From: Andy Shevchenko <andriy.shevchenko@linux.intel.com> To: MyungJoo Ham <myungjoo.ham@samsung.com>, Chanwoo Choi <cw00.choi@samsung.com>, linux-usb@vger.kernel.org, Felipe Balbi <balbi@kernel.org>, Guenter Roeck <linux@roeck-us.net>, Heikki Krogerus <heikki.krogerus@linux.intel.com>, Roger Quadros <rogerq@ti.com>, linux-pm@vger.kernel.org, "Rafael J. Wysocki" <rafael@kernel.org>, Sebastian Reichel <sre@kernel.org>, linux-omap@vger.kernel.org, Darren Hart <dvhart@infradead.org>, platform-driver-x86@vger.kernel.org, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, linux-kernel@vger.kernel.org, Chen-Yu Tsai <wens@csie.org>, Hans de Goede <hdegoede@redhat.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Subject: [PATCH v1 3/5] staging: typec: fusb302: Rename fcs,extcon-name to linux,extcon-name Date: Sat, 10 Nov 2018 20:10:59 +0200 [thread overview] Message-ID: <20181110181101.24557-3-andriy.shevchenko@linux.intel.com> (raw) In-Reply-To: <20181110181101.24557-1-andriy.shevchenko@linux.intel.com> Since we are going to use the same in Designware USB 3 driver, rename the property to be consistent across the drivers. No functional change intended. Cc: Hans de Goede <hdegoede@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/platform/x86/intel_cht_int33fe.c | 2 +- drivers/usb/typec/tcpm/fusb302.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c index 464fe93657b5..87cbf18d0305 100644 --- a/drivers/platform/x86/intel_cht_int33fe.c +++ b/drivers/platform/x86/intel_cht_int33fe.c @@ -79,7 +79,7 @@ static const struct property_entry max17047_props[] = { }; static const struct property_entry fusb302_props[] = { - PROPERTY_ENTRY_STRING("fcs,extcon-name", "cht_wcove_pwrsrc"), + PROPERTY_ENTRY_STRING("linux,extcon-name", "cht_wcove_pwrsrc"), PROPERTY_ENTRY_U32("fcs,max-sink-microvolt", 12000000), PROPERTY_ENTRY_U32("fcs,max-sink-microamp", 3000000), PROPERTY_ENTRY_U32("fcs,max-sink-microwatt", 36000000), diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c index 6d332066202b..62816ac571a0 100644 --- a/drivers/usb/typec/tcpm/fusb302.c +++ b/drivers/usb/typec/tcpm/fusb302.c @@ -1765,7 +1765,7 @@ static int fusb302_probe(struct i2c_client *client, * to be set by the platform code which also registers the i2c client * for the fusb302. */ - if (device_property_read_string(dev, "fcs,extcon-name", &name) == 0) { + if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) { chip->extcon = extcon_get_extcon_dev(name); if (IS_ERR(chip->extcon)) return PTR_ERR(chip->extcon); -- 2.19.1
WARNING: multiple messages have this Message-ID (diff)
