All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sibi Sankar <sibis@codeaurora.org>
To: bjorn.andersson@linaro.org, david.brown@linaro.org,
	robh+dt@kernel.org, mark.rutland@arm.com, andy.gross@linaro.org
Cc: briannorris@chromium.org, akdwived@codeaurora.org,
	clew@codeaurora.org, linux-kernel@vger.kernel.org,
	linux-arm-msm-owner@vger.kernel.org, ohad@wizery.com,
	linux-remoteproc@vger.kernel.org, devicetree@vger.kernel.org,
	Sibi Sankar <sibis@codeaurora.org>
Subject: [PATCH 2/2] remoteproc: qcom: q6v5-mss: Add support for parsing fw dt bindings
Date: Wed, 12 Dec 2018 18:14:56 +0530	[thread overview]
Message-ID: <20181212124456.3164-3-sibis@codeaurora.org> (raw)
In-Reply-To: <20181212124456.3164-1-sibis@codeaurora.org>

Add support for parsing "qcom,firmware" dt bindings which specifies
the relative paths of mba and modem metadata as a list of strings.
Fallback to the default paths for mba/modem on -EINVAL.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
 drivers/remoteproc/qcom_q6v5_mss.c | 49 +++++++++++++++++++++++++-----
 1 file changed, 41 insertions(+), 8 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 01be7314e176..c4e7700aee0f 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
@@ -30,6 +31,7 @@
 #include <linux/remoteproc.h>
 #include <linux/reset.h>
 #include <linux/soc/qcom/mdt_loader.h>
+#include <linux/string.h>
 #include <linux/iopoll.h>
 
 #include "remoteproc_internal.h"
@@ -188,6 +190,7 @@ struct q6v5 {
 	bool has_alt_reset;
 	int mpss_perm;
 	int mba_perm;
+	const char *hexagon_mdt_image;
 	int version;
 };
 
@@ -860,17 +863,29 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 	phys_addr_t min_addr = PHYS_ADDR_MAX;
 	phys_addr_t max_addr = 0;
 	bool relocate = false;
-	char seg_name[10];
+	char seg_name[35];
+	char *fw_prefix;
+	char *tmp;
 	ssize_t offset;
 	size_t size = 0;
 	void *ptr;
 	int ret;
 	int i;
 
-	ret = request_firmware(&fw, "modem.mdt", qproc->dev);
+	fw_prefix = kstrdup(qproc->hexagon_mdt_image, GFP_KERNEL);
+	if (!fw_prefix)
+		return -ENOMEM;
+
+	/* strip out the fw extn */
+	tmp = strrchr(fw_prefix, '.');
+	if (tmp)
+		*tmp = '\0';
+
+	ret = request_firmware(&fw, qproc->hexagon_mdt_image, qproc->dev);
 	if (ret < 0) {
-		dev_err(qproc->dev, "unable to load modem.mdt\n");
-		return ret;
+		dev_err(qproc->dev, "unable to load %s\n",
+			qproc->hexagon_mdt_image);
+		goto release_fw_prefix;
 	}
 
 	/* Initialize the RMB validator */
@@ -918,7 +933,8 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 		ptr = qproc->mpss_region + offset;
 
 		if (phdr->p_filesz) {
-			snprintf(seg_name, sizeof(seg_name), "modem.b%02d", i);
+			snprintf(seg_name, sizeof(seg_name), "%s.b%02d",
+				 fw_prefix, i);
 			ret = request_firmware(&seg_fw, seg_name, qproc->dev);
 			if (ret) {
 				dev_err(qproc->dev, "failed to load %s\n", seg_name);
@@ -960,6 +976,8 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 
 release_firmware:
 	release_firmware(fw);
+release_fw_prefix:
+	kfree(fw_prefix);
 
 	return ret < 0 ? ret : 0;
 }
@@ -1075,9 +1093,10 @@ static int qcom_q6v5_register_dump_segments(struct rproc *rproc,
 	unsigned long i;
 	int ret;
 
-	ret = request_firmware(&fw, "modem.mdt", qproc->dev);
+	ret = request_firmware(&fw, qproc->hexagon_mdt_image, qproc->dev);
 	if (ret < 0) {
-		dev_err(qproc->dev, "unable to load modem.mdt\n");
+		dev_err(qproc->dev, "unable to load %s\n",
+			qproc->hexagon_mdt_image);
 		return ret;
 	}
 
@@ -1253,6 +1272,8 @@ static int q6v5_probe(struct platform_device *pdev)
 	const struct rproc_hexagon_res *desc;
 	struct q6v5 *qproc;
 	struct rproc *rproc;
+	const char *mba_image;
+	const char *fw_name[2];
 	int ret;
 
 	desc = of_device_get_match_data(&pdev->dev);
@@ -1262,8 +1283,19 @@ static int q6v5_probe(struct platform_device *pdev)
 	if (desc->need_mem_protection && !qcom_scm_is_available())
 		return -EPROBE_DEFER;
 
+	ret = of_property_count_strings(pdev->dev.of_node, "qcom,firmware");
+	if (ret != -EINVAL && ret != 2)
+		return -EINVAL;
+
+	ret = of_property_read_string_array(pdev->dev.of_node, "qcom,firmware",
+					    fw_name, 2);
+	if (ret != -EINVAL && ret != 2)
+		return -EINVAL;
+
+	mba_image = (ret != 2) ? desc->hexagon_mba_image : fw_name[0];
+
 	rproc = rproc_alloc(&pdev->dev, pdev->name, &q6v5_ops,
-			    desc->hexagon_mba_image, sizeof(*qproc));
+			    mba_image, sizeof(*qproc));
 	if (!rproc) {
 		dev_err(&pdev->dev, "failed to allocate rproc\n");
 		return -ENOMEM;
@@ -1272,6 +1304,7 @@ static int q6v5_probe(struct platform_device *pdev)
 	qproc = (struct q6v5 *)rproc->priv;
 	qproc->dev = &pdev->dev;
 	qproc->rproc = rproc;
+	qproc->hexagon_mdt_image = (ret != 2) ? "modem.mdt" : fw_name[1];
 	platform_set_drvdata(pdev, qproc);
 
 	ret = q6v5_init_mem(qproc, pdev);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

      parent reply	other threads:[~2018-12-12 12:44 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-12 12:44 [PATCH 0/2] Add firmware bindings for Q6V5 MSS Sibi Sankar
2018-12-12 12:44 ` [PATCH 1/2] dt-bindings: remoteproc: qcom: " Sibi Sankar
2018-12-20 20:10   ` Rob Herring
2018-12-28  4:47     ` Sibi Sankar
2018-12-12 12:44 ` Sibi Sankar [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181212124456.3164-3-sibis@codeaurora.org \
    --to=sibis@codeaurora.org \
    --cc=akdwived@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=briannorris@chromium.org \
    --cc=clew@codeaurora.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm-owner@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=ohad@wizery.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.