All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lubomir Rintel <lkundrak@v3.sk>
To: arm@kernel.org, Olof Johansson <olof@lixom.net>,
	Arnd Bergmann <arnd@arndb.de>
Cc: Eric Miao <eric.y.miao@gmail.com>,
	Haojian Zhuang <haojian.zhuang@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	Robert Jarzmik <robert.jarzmik@free.fr>,
	Pavel Machek <pavel@ucw.cz>, James Cameron <quozl@laptop.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Lubomir Rintel <lkundrak@v3.sk>
Subject: [PATCH v4 17/20] ARM: mmp: add a pxa-usb-phy device
Date: Wed, 28 Nov 2018 18:53:21 +0100	[thread overview]
Message-ID: <20181128175324.163202-18-lkundrak@v3.sk> (raw)
In-Reply-To: <20181128175324.163202-1-lkundrak@v3.sk>

This is to replace the USB PHY initialization code (pxa_usb_phy_init(),
pxa_usb_phy_deinit()) with a proper PHY driver.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 arch/arm/mach-mmp/devices.c | 21 +++++++++++++++++++++
 arch/arm/mach-mmp/pxa910.h  |  1 +
 2 files changed, 22 insertions(+)

diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
index 0fca63c80e1a..822b8be042b9 100644
--- a/arch/arm/mach-mmp/devices.c
+++ b/arch/arm/mach-mmp/devices.c
@@ -240,6 +240,27 @@ void pxa_usb_phy_deinit(void __iomem *phy_reg)
 #if IS_ENABLED(CONFIG_USB_SUPPORT)
 static u64 __maybe_unused usb_dma_mask = ~(u32)0;
 
+#if IS_ENABLED(CONFIG_PHY_PXA_USB)
+struct resource pxa168_usb_phy_resources[] = {
+	[0] = {
+		.start	= PXA168_U2O_PHYBASE,
+		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device pxa168_device_usb_phy = {
+	.name		= "pxa-usb-phy",
+	.id		= -1,
+	.resource	= pxa168_usb_phy_resources,
+	.num_resources	= ARRAY_SIZE(pxa168_usb_phy_resources),
+	.dev		=  {
+		.dma_mask	= &usb_dma_mask,
+		.coherent_dma_mask = 0xffffffff,
+	}
+};
+#endif /* CONFIG_PHY_PXA_USB */
+
 #if IS_ENABLED(CONFIG_USB_MV_UDC)
 struct resource pxa168_u2o_resources[] = {
 	/* regbase */
diff --git a/arch/arm/mach-mmp/pxa910.h b/arch/arm/mach-mmp/pxa910.h
index 42009c349eae..2dfe38e4acc1 100644
--- a/arch/arm/mach-mmp/pxa910.h
+++ b/arch/arm/mach-mmp/pxa910.h
@@ -22,6 +22,7 @@ extern struct pxa_device_desc pxa910_device_pwm2;
 extern struct pxa_device_desc pxa910_device_pwm3;
 extern struct pxa_device_desc pxa910_device_pwm4;
 extern struct pxa_device_desc pxa910_device_nand;
+extern struct platform_device pxa168_device_usb_phy;
 extern struct platform_device pxa168_device_u2o;
 extern struct platform_device pxa168_device_u2ootg;
 extern struct platform_device pxa168_device_u2oehci;
-- 
2.19.1


WARNING: multiple messages have this Message-ID (diff)
From: lkundrak@v3.sk (Lubomir Rintel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 17/20] ARM: mmp: add a pxa-usb-phy device
Date: Wed, 28 Nov 2018 18:53:21 +0100	[thread overview]
Message-ID: <20181128175324.163202-18-lkundrak@v3.sk> (raw)
In-Reply-To: <20181128175324.163202-1-lkundrak@v3.sk>

This is to replace the USB PHY initialization code (pxa_usb_phy_init(),
pxa_usb_phy_deinit()) with a proper PHY driver.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 arch/arm/mach-mmp/devices.c | 21 +++++++++++++++++++++
 arch/arm/mach-mmp/pxa910.h  |  1 +
 2 files changed, 22 insertions(+)

diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
index 0fca63c80e1a..822b8be042b9 100644
--- a/arch/arm/mach-mmp/devices.c
+++ b/arch/arm/mach-mmp/devices.c
@@ -240,6 +240,27 @@ void pxa_usb_phy_deinit(void __iomem *phy_reg)
 #if IS_ENABLED(CONFIG_USB_SUPPORT)
 static u64 __maybe_unused usb_dma_mask = ~(u32)0;
 
