All of lore.kernel.org
 help / color / mirror / Atom feed
From: sakari.ailus@iki.fi
To: linux-media@vger.kernel.org
Subject: [GIT PULL v3 for 4.21] META_OUTPUT buffer type and the ipu3 staging driver
Date: Thu, 13 Dec 2018 13:19:08 +0200	[thread overview]
Message-ID: <20181213111908.kmdnv4hmm6xcah7f@valkosipuli.retiisi.org.uk> (raw)

Hi Mauro,

Here's the ipu3 staging driver plus the META_OUTPUT buffer type needed to
pass the parameters for the device. If you think this there's still time to
get this to 4.21, then please pull. The non-staging patches have been
around for more than half a year and they're relatively simple.

Note: DO NOT WORRY about the documentation build warnings, they'll be
adderessed by commit fdf8298f7ff167e4e7522465a3c6e6b908cdb2af from the
documentation tree (already in linux-next).

Since the v1 pull request, this contains the content of the v9
patchset (since v8):

- Addressed most of Laurent's comments on the driver documentation. Some
  have been postponed and added to TODO.

- Added a MAINTAINERS entry.

- Removed uAPI definitions (formats etc.) added by the patches originally
  not intended to be merged (documentation outside the staging tree).

- Added a patch to fix a few compiler warnings (false positives) plus
  fixed the firmware location.

- checkpatch.pl warnings remain; those need to be fixed as well.

since v2 pull request:

- Use correct tag.

Please pull.


The following changes since commit e159b6074c82fe31b79aad672e02fa204dbbc6d8:

  media: vimc: fix start stream when link is disabled (2018-12-07 13:08:41 -0500)

are available in the git repository at:

  ssh://linuxtv.org/git/sailus/media_tree.git tags/ipu3-v8-4.20-3-sign

for you to fetch changes up to 48acf4640e698334bfd9dc41a94b17b568a97b31:

  staging/ipu3-imgu: Add MAINTAINERS entry (2018-12-13 13:04:00 +0200)

----------------------------------------------------------------
imgu staging driver v9

----------------------------------------------------------------
Cao,Bing Bu (1):
      media: staging/intel-ipu3: Add dual pipe support

Rajmohan Mani (1):
      doc-rst: Add Intel IPU3 documentation

Sakari Ailus (6):
      v4l: Add support for V4L2_BUF_TYPE_META_OUTPUT
      docs-rst: v4l: Document V4L2_BUF_TYPE_META_OUTPUT interface
      ipu3-imgu: Fix compiler warnings
      ipu3-imgu: Fix firmware binary location
      staging/ipu3-imgu: Address documentation comments
      staging/ipu3-imgu: Add MAINTAINERS entry

Tomasz Figa (2):
      media: staging/intel-ipu3: mmu: Implement driver
      media: staging/intel-ipu3: Implement DMA mapping functions

Yong Zhi (12):
      media: staging/intel-ipu3: abi: Add register definitions and enum
      media: staging/intel-ipu3: abi: Add structs
      media: staging/intel-ipu3: css: Add dma buff pool utility functions
      media: staging/intel-ipu3: css: Add support for firmware management
      media: staging/intel-ipu3: css: Add static settings for image pipeline
      media: staging/intel-ipu3: css: Compute and program ccs
      media: staging/intel-ipu3: css: Initialize css hardware
      media: staging/intel-ipu3: Add css pipeline programming
      media: staging/intel-ipu3: Add v4l2 driver based on media framework
      media: staging/intel-ipu3: Add imgu top level pci device driver
      media: staging/intel-ipu3: Add Intel IPU3 meta data uAPI
      media: v4l: Add Intel IPU3 meta buffer formats

