From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de> To: Thierry Reding <thierry.reding@gmail.com> Cc: linux-arm-kernel@lists.infradead.org, linux-pwm@vger.kernel.org, Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>, Krzysztof Kozlowski <krzk@kernel.org>, kernel@pengutronix.de Subject: [PATCH 1/4] pwm: Add new helper to initialize a pwm_state variable with defaults Date: Fri, 26 Oct 2018 20:41:55 +0200 [thread overview] Message-ID: <20181026184157.16371-1-u.kleine-koenig@pengutronix.de> (raw) This helps to convert drivers from the legacy API to pwm_apply_state without having to make the aware of the configured polarity (and in some cases even period). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- include/linux/pwm.h | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/include/linux/pwm.h b/include/linux/pwm.h index d5199b507d79..017d1e13e29d 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -522,6 +522,15 @@ static inline void devm_pwm_put(struct device *dev, struct pwm_device *pwm) } #endif +static inline void pwm_get_state_default(const struct pwm_device *pwm, + struct pwm_state *state) +{ + state->period = pwm->args.period; + state->duty_cycle = 0; + state->polarity = pwm->args.polarity; + state->enabled = false; +} + static inline void pwm_apply_args(struct pwm_device *pwm) { struct pwm_state state = { }; @@ -547,9 +556,7 @@ static inline void pwm_apply_args(struct pwm_device *pwm) * pwm_apply_args(). */ - state.enabled = false; - state.polarity = pwm->args.polarity; - state.period = pwm->args.period; + pwm_get_state_default(pwm, &state); pwm_apply_state(pwm, &state); } -- 2.19.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: u.kleine-koenig@pengutronix.de (Uwe Kleine-König) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/4] pwm: Add new helper to initialize a pwm_state variable with defaults Date: Fri, 26 Oct 2018 20:41:55 +0200 [thread overview] Message-ID: <20181026184157.16371-1-u.kleine-koenig@pengutronix.de> (raw) This helps to convert drivers from the legacy API to pwm_apply_state without having to make the aware of the configured polarity (and in some cases even period). Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de> --- include/linux/pwm.h | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/include/linux/pwm.h b/include/linux/pwm.h index d5199b507d79..017d1e13e29d 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -522,6 +522,15 @@ static inline void devm_pwm_put(struct device *dev, struct pwm_device *pwm) } #endif +static inline void pwm_get_state_default(const struct pwm_device *pwm, + struct pwm_state *state) +{ + state->period = pwm->args.period; + state->duty_cycle = 0; + state->polarity = pwm->args.polarity; + state->enabled = false; +} + static inline void pwm_apply_args(struct pwm_device *pwm) { struct pwm_state state = { }; @@ -547,9 +556,7 @@ static inline void pwm_apply_args(struct pwm_device *pwm) * pwm_apply_args(). */ - state.enabled = false; - state.polarity = pwm->args.polarity; - state.period = pwm->args.period; + pwm_get_state_default(pwm, &state); pwm_apply_state(pwm, &state); } -- 2.19.1
next reply other threads:[~2018-10-26 18:41 UTC|newest] Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-10-26 18:41 Uwe Kleine-König [this message] 2018-10-26 18:41 ` [PATCH 1/4] pwm: Add new helper to initialize a pwm_state variable with defaults Uwe Kleine-König 2018-10-26 18:41 ` [PATCH 2/4] ARM: S3C24XX: rx1950: make use of atomic PWM API Uwe Kleine-König 2018-10-26 18:41 ` Uwe Kleine-König 2018-10-29 10:46 ` Krzysztof Kozlowski 2018-10-29 10:46 ` Krzysztof Kozlowski 2018-11-14 9:15 ` Uwe Kleine-König 2018-11-14 9:15 ` Uwe Kleine-König 2018-11-14 12:08 ` Thierry Reding 2018-11-14 12:08 ` Thierry Reding 2018-11-15 8:58 ` Uwe Kleine-König 2018-11-15 8:58 ` Uwe Kleine-König 2018-11-15 16:15 ` Thierry Reding 2018-11-15 16:15 ` Thierry Reding 2018-11-15 21:00 ` Uwe Kleine-König 2018-11-15 21:00 ` Uwe Kleine-König 2018-10-26 18:41 ` [PATCH 3/4] bus: ts-nbus: convert to " Uwe Kleine-König 2018-10-26 18:41 ` Uwe Kleine-König 2018-11-14 12:15 ` Thierry Reding 2018-11-14 12:15 ` Thierry Reding 2018-10-26 18:41 ` [PATCH 4/4] bus: ts-nbus: weaken driver dependency to allow broader compile testing Uwe Kleine-König 2018-10-26 18:41 ` Uwe Kleine-König 2018-11-14 12:18 ` Thierry Reding 2018-11-14 12:18 ` Thierry Reding 2018-10-29 11:33 ` [PATCH 1/4] pwm: Add new helper to initialize a pwm_state variable with defaults Thierry Reding 2018-10-29 11:33 ` Thierry Reding 2018-11-03 14:25 ` Uwe Kleine-König 2018-11-03 14:25 ` Uwe Kleine-König 2018-11-08 15:13 ` Uwe Kleine-König 2018-11-08 15:13 ` Uwe Kleine-König 2018-11-14 12:32 ` Thierry Reding 2018-11-14 12:32 ` Thierry Reding 2018-11-15 9:16 ` Uwe Kleine-König 2018-11-15 9:16 ` Uwe Kleine-König 2018-11-15 16:21 ` Thierry Reding 2018-11-15 16:21 ` Thierry Reding 2018-11-15 21:05 ` Uwe Kleine-König 2018-11-15 21:05 ` Uwe Kleine-König 2018-11-16 10:24 ` Thierry Reding 2018-11-16 10:24 ` Thierry Reding
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20181026184157.16371-1-u.kleine-koenig@pengutronix.de \ --to=u.kleine-koenig@pengutronix.de \ --cc=kernel@pengutronix.de \ --cc=krzk@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-pwm@vger.kernel.org \ --cc=sebastien.bourdelin@savoirfairelinux.com \ --cc=thierry.reding@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.