From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: p.zabel@pengutronix.de
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
Fabio Estevam <fabio.estevam@nxp.com>,
cphealy@gmail.com, l.stach@pengutronix.de,
Leonard Crestez <leonard.crestez@nxp.com>,
"A.s. Dong" <aisheng.dong@nxp.com>,
Richard Zhu <hongxing.zhu@nxp.com>, Rob Herring <robh@kernel.org>,
devicetree@vger.kernel.org, linux-imx@nxp.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v4 3/3] reset: imx7: Add support for i.MX8MQ IP block variant
Date: Wed, 19 Dec 2018 17:07:00 -0800 [thread overview]
Message-ID: <20181220010700.8598-4-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20181220010700.8598-1-andrew.smirnov@gmail.com>
Add bits and pieces needed to support IP block variant found on
i.MX8MQ SoCs.
Cc: p.zabel@pengutronix.de
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: cphealy@gmail.com
Cc: l.stach@pengutronix.de
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "A.s. Dong" <aisheng.dong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-imx@nxp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/reset/Kconfig | 4 +-
drivers/reset/reset-imx7.c | 106 +++++++++++++++++++++++++++++++++++++
2 files changed, 108 insertions(+), 2 deletions(-)
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index c21da9fe51ec..add84b523be1 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -48,9 +48,9 @@ config RESET_HSDK
This enables the reset controller driver for HSDK board.
config RESET_IMX7
- bool "i.MX7 Reset Driver" if COMPILE_TEST
+ bool "i.MX7/8 Reset Driver" if COMPILE_TEST
depends on HAS_IOMEM
- default SOC_IMX7D
+ default SOC_IMX7D || (ARM64 && ARCH_MXC)
select MFD_SYSCON
help
This enables the reset controller driver for i.MX7 SoCs.
diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c
index 3a36d5863891..bb826935db6d 100644
--- a/drivers/reset/reset-imx7.c
+++ b/drivers/reset/reset-imx7.c
@@ -22,6 +22,7 @@
#include <linux/reset-controller.h>
#include <linux/regmap.h>
#include <dt-bindings/reset/imx7-reset.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
struct imx7_src_signal {
unsigned int offset, bit;
@@ -113,6 +114,110 @@ static const struct imx7_src_variant variant_imx7 = {
.prepare = imx7_src_prepare,
};
+enum imx8mq_src_registers {
+ SRC_A53RCR0 = 0x0004,
+ SRC_HDMI_RCR = 0x0030,
+ SRC_DISP_RCR = 0x0034,
+ SRC_GPU_RCR = 0x0040,
+ SRC_VPU_RCR = 0x0044,
+ SRC_PCIE2_RCR = 0x0048,
+ SRC_MIPIPHY1_RCR = 0x004c,
+ SRC_MIPIPHY2_RCR = 0x0050,
+ SRC_DDRC2_RCR = 0x1004,
+};
+
+static const struct imx7_src_signal imx8mq_src_signals[IMX8MQ_RESET_NUM] = {
+ [IMX8MQ_RESET_A53_CORE_POR_RESET0] = { SRC_A53RCR0, BIT(0) },
+ [IMX8MQ_RESET_A53_CORE_POR_RESET1] = { SRC_A53RCR0, BIT(1) },
+ [IMX8MQ_RESET_A53_CORE_POR_RESET2] = { SRC_A53RCR0, BIT(2) },
+ [IMX8MQ_RESET_A53_CORE_POR_RESET3] = { SRC_A53RCR0, BIT(3) },