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com> To: MyungJoo Ham <myungjoo.ham@samsung.com>, Chanwoo Choi <cw00.choi@samsung.com>, linux-usb@vger.kernel.org, Felipe Balbi <balbi@kernel.org>, Guenter Roeck <linux@roeck-us.net>, Heikki Krogerus <heikki.krogerus@linux.intel.com>, Roger Quadros <rogerq@ti.com>, linux-pm@vger.kernel.org, "Rafael J. Wysocki" <rafael@kernel.org>, Sebastian Reichel <sre@kernel.org>, linux-omap@vger.kernel.org, Darren Hart <dvhart@infradead.org>, platform-driver-x86@vger.kernel.org, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, linux-kernel@vger.kernel.org, Chen-Yu Tsai <wens@csie.org>, Hans de Goede <hdegoede@redhat.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Subject: [v1,3/5] staging: typec: fusb302: Rename fcs,extcon-name to linux,extcon-name Date: Sat, 10 Nov 2018 20:10:59 +0200 [thread overview] Message-ID: <20181110181101.24557-3-andriy.shevchenko@linux.intel.com> (raw) Since we are going to use the same in Designware USB 3 driver, rename the property to be consistent across the drivers. No functional change intended. Cc: Hans de Goede <hdegoede@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/platform/x86/intel_cht_int33fe.c | 2 +- drivers/usb/typec/tcpm/fusb302.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c index 464fe93657b5..87cbf18d0305 100644 --- a/drivers/platform/x86/intel_cht_int33fe.c +++ b/drivers/platform/x86/intel_cht_int33fe.c @@ -79,7 +79,7 @@ static const struct property_entry max17047_props[] = { }; static const struct property_entry fusb302_props[] = { - PROPERTY_ENTRY_STRING("fcs,extcon-name", "cht_wcove_pwrsrc"), + PROPERTY_ENTRY_STRING("linux,extcon-name", "cht_wcove_pwrsrc"), PROPERTY_ENTRY_U32("fcs,max-sink-microvolt", 12000000), PROPERTY_ENTRY_U32("fcs,max-sink-microamp", 3000000), PROPERTY_ENTRY_U32("fcs,max-sink-microwatt", 36000000), diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c index 6d332066202b..62816ac571a0 100644 --- a/drivers/usb/typec/tcpm/fusb302.c +++ b/drivers/usb/typec/tcpm/fusb302.c @@ -1765,7 +1765,7 @@ static int fusb302_probe(struct i2c_client *client, * to be set by the platform code which also registers the i2c client * for the fusb302. */ - if (device_property_read_string(dev, "fcs,extcon-name", &name) == 0) { + if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) { chip->extcon = extcon_get_extcon_dev(name); if (IS_ERR(chip->extcon)) return PTR_ERR(chip->extcon);
next prev parent reply other threads:[~2018-11-10 18:11 UTC|newest] Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-11-10 18:10 [PATCH v1 1/5] drivercore: Revert "deferral race condition fix" Andy Shevchenko 2018-11-10 18:10 ` [v1,1/5] " Andy Shevchenko 2018-11-10 18:10 ` [PATCH v1 2/5] extcon: Return -EPROBE_DEFER when extcon device is not found Andy Shevchenko 2018-11-10 18:10 ` [v1,2/5] " Andy Shevchenko 2018-11-10 18:39 ` [PATCH v1 2/5] " Guenter Roeck 2018-11-10 18:39 ` [v1,2/5] " Guenter Roeck 2018-11-11 0:06 ` [PATCH v1 2/5] " Sebastian Reichel 2018-11-11 0:06 ` [v1,2/5] " Sebastian Reichel 2018-11-12 0:24 ` [PATCH v1 2/5] " Chanwoo Choi 2018-11-12 0:24 ` [v1,2/5] " Chanwoo Choi 2018-11-13 23:52 ` [PATCH v1 2/5] " Chanwoo Choi 2018-11-13 23:52 ` [v1,2/5] " Chanwoo Choi 2018-11-14 8:35 ` [PATCH v1 2/5] " Andy Shevchenko 2018-11-14 8:35 ` [v1,2/5] " Andy Shevchenko 2018-11-14 9:13 ` [PATCH v1 2/5] " Chanwoo Choi 2018-11-14 9:13 ` [v1,2/5] " Chanwoo Choi 2018-11-14 9:36 ` [PATCH v1 