All of lore.kernel.org
 help / color / mirror / Atom feed
From: Carlo Caione <ccaione@baylibre.com>
To: robh+dt@kernel.org, khilman@baylibre.com,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org, jbrunet@baylibre.com
Cc: Carlo Caione <ccaione@baylibre.com>
Subject: [PATCH v2] arm64: dts: meson-axg: Enable GPIO interrupt controller
Date: Sat,  1 Dec 2018 16:43:01 +0000	[thread overview]
Message-ID: <20181201164301.17274-1-ccaione@baylibre.com> (raw)

Enable the GPIO interrupt controller for the AXG SoCs.

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
---
Tested on a custom board derived from S400.

@Jerome: I know you had problems with this. I tested this on the apollo
board with the PHY IRQ and it seems to work fine. You probably want to
N/ACK this.
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index df017dbd2e57..a7d8219f7373 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1414,12 +1414,12 @@
 			};
 
 			gpio_intc: interrupt-controller@f080 {
-				compatible = "amlogic,meson-gpio-intc";
+				compatible = "amlogic,meson-axg-gpio-intc",
+					     "amlogic,meson-gpio-intc";
 				reg = <0x0 0xf080 0x0 0x10>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
-				status = "disabled";
 			};
 
 			pwm_ab: pwm@1b000 {
-- 
2.19.1

WARNING: multiple messages have this Message-ID (diff)
From: Carlo Caione <ccaione@baylibre.com>
To: robh+dt@kernel.org, khilman@baylibre.com,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org, jbrunet@baylibre.com
Cc: Carlo Caione <ccaione@baylibre.com>
Subject: [PATCH v2] arm64: dts: meson-axg: Enable GPIO interrupt controller
Date: Sat,  1 Dec 2018 16:43:01 +0000	[thread overview]
Message-ID: <20181201164301.17274-1-ccaione@baylibre.com> (raw)

Enable the GPIO interrupt controller for the AXG SoCs.

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
---
Tested on a custom board derived from S400.

@Jerome: I know you had problems with this. I tested this on the apollo
board with the PHY IRQ and it seems to work fine. You probably want to
N/ACK this.
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index df017dbd2e57..a7d8219f7373 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1414,12 +1414,12 @@
 			};
 
 			gpio_intc: interrupt-controller@f080 {
-				compatible = "amlogic,meson-gpio-intc";
+				compatible = "amlogic,meson-axg-gpio-intc",
+					     "amlogic,meson-gpio-intc";
 				reg = <0x0 0xf080 0x0 0x10>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
-				status = "disabled";
 			};
 
 			pwm_ab: pwm@1b000 {
-- 
2.19.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Carlo Caione <ccaione@baylibre.com>
To: robh+dt@kernel.org, khilman@baylibre.com,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org, jbrunet@baylibre.com
Cc: Carlo Caione <ccaione@baylibre.com>
Subject: [PATCH v2] arm64: dts: meson-axg: Enable GPIO interrupt controller
Date: Sat,  1 Dec 2018 16:43:01 +0000	[thread overview]
Message-ID: <20181201164301.17274-1-ccaione@baylibre.com> (raw)

Enable the GPIO interrupt controller for the AXG SoCs.

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
---
Tested on a custom board derived from S400.

@Jerome: I know you had problems with this. I tested this on the apollo
board with the PHY IRQ and it seems to work fine. You probably want to
N/ACK this.
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index df017dbd2e57..a7d8219f7373 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1414,12 +1414,12 @@
 			};
 
 			gpio_intc: interrupt-controller@f080 {
-				compatible = "amlogic,meson-gpio-intc";
+				compatible = "amlogic,meson-axg-gpio-intc",
+					     "amlogic,meson-gpio-intc";
 				reg = <0x0 0xf080 0x0 0x10>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
-				status = "disabled";
 			};
 
 			pwm_ab: pwm@1b000 {
-- 
2.19.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

             reply	other threads:[~2018-12-01 16:43 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-01 16:43 Carlo Caione [this message]
2018-12-01 16:43 ` [PATCH v2] arm64: dts: meson-axg: Enable GPIO interrupt controller Carlo Caione
2018-12-01 16:43 ` Carlo Caione
2018-12-05 14:50 ` Jerome Brunet
2018-12-05 14:50   ` Jerome Brunet
2018-12-05 14:50   ` Jerome Brunet
2018-12-05 17:09   ` Kevin Hilman
2018-12-05 17:09     ` Kevin Hilman
2018-12-05 17:09     ` Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181201164301.17274-1-ccaione@baylibre.com \
    --to=ccaione@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.