All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: [PATCH v10 15/23] drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs
Date: Tue, 20 Nov 2018 10:37:28 -0800	[thread overview]
Message-ID: <20181120183736.28054-16-manasi.d.navare@intel.com> (raw)
In-Reply-To: <20181120183736.28054-1-manasi.d.navare@intel.com>

Infoframes are used to send secondary data packets. This patch
adds support for DSC Picture parameter set secondary data packets
in the existing write_infoframe helpers.

v3:
* Unused variables cleanup (Ville)
v2:
* Rebase on drm-tip (Manasi)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h   |  1 +
 drivers/gpu/drm/i915/intel_hdmi.c | 21 +++++++++++++++++++--
 2 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index fe4b913e46ac..21e82c03cf80 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4567,6 +4567,7 @@ enum {
  * of the infoframe structure specified by CEA-861. */
 #define   VIDEO_DIP_DATA_SIZE	32
 #define   VIDEO_DIP_VSC_DATA_SIZE	36
+#define   VIDEO_DIP_PPS_DATA_SIZE	132
 #define VIDEO_DIP_CTL		_MMIO(0x61170)
 /* Pre HSW: */
 #define   VIDEO_DIP_ENABLE		(1 << 31)
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index bc5b945f9a71..ae751679047c 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -115,6 +115,8 @@ static u32 hsw_infoframe_enable(unsigned int type)
 	switch (type) {
 	case DP_SDP_VSC:
 		return VIDEO_DIP_ENABLE_VSC_HSW;
+	case DP_SDP_PPS:
+		return VDIP_ENABLE_PPS;
 	case HDMI_INFOFRAME_TYPE_AVI:
 		return VIDEO_DIP_ENABLE_AVI_HSW;
 	case HDMI_INFOFRAME_TYPE_SPD:
@@ -136,6 +138,8 @@ hsw_dip_data_reg(struct drm_i915_private *dev_priv,
 	switch (type) {
 	case DP_SDP_VSC:
 		return HSW_TVIDEO_DIP_VSC_DATA(cpu_transcoder, i);
+	case DP_SDP_PPS:
+		return ICL_VIDEO_DIP_PPS_DATA(cpu_transcoder, i);
 	case HDMI_INFOFRAME_TYPE_AVI:
 		return HSW_TVIDEO_DIP_AVI_DATA(cpu_transcoder, i);
 	case HDMI_INFOFRAME_TYPE_SPD:
@@ -148,6 +152,18 @@ hsw_dip_data_reg(struct drm_i915_private *dev_priv,
 	}
 }
 
+static int hsw_dip_data_size(unsigned int type)
+{
+	switch (type) {
+	case DP_SDP_VSC:
+		return VIDEO_DIP_VSC_DATA_SIZE;
+	case DP_SDP_PPS:
+		return VIDEO_DIP_PPS_DATA_SIZE;
+	default:
+		return VIDEO_DIP_DATA_SIZE;
+	}
+}
+
 static void g4x_write_infoframe(struct intel_encoder *encoder,
 				const struct intel_crtc_state *crtc_state,
 				unsigned int type,
@@ -382,11 +398,12 @@ static void hsw_write_infoframe(struct intel_encoder *encoder,
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
 	i915_reg_t ctl_reg = HSW_TVIDEO_DIP_CTL(cpu_transcoder);
-	int data_size = type == DP_SDP_VSC ?
-		VIDEO_DIP_VSC_DATA_SIZE : VIDEO_DIP_DATA_SIZE;
+	int data_size;
 	int i;
 	u32 val = I915_READ(ctl_reg);
 
+	data_size = hsw_dip_data_size(type);
+
 	val &= ~hsw_infoframe_enable(type);
 	I915_WRITE(ctl_reg, val);
 
