From: Paul Kocialkowski <contact@paulk.fr>
To: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Thierry Reding <thierry.reding@gmail.com>,
David Airlie <airlied@linux.ie>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>,
linux-sunxi@googlegroups.com,
Paul Kocialkowski <contact@paulk.fr>
Subject: [PATCH NOT FOR MERGE v2 6/7] ARM: dts: sun7i: Add pinmux configuration for LCD0 RGB888 pins
Date: Thu, 1 Nov 2018 21:00:44 +0100 [thread overview]
Message-ID: <20181101200045.6078-7-contact@paulk.fr> (raw)
In-Reply-To: <20181101200045.6078-1-contact@paulk.fr>
This adds the pin muxing definition for configuring the PD pins in LCD0
mode for a RGB888 format to the sun7i device-tree.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 9c52712af241..26f3714eaad0 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -811,6 +811,17 @@
function = "ir1";
};
+ lcd0_rgb888_pins: lcd0-rgb888 {
+ pins = "PD0", "PD1", "PD2", "PD3",
+ "PD4", "PD5", "PD6", "PD7",
+ "PD8", "PD9", "PD10", "PD11",
+ "PD12", "PD13", "PD14", "PD15",
+ "PD16", "PD17", "PD18", "PD19",
+ "PD20", "PD21", "PD22", "PD23",
+ "PD24", "PD25", "PD26", "PD27";
+ function = "lcd0";
+ };
+
mmc0_pins_a: mmc0@0 {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
--
2.19.1
WARNING: multiple messages have this Message-ID (diff)
From: Paul Kocialkowski <contact-W9ppeneeCTY@public.gmane.org>
To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Thierry Reding
<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
David Airlie <airlied-cv59FeDIM0c@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Maxime Ripard
<maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Paul Kocialkowski <contact-W9ppeneeCTY@public.gmane.org>
Subject: [PATCH NOT FOR MERGE v2 6/7] ARM: dts: sun7i: Add pinmux configuration for LCD0 RGB888 pins
Date: Thu, 1 Nov 2018 21:00:44 +0100 [thread overview]
Message-ID: <20181101200045.6078-7-contact@paulk.fr> (raw)
In-Reply-To: <20181101200045.6078-1-contact-W9ppeneeCTY@public.gmane.org>
This adds the pin muxing definition for configuring the PD pins in LCD0
mode for a RGB888 format to the sun7i device-tree.
Signed-off-by: Paul Kocialkowski <contact-W9ppeneeCTY@public.gmane.org>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 9c52712af241..26f3714eaad0 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -811,6 +811,17 @@
function = "ir1";
};
+ lcd0_rgb888_pins: lcd0-rgb888 {
+ pins = "PD0", "PD1", "PD2", "PD3",
+ "PD4", "PD5", "PD6", "PD7",
+ "PD8", "PD9", "PD10", "PD11",
+ "PD12", "PD13", "PD14", "PD15",
+ "PD16", "PD17", "PD18", "PD19",
+ "PD20", "PD21", "PD22", "PD23",
+ "PD24", "PD25", "PD26", "PD27";
+ function = "lcd0";
+ };
+
mmc0_pins_a: mmc0@0 {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
--
2.19.1
WARNING: multiple messages have this Message-ID (diff)
From: contact@paulk.fr (Paul Kocialkowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH NOT FOR MERGE v2 6/7] ARM: dts: sun7i: Add pinmux configuration for LCD0 RGB888 pins
Date: Thu, 1 Nov 2018 21:00:44 +0100 [thread overview]
Message-ID: <20181101200045.6078-7-contact@paulk.fr> (raw)
In-Reply-To: <20181101200045.6078-1-contact@paulk.fr>