2/5] " Andy Shevchenko 2018-11-14 9:36 ` [v1,2/5] " Andy Shevchenko 2018-11-14 9:48 ` [PATCH v1 2/5] " Chanwoo Choi 2018-11-14 9:48 ` [v1,2/5] " Chanwoo Choi 2018-11-14 10:20 ` [PATCH v1 2/5] " Andy Shevchenko 2018-11-14 10:20 ` [v1,2/5] " Andy Shevchenko 2018-11-14 11:05 ` [PATCH v1 2/5] " Chanwoo Choi 2018-11-14 11:05 ` [v1,2/5] " Chanwoo Choi 2018-11-14 11:17 ` [PATCH v1 2/5] " Andy Shevchenko 2018-11-14 11:17 ` [v1,2/5] " Andy Shevchenko 2018-11-14 14:04 ` [PATCH v1 2/5] " Andy Shevchenko 2018-11-14 14:04 ` [v1,2/5] " Andy Shevchenko 2018-11-15 1:16 ` [PATCH v1 2/5] " Chanwoo Choi 2018-11-15 1:16 ` [v1,2/5] " Chanwoo Choi 2018-11-12 11:47 ` [PATCH v1 2/5] " Heikki Krogerus 2018-11-12 11:47 ` [v1,2/5] " Heikki Krogerus 2018-11-10 18:10 ` Andy Shevchenko [this message] 2018-11-10 18:10 ` [v1,3/5] staging: typec: fusb302: Rename fcs,extcon-name to linux,extcon-name Andy Shevchenko 2018-11-10 18:40 ` [PATCH v1 3/5] " Guenter Roeck 2018-11-10 18:40 ` [v1,3/5] " Guenter Roeck 2018-11-10 18:11 ` [PATCH v1 4/5] usb: dwc3: drd: Switch to device property for 'extcon' handling Andy Shevchenko 2018-11-10 18:11 ` [v1,4/5] " Andy Shevchenko 2018-11-12 11:47 ` [PATCH v1 4/5] " Felipe Balbi 2018-11-12 11:47 ` [v1,4/5] " Felipe Balbi 2018-11-12 11:47 ` [PATCH v1 4/5] " Felipe Balbi 2018-11-10 18:11 ` [PATCH v1 5/5] usb: dwc3: drd: Add support for DR detection through extcon Andy Shevchenko 2018-11-10 18:11 ` [v1,5/5] " Andy Shevchenko 2018-11-10 18:26 ` [PATCH v1 1/5] drivercore: Revert "deferral race condition fix" Greg Kroah-Hartman 2018-11-10 18:26 ` [v1,1/5] " Greg Kroah-Hartman 2018-11-10 18:36 ` [PATCH v1 1/5] " Andy Shevchenko 2018-11-10 18:36 ` [v1,1/5] " Andy Shevchenko 2018-11-11 11:45 ` [PATCH v1 1/5] " Hans de Goede 2018-11-11 11:45 ` [v1,1/5] " Hans de Goede 2018-11-11 13:04 ` [PATCH v1 1/5] " Andy Shevchenko 2018-11-11 19:26 ` Rob Herring 2018-11-11 23:53 ` Andy Shevchenko 2018-11-14 23:25 ` Grant Likely 2018-11-12 16:11 ` Peter Ujfalusi 2018-11-12 16:11 ` [v1,1/5] " Peter Ujfalusi 2018-11-12 16:11 ` [PATCH v1 1/5] " Peter Ujfalusi 2018-11-14 0:33 ` Mark Brown 2018-11-14 0:33 ` [v1,1/5] " Mark Brown 2018-11-14 8:45 ` [PATCH v1 1/5] " Andy Shevchenko 2018-11-14 8:45 ` [v1,1/5] " Andy Shevchenko 2018-11-14 8:45 ` [PATCH v1 1/5] " Andy Shevchenko 2018-11-14 10:19 ` Peter Ujfalusi 2018-11-14 10:19 ` [v1,1/5] " Peter Ujfalusi 2018-11-14 10:19 ` [PATCH v1 1/5] " Peter Ujfalusi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20181110181101.24557-3-andriy.shevchenko@linux.intel.com \ --to=andriy.shevchenko@linux.intel.com \ --cc=balbi@kernel.org \ --cc=cw00.choi@samsung.com \ --cc=dvhart@infradead.org \ --cc=gregkh@linuxfoundation.org \ --cc=hdegoede@redhat.com \ --cc=heikki.krogerus@linux.intel.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=linux@roeck-us.net \ --cc=myungjoo.ham@samsung.com \ --cc=platform-driver-x86@vger.kernel.org \ --cc=rafael@kernel.org \ --cc=rogerq@ti.com \ --cc=sre@kernel.org \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.