From: Jerome Brunet <jbrunet@baylibre.com>
To: Mark Brown <broonie@kernel.org>,
Kevin Hilman <khilman@baylibre.com>,
Carlo Caione <carlo@caione.org>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org
Subject: [PATCH 2/4] ASoC: meson: add axg spdif input DT binding documentation
Date: Tue, 11 Dec 2018 14:47:11 +0100 [thread overview]
Message-ID: <20181211134713.4908-3-jbrunet@baylibre.com> (raw)
In-Reply-To: <20181211134713.4908-1-jbrunet@baylibre.com>
Add the DT binding documentation for axg's SPDIF input.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/sound/amlogic,axg-spdifin.txt | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
new file mode 100644
index 000000000000..2e6cb7d9b202
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
@@ -0,0 +1,22 @@
+* Amlogic Audio SPDIF Input
+
+Required properties:
+- compatible: 'amlogic,axg-spdifin'
+- interrupts: interrupt specifier for the spdif input.
+- clocks: list of clock phandle, one for each entry clock-names.
+- clock-names: should contain the following:
+ * "pclk" : peripheral clock.
+ * "refclk" : spdif input reference clock
+- #sound-dai-cells: must be 0.
+
+Example on the A113 SoC:
+
+spdifin: audio-controller@400 {
+ compatible = "amlogic,axg-spdifin";
+ reg = <0x0 0x400 0x0 0x30>;
+ #sound-dai-cells = <0>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+ <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+ clock-names = "pclk", "refclk";
+};
--
2.19.2
WARNING: multiple messages have this Message-ID (diff)
From: Jerome Brunet <jbrunet@baylibre.com>
To: Mark Brown <broonie@kernel.org>,
Kevin Hilman <khilman@baylibre.com>,
Carlo Caione <carlo@caione.org>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH 2/4] ASoC: meson: add axg spdif input DT binding documentation
Date: Tue, 11 Dec 2018 14:47:11 +0100 [thread overview]
Message-ID: <20181211134713.4908-3-jbrunet@baylibre.com> (raw)
In-Reply-To: <20181211134713.4908-1-jbrunet@baylibre.com>
Add the DT binding documentation for axg's SPDIF input.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/sound/amlogic,axg-spdifin.txt | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
new file mode 100644
index 000000000000..2e6cb7d9b202
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
@@ -0,0 +1,22 @@
+* Amlogic Audio SPDIF Input
+
+Required properties:
+- compatible: 'amlogic,axg-spdifin'
+- interrupts: interrupt specifier for the spdif input.
+- clocks: list of clock phandle, one for each entry clock-names.
+- clock-names: should contain the following:
+ * "pclk" : peripheral clock.
+ * "refclk" : spdif input reference clock
+- #sound-dai-cells: must be 0.
+
+Example on the A113 SoC:
+
+spdifin: audio-controller@400 {
+ compatible = "amlogic,axg-spdifin";
+ reg = <0x0 0x400 0x0 0x30>;
+ #sound-dai-cells = <0>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+ <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+ clock-names = "pclk", "refclk";
+};
--
2.19.2
WARNING: multiple messages have this Message-ID (diff)
From: Jerome Brunet <jbrunet@baylibre.com>
To: Mark Brown <broonie@kernel.org>,
Kevin Hilman <khilman@baylibre.com>,
Carlo Caione <carlo@caione.org>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH 2/4] ASoC: meson: add axg spdif input DT binding documentation
Date: Tue, 11 Dec 2018 14:47:11 +0100 [thread overview]
Message-ID: <20181211134713.4908-3-jbrunet@baylibre.com> (raw)
In-Reply-To: <20181211134713.4908-1-jbrunet@baylibre.com>
Add the DT binding documentation for axg's SPDIF input.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/sound/amlogic,axg-spdifin.txt | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
new file mode 100644
index 000000000000..2e6cb7d9b202
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
@@ -0,0 +1,22 @@
+* Amlogic Audio SPDIF Input
+
+Required properties:
+- compatible: 'amlogic,axg-spdifin'
+- interrupts: interrupt specifier for the spdif input.
+- clocks: list of clock phandle, one for each entry clock-names.
+- clock-names: should contain the following:
+ * "pclk" : peripheral clock.
+ * "refclk" : spdif input reference clock
+- #sound-dai-cells: must be 0.
+
+Example on the A113 SoC:
+
+spdifin: audio-controller@400 {
+ compatible = "amlogic,axg-spdifin";
+ reg = <0x0 0x400 0x0 0x30>;
+ #sound-dai-cells = <0>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+ <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+ clock-names = "pclk", "refclk";
+};
--
2.19.2
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2018-12-11 13:47 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-11 13:47 [PATCH 0/4] ASoC: meson: add axg spdif input support Jerome Brunet
2018-12-11 13:47 ` Jerome Brunet
2018-12-11 13:47 ` [PATCH 1/4] ASoC: meson: axg-toddr: add support for spdifin backend Jerome Brunet
2018-12-11 13:47 ` Jerome Brunet
2018-12-13 12:08 ` Applied "ASoC: meson: axg-toddr: add support for spdifin backend" to the asoc tree Mark Brown
2018-12-13 12:08 ` Mark Brown
2018-12-13 12:08 ` Mark Brown
2018-12-11 13:47 ` Jerome Brunet [this message]
2018-12-11 13:47 ` [PATCH 2/4] ASoC: meson: add axg spdif input DT binding documentation Jerome Brunet
2018-12-11 13:47 ` Jerome Brunet
2018-12-13 12:08 ` Applied "ASoC: meson: add axg spdif input DT binding documentation" to the asoc tree Mark Brown
2018-12-13 12:08 ` Mark Brown
2018-12-13 12:08 ` Mark Brown
2018-12-11 13:47 ` [PATCH 3/4] ASoC: meson: add axg spdif input Jerome Brunet
2018-12-11 13:47 ` Jerome Brunet
2018-12-13 12:08 ` Applied "ASoC: meson: add axg spdif input" to the asoc tree Mark Brown
2018-12-13 12:08 ` Mark Brown
2018-12-13 12:08 ` Mark Brown
2018-12-11 13:47 ` [PATCH 4/4] MAINTAINERS: Add Amlogic sound drivers entry Jerome Brunet
2018-12-11 13:47 ` Jerome Brunet
2018-12-13 12:08 ` Applied "MAINTAINERS: Add Amlogic sound drivers entry" to the asoc tree Mark Brown
2018-12-13 12:08 ` Mark Brown
2018-12-13 12:08 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181211134713.4908-3-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=carlo@caione.org \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.