This adds the pin muxing definition for configuring the PD pins in LCD0
mode for a RGB888 format to the sun7i device-tree.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 9c52712af241..26f3714eaad0 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -811,6 +811,17 @@
function = "ir1";
};
+ lcd0_rgb888_pins: lcd0-rgb888 {
+ pins = "PD0", "PD1", "PD2", "PD3",
+ "PD4", "PD5", "PD6", "PD7",
+ "PD8", "PD9", "PD10", "PD11",
+ "PD12", "PD13", "PD14", "PD15",
+ "PD16", "PD17", "PD18", "PD19",
+ "PD20", "PD21", "PD22", "PD23",
+ "PD24", "PD25", "PD26", "PD27";
+ function = "lcd0";
+ };
+
mmc0_pins_a: mmc0 at 0 {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
--
2.19.1
next prev parent reply other threads:[~2018-11-01 20:02 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-01 20:00 [PATCH v2 0/7] BL035-RGB-002 3.5" LCD sunxi DRM support Paul Kocialkowski
2018-11-01 20:00 ` Paul Kocialkowski
2018-11-01 20:00 ` Paul Kocialkowski
2018-11-01 20:00 ` [PATCH v2 1/7] drm/sun4i: tcon: Pass encoder instead of using panel for RGB setup Paul Kocialkowski
2018-11-01 20:00 ` Paul Kocialkowski
2018-11-01 20:00 ` Paul Kocialkowski
2018-11-05 8:59 ` Maxime Ripard
2018-11-05 8:59 ` Maxime Ripard
2018-11-05 8:59 ` Maxime Ripard
2018-11-05 10:21 ` Paul Kocialkowski
2018-11-05 10:21 ` Paul Kocialkowski
2018-11-05 10:21 ` Paul Kocialkowski
2018-11-01 20:00 ` [PATCH v2 2/7] drm/sun4i: tcon: Support an active-low DE signal with RGB interface Paul Kocialkowski
2018-11-01 20:00 ` Paul Kocialkowski
2018-11-01 20:00 ` Paul Kocialkowski
2018-11-01 20:00 ` [PATCH v2 3/7] dt-bindings: Add vendor prefix for LeMaker Paul Kocialkowski
2018-11-01 20:00 ` Paul Kocialkowski
2018-11-01 20:00 ` Paul Kocialkowski
2018-11-05 22:08 ` Rob Herring
2018-11-05 22:08 ` Rob Herring
2018-11-05 22:08 ` Rob Herring
2018-11-07 14:26 ` Paul Kocialkowski
2018-11-07 14:26 ` Paul Kocialkowski
2018-11-07 14:26 ` Paul Kocialkowski
2018-11-01 20:00 ` [PATCH v2 4/7] dt-bindings: Add bindings for the LeMaker BL035-RGB-002 LCD panel Paul Kocialkowski
2018-11-01 20:00 ` Paul Kocialkowski
2018-11-01 20:00 ` Paul Kocialkowski
2018-11-05 22:09 ` Rob Herring
2018-11-05 22:09 ` Rob Herring
2018-11-05 22:09 ` Rob Herring
2018-11-01 20:00 ` [PATCH v2 5/7] drm/panel: simple: Add support for the LeMaker BL035-RGB-002 3.5" LCD Paul Kocialkowski
2018-11-01 20:00 ` Paul Kocialkowski
2018-11-01 20:00 ` Paul Kocialkowski
2018-11-01 20:00 ` Paul Kocialkowski [this message]
2018-11-01 20:00 ` [PATCH NOT FOR MERGE v2 6/7] ARM: dts: sun7i: Add pinmux configuration for LCD0 RGB888 pins Paul Kocialkowski
2018-11-01 20:00 ` Paul Kocialkowski
2018-11-01 20:00 ` [PATCH NOT FOR MERGE v2 7/7] ARM: dts: sun7i-a20-bananapi: Add bindings for the LeMaker 3.5" LCD Paul Kocialkowski
2018-11-01 20:00 ` Paul Kocialkowski
2018-11-01 20:00 ` Paul Kocialkowski
2018-11-01 20:33 ` [PATCH v2 0/7] BL035-RGB-002 3.5" LCD sunxi DRM support Paul Kocialkowski
2018-11-01 20:33 ` Paul Kocialkowski
2018-11-01 20:33 ` Paul Kocialkowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181101200045.6078-7-contact@paulk.fr \
--to=contact@paulk.fr \
--cc=airlied@linux.ie \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.