+#if IS_ENABLED(CONFIG_PHY_PXA_USB)
+struct resource pxa168_usb_phy_resources[] = {
+	[0] = {
+		.start	= PXA168_U2O_PHYBASE,
+		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device pxa168_device_usb_phy = {
+	.name		= "pxa-usb-phy",
+	.id		= -1,
+	.resource	= pxa168_usb_phy_resources,
+	.num_resources	= ARRAY_SIZE(pxa168_usb_phy_resources),
+	.dev		=  {
+		.dma_mask	= &usb_dma_mask,
+		.coherent_dma_mask = 0xffffffff,
+	}
+};
+#endif /* CONFIG_PHY_PXA_USB */
+
 #if IS_ENABLED(CONFIG_USB_MV_UDC)
 struct resource pxa168_u2o_resources[] = {
 	/* regbase */
diff --git a/arch/arm/mach-mmp/pxa910.h b/arch/arm/mach-mmp/pxa910.h
index 42009c349eae..2dfe38e4acc1 100644
--- a/arch/arm/mach-mmp/pxa910.h
+++ b/arch/arm/mach-mmp/pxa910.h
@@ -22,6 +22,7 @@ extern struct pxa_device_desc pxa910_device_pwm2;
 extern struct pxa_device_desc pxa910_device_pwm3;
 extern struct pxa_device_desc pxa910_device_pwm4;
 extern struct pxa_device_desc pxa910_device_nand;
+extern struct platform_device pxa168_device_usb_phy;
 extern struct platform_device pxa168_device_u2o;
 extern struct platform_device pxa168_device_u2ootg;
 extern struct platform_device pxa168_device_u2oehci;
-- 
2.19.1

  parent reply	other threads:[~2018-11-28 17:54 UTC|newest]

