All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anatolij Gustschin <agust@denx.de>
To: linux-fpga@vger.kernel.org
Cc: atull@kernel.org, mdf@kernel.org
Subject: [PATCH v3] fpga: mgr: altera-ps-spi: enable usage on non-dt platforms
Date: Thu,  1 Nov 2018 22:22:31 +0100	[thread overview]
Message-ID: <20181101212231.9125-1-agust@denx.de> (raw)

Driver probing fails on non-dt platforms since of_match_device()
always returns NULL here. Add device names and matching driver
data to the spi_device_id table. This allows driver binding to
dynamically added PS-SPI devices (e.g. added via spi_new_device()
after hot-plugging).

Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
Changes in v3:
 - don't use pointers to device data struct in driver_data

Changes in v2:
 - removed not necessary braces {}
 - dropped not needed !id check

 drivers/fpga/altera-ps-spi.c | 36 +++++++++++++++++++++++++++++++-----
 1 file changed, 31 insertions(+), 5 deletions(-)

diff --git a/drivers/fpga/altera-ps-spi.c b/drivers/fpga/altera-ps-spi.c
index 33aafda50af5..78d809194b7d 100644
--- a/drivers/fpga/altera-ps-spi.c
+++ b/drivers/fpga/altera-ps-spi.c
@@ -75,6 +75,11 @@ static struct altera_ps_data a10_data = {
 	.t_st2ck_us = 10, /* min(t_ST2CK) */
 };
 
+static const struct altera_ps_data *altera_ps_data_map[] = {
+	&c5_data,
+	&a10_data,
+};
+
 static const struct of_device_id of_ef_match[] = {
 	{ .compatible = "altr,fpga-passive-serial", .data = &c5_data },
 	{ .compatible = "altr,fpga-arria10-passive-serial", .data = &a10_data },
@@ -234,6 +239,19 @@ static const struct fpga_manager_ops altera_ps_ops = {
 	.write_complete = altera_ps_write_complete,
 };
 
+static const struct altera_ps_data *id_to_data(const struct spi_device_id *id)
+{
+	const struct altera_ps_data *data;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(altera_ps_data_map); i++) {
+		data = altera_ps_data_map[i];
+		if (data && data->devtype == id->driver_data)
+			return data;
+	}
+	return NULL;
+}
+
 static int altera_ps_probe(struct spi_device *spi)
 {
 	struct altera_ps_conf *conf;
@@ -244,11 +262,17 @@ static int altera_ps_probe(struct spi_device *spi)
 	if (!conf)
 		return -ENOMEM;
 
-	of_id = of_match_device(of_ef_match, &spi->dev);
-	if (!of_id)
-		return -ENODEV;
+	if (spi->dev.of_node) {
+		of_id = of_match_device(of_ef_match, &spi->dev);
+		if (!of_id)
+			return -ENODEV;
+		conf->data = of_id->data;
+	} else {
+		conf->data = id_to_data(spi_get_device_id(spi));
+		if (!conf->data)
+			return -ENODEV;
+	}
 
-	conf->data = of_id->data;
 	conf->spi = spi;
 	conf->config = devm_gpiod_get(&spi->dev, "nconfig", GPIOD_OUT_LOW);
 	if (IS_ERR(conf->config)) {
@@ -294,7 +318,9 @@ static int altera_ps_remove(struct spi_device *spi)
 }
 
 static const struct spi_device_id altera_ps_spi_ids[] = {
-	{"cyclone-ps-spi", 0},
+	{ "cyclone-ps-spi", CYCLONE5 },
+	{ "fpga-passive-serial", CYCLONE5 },
+	{ "fpga-arria10-passive-serial", ARRIA10 },
 	{}
 };
 MODULE_DEVICE_TABLE(spi, altera_ps_spi_ids);
-- 
2.17.1

             reply	other threads:[~2018-11-01 21:22 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-01 21:22 Anatolij Gustschin [this message]
2018-11-12 21:15 ` [PATCH v3] fpga: mgr: altera-ps-spi: enable usage on non-dt platforms Anatolij Gustschin
2018-11-15 22:24 ` Alan Tull
2018-11-16  0:02   ` Anatolij Gustschin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181101212231.9125-1-agust@denx.de \
    --to=agust@denx.de \
    --cc=atull@kernel.org \
    --cc=linux-fpga@vger.kernel.org \
    --cc=mdf@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.