-- 
2.19.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2018-11-20 18:37 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-20 18:37 [PATCH v10 00/23] Respin of remaining DSC + FEC patches Manasi Navare
2018-11-20 18:37 ` [PATCH v10 01/23] drm/dsc: Modify DRM helper to return complete DSC color depth capabilities Manasi Navare
2018-11-27 13:47   ` Ville Syrjälä
2018-11-27 17:44   ` Srivatsa, Anusha
2018-11-20 18:37 ` [PATCH v10 02/23] drm/dsc: Define Display Stream Compression PPS infoframe Manasi Navare
2018-11-20 18:37 ` [PATCH v10 03/23] drm/dsc: Define VESA Display Stream Compression Capabilities Manasi Navare
2018-11-20 18:37 ` [PATCH v10 04/23] drm/dsc: Define Rate Control values that do not change over configurations Manasi Navare
2018-11-20 18:37 ` [PATCH v10 05/23] drm/dsc: Add helpers for DSC picture parameter set infoframes Manasi Navare
2018-11-20 18:37 ` [PATCH v10 06/23] drm/dsc: Define the DSC 1.1 and 1.2 Line Buffer depth constants Manasi Navare
2018-11-20 18:37 ` [PATCH v10 07/23] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-11-20 18:37 ` [PATCH v10 08/23] drm/i915/dp: Compute DSC pipe config in atomic check Manasi Navare
2018-11-27 13:57   ` Ville Syrjälä
2018-11-27 17:29     ` Manasi Navare
2018-11-20 18:37 ` [PATCH v10 09/23] drm/i915/dp: Do not enable PSR2 if DSC is enabled Manasi Navare
2018-11-20 18:37 ` [PATCH v10 10/23] drm/i915/dsc: Define & Compute VESA DSC params Manasi Navare
2018-11-20 18:37 ` [PATCH v10 11/23] drm/i915/dsc: Compute Rate Control parameters for DSC Manasi Navare
2018-11-20 18:37 ` [PATCH v10 12/23] drm/i915/dp: Enable/Disable DSC in DP Sink Manasi Navare
2018-11-20 18:37 ` [PATCH v10 13/23] drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI Manasi Navare
2018-11-20 18:37 ` [PATCH v10 14/23] drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling Manasi Navare
2018-11-20 18:37 ` Manasi Navare [this message]
2018-11-20 18:37 ` [PATCH v10 16/23] drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes Manasi Navare
2018-11-20 18:37 ` [PATCH v10 17/23] drm/i915/dp: Configure Display stream splitter registers during DSC enable Manasi Navare
2018-11-20 18:37 ` [PATCH v10 18/23] drm/i915/dp: Disable DSC in source by disabling DSS CTL bits Manasi Navare
2018-11-20 18:37 ` [PATCH v10 19/23] drm/i915/dsc: Enable and disable appropriate power wells for VDSC Manasi Navare
2018-11-20 18:37 ` [PATCH v10 20/23] i915/dp/fec: Add fec_enable to the crtc state Manasi Navare
2018-11-27 17:46   ` Manasi Navare
2018-11-20 18:37 ` [PATCH v10 21/23] drm/i915/fec: Set FEC_READY in FEC_CONFIGURATION Manasi Navare
2018-11-20 18:37 ` [PATCH v10 22/23] i915/dp/fec: Configure the Forward Error Correction bits Manasi Navare
2018-11-27 17:47   ` Manasi Navare
2018-11-20 18:37 ` [PATCH v10 23/23] drm/i915/fec: Disable FEC state Manasi Navare
2018-11-20 18:58 ` ✗ Fi.CI.CHECKPATCH: warning for Respin of remaining DSC + FEC patches Patchwork
2018-11-20 19:06 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-11-20 19:29 ` ✓ Fi.CI.BAT: success " Patchwork
2018-11-21  6:54 ` ✓ Fi.CI.IGT: " Patchwork
2018-11-29 20:57 ` [PATCH v10 00/23] " Manasi Navare

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181120183736.28054-16-manasi.d.navare@intel.com \
    --to=manasi.d.navare@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.