From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: sean.wang@kernel.org, linus.walleij@linaro.org,
matthias.bgg@gmail.com, robh+dt@kernel.org
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, amit.kucheria@linaro.org,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH v3 3/4] arm64: dts: mediatek: x20: Add pinmux support for UART1
Date: Wed, 7 Nov 2018 23:18:43 +0530 [thread overview]
Message-ID: <20181107174844.5381-4-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20181107174844.5381-1-manivannan.sadhasivam@linaro.org>
Add pinmux support for UART1 on MediatekX20 Development board based
on Mediatek MT6797 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts | 2 ++
arch/arm64/boot/dts/mediatek/mt6797.dtsi | 7 +++++++
2 files changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
index 742938a1a548..13939d55b85b 100644
--- a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
+++ b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
@@ -30,4 +30,6 @@
&uart1 {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_a>;
};
diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
index 231230d32d09..a64bb84bdec3 100644
--- a/arch/arm64/boot/dts/mediatek/mt6797.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -141,6 +141,13 @@
"iocfgr", "iocfgt";
gpio-controller;
#gpio-cells = <2>;
+
+ uart1_pins_a: uart1 {
+ pins1 {
+ pinmux = <MT6797_GPIO232__FUNC_URXD1>,
+ <MT6797_GPIO233__FUNC_UTXD1>;
+ };
+ };
};
scpsys: scpsys@10006000 {
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: manivannan.sadhasivam@linaro.org (Manivannan Sadhasivam)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/4] arm64: dts: mediatek: x20: Add pinmux support for UART1
Date: Wed, 7 Nov 2018 23:18:43 +0530 [thread overview]
Message-ID: <20181107174844.5381-4-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20181107174844.5381-1-manivannan.sadhasivam@linaro.org>
Add pinmux support for UART1 on MediatekX20 Development board based
on Mediatek MT6797 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts | 2 ++
arch/arm64/boot/dts/mediatek/mt6797.dtsi | 7 +++++++
2 files changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
index 742938a1a548..13939d55b85b 100644
--- a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
+++ b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
@@ -30,4 +30,6 @@
&uart1 {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_a>;
};
diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
index 231230d32d09..a64bb84bdec3 100644
--- a/arch/arm64/boot/dts/mediatek/mt6797.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -141,6 +141,13 @@
"iocfgr", "iocfgt";
gpio-controller;
#gpio-cells = <2>;
+
+ uart1_pins_a: uart1 {
+ pins1 {
+ pinmux = <MT6797_GPIO232__FUNC_URXD1>,
+ <MT6797_GPIO233__FUNC_UTXD1>;
+ };
+ };
};
scpsys: scpsys at 10006000 {
--
2.17.1
next prev parent reply other threads:[~2018-11-07 17:48 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-07 17:48 [PATCH v3 0/4] Add initial pinctrl support for MT6797 SoC Manivannan Sadhasivam
2018-11-07 17:48 ` Manivannan Sadhasivam
2018-11-07 17:48 ` [PATCH v3 1/4] dt-bindings: pinctrl: Add devicetree bindings for MT6797 SoC Pinctrl Manivannan Sadhasivam
2018-11-07 17:48 ` Manivannan Sadhasivam
2018-11-08 2:11 ` Yingjoe Chen
2018-11-08 2:11 ` Yingjoe Chen
2018-11-08 2:11 ` Yingjoe Chen
2018-11-08 4:05 ` Manivannan Sadhasivam
2018-11-08 4:05 ` Manivannan Sadhasivam
2018-11-15 10:04 ` Linus Walleij
2018-11-15 10:04 ` Linus Walleij
2018-11-15 10:04 ` Linus Walleij
2018-12-03 1:08 ` Matthias Brugger
2018-12-03 1:08 ` Matthias Brugger
2018-12-03 1:08 ` Matthias Brugger
2018-12-05 12:00 ` Linus Walleij
2018-12-05 12:00 ` Linus Walleij
2018-12-05 12:00 ` Linus Walleij
2018-12-07 18:41 ` Olof Johansson
2018-12-07 18:41 ` Olof Johansson
2018-12-07 18:41 ` Olof Johansson
2018-12-07 21:42 ` Sean Wang
2018-12-07 21:42 ` Sean Wang
2018-12-11 15:41 ` Olof Johansson
2018-12-11 15:41 ` Olof Johansson
2018-11-07 17:48 ` [PATCH v3 2/4] arm64: dts: mediatek: mt6797: Add pinctrl support Manivannan Sadhasivam
2018-11-07 17:48 ` Manivannan Sadhasivam
2018-11-15 10:06 ` Linus Walleij
2018-11-15 10:06 ` Linus Walleij
2018-11-15 10:06 ` Linus Walleij
2018-11-29 11:49 ` Matthias Brugger
2018-11-07 17:48 ` Manivannan Sadhasivam [this message]
2018-11-07 17:48 ` [PATCH v3 3/4] arm64: dts: mediatek: x20: Add pinmux support for UART1 Manivannan Sadhasivam
2018-11-15 10:07 ` Linus Walleij
2018-11-15 10:07 ` Linus Walleij
2018-11-15 10:07 ` Linus Walleij
2018-11-29 11:49 ` Matthias Brugger
2018-11-07 17:48 ` [PATCH v3 4/4] pinctrl: mediatek: Add initial pinctrl driver for MT6797 SoC Manivannan Sadhasivam
2018-11-07 17:48 ` Manivannan Sadhasivam
2018-11-15 10:06 ` Linus Walleij
2018-11-15 10:06 ` Linus Walleij
2018-11-15 10:06 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181107174844.5381-4-manivannan.sadhasivam@linaro.org \
--to=manivannan.sadhasivam@linaro.org \
--cc=amit.kucheria@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sean.wang@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.