 Documentation/media/uapi/v4l/buffer.rst            |    3 +
 Documentation/media/uapi/v4l/dev-meta.rst          |   33 +-
 Documentation/media/uapi/v4l/meta-formats.rst      |    1 +
 .../media/uapi/v4l/pixfmt-meta-intel-ipu3.rst      |  178 +
 Documentation/media/uapi/v4l/vidioc-querycap.rst   |    3 +
 Documentation/media/v4l-drivers/index.rst          |    1 +
 Documentation/media/v4l-drivers/ipu3.rst           |  369 +
 Documentation/media/videodev2.h.rst.exceptions     |    2 +
 MAINTAINERS                                        |    8 +
 drivers/media/common/videobuf2/videobuf2-v4l2.c    |    1 +
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c      |    2 +
 drivers/media/v4l2-core/v4l2-dev.c                 |   12 +-
 drivers/media/v4l2-core/v4l2-ioctl.c               |   23 +
 drivers/staging/media/Kconfig                      |    2 +
 drivers/staging/media/Makefile                     |    1 +
 drivers/staging/media/ipu3/Kconfig                 |   14 +
 drivers/staging/media/ipu3/Makefile                |   11 +
 drivers/staging/media/ipu3/TODO                    |   34 +
 drivers/staging/media/ipu3/include/intel-ipu3.h    | 2785 ++++++
 drivers/staging/media/ipu3/ipu3-abi.h              | 2011 ++++
 drivers/staging/media/ipu3/ipu3-css-fw.c           |  265 +
 drivers/staging/media/ipu3/ipu3-css-fw.h           |  188 +
 drivers/staging/media/ipu3/ipu3-css-params.c       | 2943 ++++++
 drivers/staging/media/ipu3/ipu3-css-params.h       |   28 +
 drivers/staging/media/ipu3/ipu3-css-pool.c         |  100 +
 drivers/staging/media/ipu3/ipu3-css-pool.h         |   55 +
 drivers/staging/media/ipu3/ipu3-css.c              | 2391 +++++
 drivers/staging/media/ipu3/ipu3-css.h              |  213 +
 drivers/staging/media/ipu3/ipu3-dmamap.c           |  270 +
 drivers/staging/media/ipu3/ipu3-dmamap.h           |   22 +
 drivers/staging/media/ipu3/ipu3-mmu.c              |  561 ++
 drivers/staging/media/ipu3/ipu3-mmu.h              |   35 +
 drivers/staging/media/ipu3/ipu3-tables.c           | 9609 ++++++++++++++++++++
 drivers/staging/media/ipu3/ipu3-tables.h           |   66 +
 drivers/staging/media/ipu3/ipu3-v4l2.c             | 1419 +++
 drivers/staging/media/ipu3/ipu3.c                  |  830 ++
 drivers/staging/media/ipu3/ipu3.h                  |  168 +
 include/media/v4l2-ioctl.h                         |   17 +
 include/uapi/linux/videodev2.h                     |    2 +
 39 files changed, 24659 insertions(+), 17 deletions(-)
 create mode 100644 Documentation/media/uapi/v4l/pixfmt-meta-intel-ipu3.rst
 create mode 100644 Documentation/media/v4l-drivers/ipu3.rst
 create mode 100644 drivers/staging/media/ipu3/Kconfig
 create mode 100644 drivers/staging/media/ipu3/Makefile
 create mode 100644 drivers/staging/media/ipu3/TODO
 create mode 100644 drivers/staging/media/ipu3/include/intel-ipu3.h
 create mode 100644 drivers/staging/media/ipu3/ipu3-abi.h
 create mode 100644 drivers/staging/media/ipu3/ipu3-css-fw.c
 create mode 100644 drivers/staging/media/ipu3/ipu3-css-fw.h
 create mode 100644 drivers/staging/media/ipu3/ipu3-css-params.c
 create mode 100644 drivers/staging/media/ipu3/ipu3-css-params.h
 create mode 100644 drivers/staging/media/ipu3/ipu3-css-pool.c
 create mode 100644 drivers/staging/media/ipu3/ipu3-css-pool.h
 create mode 100644 drivers/staging/media/ipu3/ipu3-css.c
 create mode 100644 drivers/staging/media/ipu3/ipu3-css.h
 create mode 100644 drivers/staging/media/ipu3/ipu3-dmamap.c
 create mode 100644 drivers/staging/media/ipu3/ipu3-dmamap.h
 create mode 100644 drivers/staging/media/ipu3/ipu3-mmu.c
 create mode 100644 drivers/staging/media/ipu3/ipu3-mmu.h
 create mode 100644 drivers/staging/media/ipu3/ipu3-tables.c
 create mode 100644 drivers/staging/media/ipu3/ipu3-tables.h
 create mode 100644 drivers/staging/media/ipu3/ipu3-v4l2.c
 create mode 100644 drivers/staging/media/ipu3/ipu3.c
 create mode 100644 drivers/staging/media/ipu3/ipu3.h

-- 
Sakari Ailus

                 reply	other threads:[~2018-12-13 11:19 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181213111908.kmdnv4hmm6xcah7f@valkosipuli.retiisi.org.uk \
    --to=sakari.ailus@iki.fi \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.