From: Peter Ujfalusi <peter.ujfalusi@ti.com> To: tony@atomide.com, linux@armlinux.org.uk, nsekhar@ti.com Cc: devicetree@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, bcousson@baylibre.com Subject: [PATCH] ARM: dts: da850-lcdk: Correct the audio codec regulators Date: Wed, 19 Dec 2018 12:13:05 +0200 [thread overview] Message-ID: <20181219101305.20832-1-peter.ujfalusi@ti.com> (raw) Add the board level fixed regulators for 3.3V and 1.8V which is used to power - among other things - the tlv320aic3106 codec. Apart from removing the following warning during boot: tlv320aic3x-codec 0-0018: Invalid supply voltage(s) AVDD: -22, DVDD: -22 With the correct voltages the driver can select correct OCMV value to reduce pop noise. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- arch/arm/boot/dts/da850-lcdk.dts | 36 ++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index 0177e3ed20fe..c196e37606c4 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -39,6 +39,36 @@ }; }; + vcc_5vd: fixedregulator-vcc_5vd { + compatible = "regulator-fixed"; + regulator-name = "vcc_5vd"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + vcc_3v3d: fixedregulator-vcc_3v3d { + /* TPS650250 - VDCDC1 */ + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3d"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_5vd>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_1v8d: fixedregulator-vcc_1v8d { + /* TPS650250 - VDCDC2 */ + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8d"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_5vd>; + regulator-always-on; + regulator-boot-on; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "DA850/OMAP-L138 LCDK"; @@ -221,6 +251,12 @@ compatible = "ti,tlv320aic3106"; reg = <0x18>; status = "okay"; + + /* Regulators */ + IOVDD-supply = <&vcc_3v3d>; + AVDD-supply = <&vcc_3v3d>; + DRVDD-supply = <&vcc_3v3d>; + DVDD-supply = <&vcc_1v8d>; }; }; -- Peter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
WARNING: multiple messages have this Message-ID (diff)
From: Peter Ujfalusi <peter.ujfalusi@ti.com> To: <tony@atomide.com>, <linux@armlinux.org.uk>, <nsekhar@ti.com> Cc: devicetree@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, bcousson@baylibre.com Subject: [PATCH] ARM: dts: da850-lcdk: Correct the audio codec regulators Date: Wed, 19 Dec 2018 12:13:05 +0200 [thread overview] Message-ID: <20181219101305.20832-1-peter.ujfalusi@ti.com> (raw) Add the board level fixed regulators for 3.3V and 1.8V which is used to power - among other things - the tlv320aic3106 codec. Apart from removing the following warning during boot: tlv320aic3x-codec 0-0018: Invalid supply voltage(s) AVDD: -22, DVDD: -22 With the correct voltages the driver can select correct OCMV value to reduce pop noise. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- arch/arm/boot/dts/da850-lcdk.dts | 36 ++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index 0177e3ed20fe..c196e37606c4 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -39,6 +39,36 @@ }; }; + vcc_5vd: fixedregulator-vcc_5vd { + compatible = "regulator-fixed"; + regulator-name = "vcc_5vd"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + vcc_3v3d: fixedregulator-vcc_3v3d { + /* TPS650250 - VDCDC1 */ + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3d"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_5vd>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_1v8d: fixedregulator-vcc_1v8d { + /* TPS650250 - VDCDC2 */ + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8d"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_5vd>; + regulator-always-on; + regulator-boot-on; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "DA850/OMAP-L138 LCDK"; @@ -221,6 +251,12 @@ compatible = "ti,tlv320aic3106"; reg = <0x18>; status = "okay"; + + /* Regulators */ + IOVDD-supply = <&vcc_3v3d>; + AVDD-supply = <&vcc_3v3d>; + DRVDD-supply = <&vcc_3v3d>; + DVDD-supply = <&vcc_1v8d>; }; }; -- Peter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2018-12-19 10:13 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-12-19 10:13 Peter Ujfalusi [this message] 2018-12-19 10:13 ` [PATCH] ARM: dts: da850-lcdk: Correct the audio codec regulators Peter Ujfalusi 2018-12-19 11:37 ` Peter Ujfalusi 2018-12-19 11:37 ` Peter Ujfalusi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20181219101305.20832-1-peter.ujfalusi@ti.com \ --to=peter.ujfalusi@ti.com \ --cc=bcousson@baylibre.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=nsekhar@ti.com \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.