Thread overview: 78+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-28 17:53 [PATCH v4 0/20] MMP platform fixes Lubomir Rintel
2018-11-28 17:53 ` Lubomir Rintel
2018-11-28 17:53 ` [PATCH v4 01/20] dt-bindings: mrvl,mmp-timer: add clock Lubomir Rintel
2018-11-28 17:53   ` Lubomir Rintel
2018-11-30 23:10   ` Olof Johansson
2018-11-30 23:10     ` Olof Johansson
2018-11-28 17:53 ` [PATCH v4 02/20] DT: marvell,mmp2: fix the gpio interrupt cell number Lubomir Rintel
2018-11-28 17:53   ` [PATCH v4 02/20] DT: marvell, mmp2: " Lubomir Rintel
2018-11-30 23:11   ` [PATCH v4 02/20] DT: marvell,mmp2: " Olof Johansson
2018-11-30 23:11     ` Olof Johansson
2018-11-28 17:53 ` [PATCH v4 03/20] DT: marvell,mmp2: give gpio node a name Lubomir Rintel
2018-11-28 17:53   ` Lubomir Rintel
2018-11-28 17:53 ` [PATCH v4 04/20] DT: marvell,mmp2: add clock to the timer Lubomir Rintel
2018-11-28 17:53   ` Lubomir Rintel
2018-11-28 17:53 ` [PATCH v4 05/20] DT: marvell,mmp2: add MMC controllers Lubomir Rintel
2018-11-28 17:53   ` Lubomir Rintel
2018-11-28 17:53 ` [PATCH v4 06/20] DT: marvell,mmp2: fix TWSI2 Lubomir Rintel
2018-11-28 17:53   ` Lubomir Rintel
2018-11-28 17:53 ` [PATCH v4 07/20] DT: marvell,mmp2: add more TWSI controllers Lubomir Rintel
2018-11-28 17:53   ` Lubomir Rintel
2018-11-28 17:53 ` [PATCH v4 08/20] DT: marvell,mmp2: add OTG PHY Lubomir Rintel
2018-11-28 17:53   ` Lubomir Rintel
2018-11-28 17:53 ` [PATCH v4 09/20] DT: marvell,mmp2: add USB OTG host controller Lubomir Rintel
2018-11-28 17:53   ` Lubomir Rintel
2018-11-28 17:53 ` [PATCH v4 10/20] DT: marvell,mmp2: Add SSP controllers Lubomir Rintel
2018-11-28 17:53   ` Lubomir Rintel
2018-11-28 17:53 ` [PATCH v4 11/20] irqchip/mmp: only touch the PJ4 & FIQ bits on enable/disable Lubomir Rintel
2018-11-28 17:53   ` Lubomir Rintel
2018-11-28 17:53 ` [PATCH v4 12/20] irqchip/mmp: do not use of_address_to_resource() to get mux regs Lubomir Rintel
2018-11-28 17:53   ` Lubomir Rintel
2018-12-01 12:59   ` Pavel Machek
2018-12-01 12:59     ` Pavel Machek
2018-11-28 17:53 ` [PATCH v4 13/20] gpio: pxa: avoid attempting to set pin direction via pinctrl on MMP2 Lubomir Rintel
2018-11-28 17:53   ` Lubomir Rintel
2018-11-28 17:53 ` [PATCH v4 14/20] ARM: mmp/mmp2: use cpu_is_pj4() instead of cpu_is_mmp2() Lubomir Rintel
2018-11-28 17:53   ` Lubomir Rintel
2018-11-28 21:34   ` Arnd Bergmann
2018-11-28 21:34     ` Arnd Bergmann
2018-11-28 17:53 ` [PATCH v4 15/20] ARM: mmp2: initialize clocks before the timer Lubomir Rintel
2018-11-28 17:53   ` Lubomir Rintel
2018-11-30 23:59   ` Olof Johansson
2018-11-30 23:59     ` Olof Johansson
2018-11-28 17:53 ` [PATCH v4 16/20] ARM: mmp/mmp2: dt: enable the clock Lubomir Rintel
2018-11-28 17:53   ` Lubomir Rintel
2018-11-30 23:59   ` Olof Johansson
2018-11-30 23:59     ` Olof Johansson
2018-11-28 17:53 ` Lubomir Rintel [this message]
2018-11-28 17:53   ` [PATCH v4 17/20] ARM: mmp: add a pxa-usb-phy device Lubomir Rintel
2018-11-30 23:59   ` Olof Johansson
2018-11-30 23:59     ` Olof Johansson
2018-11-28 17:53 ` [PATCH v4 18/20] ARM: mmp: add an instance of pxa-usb-phy to ttc_dkb and aspenite Lubomir Rintel
2018-11-28 17:53   ` Lubomir Rintel
2018-12-01  0:00   ` Olof Johansson
2018-12-01  0:00     ` Olof Johansson
2018-11-28 17:53 ` [PATCH v4 19/20] USB: phy-mv-usb: use phy-pxa-usb Lubomir Rintel
2018-11-28 17:53   ` Lubomir Rintel
2018-11-30 23:42   ` Olof Johansson
2018-11-30 23:42     ` Olof Johansson
2018-12-01 13:10     ` Pavel Machek
2018-12-01 13:10       ` Pavel Machek
2018-12-02 19:07       ` Olof Johansson
2018-12-02 19:07         ` Olof Johansson
2018-11-28 17:53 ` [PATCH v4 20/20] USB: gadget: mv-udc: " Lubomir Rintel
2018-11-28 17:53   ` Lubomir Rintel
2018-11-30 23:42   ` Olof Johansson
2018-11-30 23:42     ` Olof Johansson
2018-11-28 21:39 ` [PATCH v4 0/20] MMP platform fixes Arnd Bergmann
2018-11-28 21:39   ` Arnd Bergmann
2018-11-28 21:44   ` Pavel Machek
2018-11-28 21:44     ` Pavel Machek
2018-11-30 23:44   ` Olof Johansson
2018-11-30 23:44     ` Olof Johansson
2018-12-02 12:07     ` Lubomir Rintel
2018-12-02 12:07       ` Lubomir Rintel
2018-12-02 22:29     ` Pavel Machek
2018-12-02 22:29       ` Pavel Machek
2018-12-02 23:24       ` James Cameron
2018-12-02 23:24         ` James Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181128175324.163202-18-lkundrak@v3.sk \
    --to=lkundrak@v3.sk \
    --cc=arm@kernel.org \
    --cc=arnd@arndb.de \
    --cc=eric.y.miao@gmail.com \
    --cc=haojian.zhuang@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=olof@lixom.net \
    --cc=pavel@ucw.cz \
    --cc=quozl@laptop.org \
    --cc=robert.jarzmik@free.fr \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.