+ 46 :ttc2 reset.
+ 47 :ttc3 reset.
+ 48 :swdt reset.
+ 49 :nand reset.
+ 50 :adma reset.
+ 51 :gpio reset.
+ 52 :iou_cc reset.
+ 53 :timestamp reset.
+ 54 :rpu_r50 reset.
+ 55 :rpu r51 reset.
+ 56 :rpu_amba reset.
+ 57 :ocm reset.
+ 58 :rpu_pge reset.
+ 59 :usb0_core reset.
+ 60 :usb1_core reset.
+ 61 :usb0_hiber reset.
+ 62 :usb1_hiber reset.
+ 63 :usb0_apb reset.
+ 64 :usb1_apb reset.
+ 65 :ipi reset.
+ 66 :apm reset.
+ 67 :rtc reset.
+ 68 :sysmon reset.
+ 69 :afi_fm6 reset.
+ 70 :lpd_swdt reset.
+ 71 :fpd_reset.
+ 72 :rpu_dbg1 reset.
+ 73 :rpu_dbg0 reset.
+ 74 :dbg_lpd reset.
+ 75 :dbg_fpd reset.
+ 76 :apll reset.
+ 77 :dpll reset.
+ 78 :vpll reset.
+ 79 :iopll reset.
+ 80 :rpll reset.
+ 81 :gpio_pl_0 reset.
+ 82 :gpio_pl_1 reset.
+ 83 :gpio_pl_2 reset.
+ 84 :gpio_pl_3 reset.
+ 85 :gpio_pl_4 reset.
+ 86 :gpio_pl_5 reset.
+ 87 :gpio_pl_6 reset.
+ 88 :gpio_pl_7 reset.
+ 89 :gpio_pl_8 reset.
+ 90 :gpio_pl_9 reset.
+ 91 :gpio_pl_10 reset.
+ 92 :gpio_pl_11 reset.
+ 93 :gpio_pl_12 reset.
+ 94 :gpio_pl_13 reset.
+ 95 :gpio_pl_14 reset.
+ 96 :gpio_pl_15 reset.
+ 97 :gpio_pl_16 reset.
+ 98 :gpio_pl_17 reset.
+ 99 :gpio_pl_18 reset.
+ 100 :gpio_pl_19 reset.
+ 101 :gpio_pl_20 reset.
+ 102 :gpio_pl_21 reset.
+ 103 :gpio_pl_22 reset.
+ 104 :gpio_pl_23 reset.
+ 105 :gpio_pl_24 reset.
+ 106 :gpio_pl_25 reset.
+ 107 :gpio_pl_26 reset.
+ 108 :gpio_pl_27 reset.
+ 109 :gpio_pl_28 reset.
+ 110 :gpio_pl_29 reset.
+ 111 :gpio_pl_30 reset.
+ 112 :gpio_pl_31 reset.
+ 113 :rpu_ls reset.
+ 114 :ps_only reset.
+ 115 :pl reset.
+ 116 :ps_pl0 reset
+ 117 :ps_pl1 reset
+ 118 :ps_pl2 reset
+ 119 :ps_pl3 reset
+
+-------
+Example
+-------
+
+ reset-controller {
+ compatible = "xlnx,zynqmp-reset";
+ #reset-cells = <1>;
+ };
--
2.7.4
next prev parent reply other threads:[~2018-10-25 12:26 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-25 12:23 [PATCH v2 0/3] Add reset driver support for ZynqMP Nava kishore Manne
2018-10-26 12:24 ` Nava kishore Manne
2018-10-26 12:24 ` Nava kishore Manne
2018-10-25 12:24 ` Nava kishore Manne [this message]
2018-10-26 12:24 ` [PATCH v2 2/3] dt-bindings: reset: Add bindings for ZynqMP reset driver Nava kishore Manne
2018-10-26 12:24 ` Nava kishore Manne
2018-10-25 12:24 ` [PATCH v2 1/3] firmware: xilinx: Add reset API's Nava kishore Manne
2018-10-26 12:24 ` Nava kishore Manne
2018-10-26 12:24 ` Nava kishore Manne
2018-10-25 20:43 ` Vesa Jääskeläinen
2018-10-25 20:43 ` Vesa Jääskeläinen
2018-10-25 12:24 ` [PATCH v2 3/3] reset: reset-zynqmp: Adding support for Xilinx zynqmp reset controller Nava kishore Manne
2018-10-26 12:24 ` Nava kishore Manne
2018-10-26 12:24 ` Nava kishore Manne
2018-10-25 20:53 ` Vesa Jääskeläinen
2018-10-25 20:53 ` Vesa Jääskeläinen
2018-10-26 11:08 ` Philipp Zabel
2018-10-26 11:08 ` Philipp Zabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181026122424.30831-3-nava.manne@xilinx.com \
--to=nava.manne@xilinx.com \
--cc=chinnikishore369@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jollys@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=michal.simek@xilinx.com \
--cc=p.zabel@pengutronix.de \
--cc=rajanv@xilinx.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.