From: Aaro Koskinen <aaro.koskinen@iki.fi> To: Tony Lindgren <tony@atomide.com>, linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Aaro Koskinen <aaro.koskinen@iki.fi> Subject: [PATCH] ARM: OMAP1: fix USB configuration for device-only setups Date: Tue, 4 Dec 2018 19:57:42 +0200 [thread overview] Message-ID: <20181204175742.2634-1-aaro.koskinen@iki.fi> (raw) Currently we do USB configuration only if the host mode (CONFIG_USB) is enabled. But it should be done also in the case of device-only setups, so change the condition to CONFIG_USB_SUPPORT. This allows to use omap_udc on Palm Tungsten E. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> --- arch/arm/mach-omap1/Makefile | 2 +- arch/arm/mach-omap1/include/mach/usb.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index e8ccf51c6f29..ec0235899de2 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -25,7 +25,7 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y) led-y := leds.o -usb-fs-$(CONFIG_USB) := usb.o +usb-fs-$(CONFIG_USB_SUPPORT) := usb.o obj-y += $(usb-fs-m) $(usb-fs-y) # Specific board support diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h index 77867778d4ec..5429d86c7190 100644 --- a/arch/arm/mach-omap1/include/mach/usb.h +++ b/arch/arm/mach-omap1/include/mach/usb.h @@ -11,7 +11,7 @@ #include <linux/platform_data/usb-omap1.h> -#if IS_ENABLED(CONFIG_USB) +#if IS_ENABLED(CONFIG_USB_SUPPORT) void omap1_usb_init(struct omap_usb_config *pdata); #else static inline void omap1_usb_init(struct omap_usb_config *pdata) -- 2.17.0
WARNING: multiple messages have this Message-ID (diff)
From: Aaro Koskinen <aaro.koskinen@iki.fi> To: Tony Lindgren <tony@atomide.com>, linux-omap@vger.kernel.org Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Aaro Koskinen <aaro.koskinen@iki.fi> Subject: [PATCH] ARM: OMAP1: fix USB configuration for device-only setups Date: Tue, 4 Dec 2018 19:57:42 +0200 [thread overview] Message-ID: <20181204175742.2634-1-aaro.koskinen@iki.fi> (raw) Currently we do USB configuration only if the host mode (CONFIG_USB) is enabled. But it should be done also in the case of device-only setups, so change the condition to CONFIG_USB_SUPPORT. This allows to use omap_udc on Palm Tungsten E. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> --- arch/arm/mach-omap1/Makefile | 2 +- arch/arm/mach-omap1/include/mach/usb.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index e8ccf51c6f29..ec0235899de2 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -25,7 +25,7 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y) led-y := leds.o -usb-fs-$(CONFIG_USB) := usb.o +usb-fs-$(CONFIG_USB_SUPPORT) := usb.o obj-y += $(usb-fs-m) $(usb-fs-y) # Specific board support diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h index 77867778d4ec..5429d86c7190 100644 --- a/arch/arm/mach-omap1/include/mach/usb.h +++ b/arch/arm/mach-omap1/include/mach/usb.h @@ -11,7 +11,7 @@ #include <linux/platform_data/usb-omap1.h> -#if IS_ENABLED(CONFIG_USB) +#if IS_ENABLED(CONFIG_USB_SUPPORT) void omap1_usb_init(struct omap_usb_config *pdata); #else static inline void omap1_usb_init(struct omap_usb_config *pdata) -- 2.17.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2018-12-04 17:57 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-12-04 17:57 Aaro Koskinen [this message] 2018-12-04 17:57 ` [PATCH] ARM: OMAP1: fix USB configuration for device-only setups Aaro Koskinen 2018-12-11 16:17 ` Tony Lindgren 2018-12-11 16:17 ` Tony Lindgren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20181204175742.2634-1-aaro.koskinen@iki.fi \ --to=aaro.koskinen@iki.fi \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.