+ [IMX8MQ_RESET_A53_CORE_RESET0] = { SRC_A53RCR0, BIT(4) },
+ [IMX8MQ_RESET_A53_CORE_RESET1] = { SRC_A53RCR0, BIT(5) },
+ [IMX8MQ_RESET_A53_CORE_RESET2] = { SRC_A53RCR0, BIT(6) },
+ [IMX8MQ_RESET_A53_CORE_RESET3] = { SRC_A53RCR0, BIT(7) },
+ [IMX8MQ_RESET_A53_DBG_RESET0] = { SRC_A53RCR0, BIT(8) },
+ [IMX8MQ_RESET_A53_DBG_RESET1] = { SRC_A53RCR0, BIT(9) },
+ [IMX8MQ_RESET_A53_DBG_RESET2] = { SRC_A53RCR0, BIT(10) },
+ [IMX8MQ_RESET_A53_DBG_RESET3] = { SRC_A53RCR0, BIT(11) },
+ [IMX8MQ_RESET_A53_ETM_RESET0] = { SRC_A53RCR0, BIT(12) },
+ [IMX8MQ_RESET_A53_ETM_RESET1] = { SRC_A53RCR0, BIT(13) },
+ [IMX8MQ_RESET_A53_ETM_RESET2] = { SRC_A53RCR0, BIT(14) },
+ [IMX8MQ_RESET_A53_ETM_RESET3] = { SRC_A53RCR0, BIT(15) },
+ [IMX8MQ_RESET_A53_SOC_DBG_RESET] = { SRC_A53RCR0, BIT(20) },
+ [IMX8MQ_RESET_A53_L2RESET] = { SRC_A53RCR0, BIT(21) },
+ [IMX8MQ_RESET_SW_NON_SCLR_M4C_RST] = { SRC_M4RCR, BIT(0) },
+ [IMX8MQ_RESET_OTG1_PHY_RESET] = { SRC_USBOPHY1_RCR, BIT(0) },
+ [IMX8MQ_RESET_OTG2_PHY_RESET] = { SRC_USBOPHY2_RCR, BIT(0) },
+ [IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N] = { SRC_MIPIPHY_RCR, BIT(1) },
+ [IMX8MQ_RESET_MIPI_DSI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(2) },
+ [IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(3) },
+ [IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N] = { SRC_MIPIPHY_RCR, BIT(4) },
+ [IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N] = { SRC_MIPIPHY_RCR, BIT(5) },
+ [IMX8MQ_RESET_PCIEPHY] = { SRC_PCIEPHY_RCR,
+ BIT(2) | BIT(1) },
+ [IMX8MQ_RESET_PCIEPHY_PERST] = { SRC_PCIEPHY_RCR, BIT(3) },
+ [IMX8MQ_RESET_PCIE_CTRL_APPS_EN] = { SRC_PCIEPHY_RCR, BIT(6) },
+ [IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF] = { SRC_PCIEPHY_RCR, BIT(11) },
+ [IMX8MQ_RESET_HDMI_PHY_APB_RESET] = { SRC_HDMI_RCR, BIT(0) },
+ [IMX8MQ_RESET_DISP_RESET] = { SRC_DISP_RCR, BIT(0) },
+ [IMX8MQ_RESET_GPU_RESET] = { SRC_GPU_RCR, BIT(0) },
+ [IMX8MQ_RESET_VPU_RESET] = { SRC_VPU_RCR, BIT(0) },
+ [IMX8MQ_RESET_PCIEPHY2] = { SRC_PCIE2_RCR,
+ BIT(2) | BIT(1) },
+ [IMX8MQ_RESET_PCIEPHY2_PERST] = { SRC_PCIE2_RCR, BIT(3) },
+ [IMX8MQ_RESET_PCIE2_CTRL_APPS_EN] = { SRC_PCIE2_RCR, BIT(6) },
+ [IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF] = { SRC_PCIE2_RCR, BIT(11) },
+ [IMX8MQ_RESET_MIPI_CSI1_CORE_RESET] = { SRC_MIPIPHY1_RCR, BIT(0) },
+ [IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET] = { SRC_MIPIPHY1_RCR, BIT(1) },
+ [IMX8MQ_RESET_MIPI_CSI1_ESC_RESET] = { SRC_MIPIPHY1_RCR, BIT(2) },
+ [IMX8MQ_RESET_MIPI_CSI2_CORE_RESET] = { SRC_MIPIPHY2_RCR, BIT(0) },
+ [IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET] = { SRC_MIPIPHY2_RCR, BIT(1) },
+ [IMX8MQ_RESET_MIPI_CSI2_ESC_RESET] = { SRC_MIPIPHY2_RCR, BIT(2) },
+ [IMX8MQ_RESET_DDRC1_PRST] = { SRC_DDRC_RCR, BIT(0) },
+ [IMX8MQ_RESET_DDRC1_CORE_RESET] = { SRC_DDRC_RCR, BIT(1) },
+ [IMX8MQ_RESET_DDRC1_PHY_RESET] = { SRC_DDRC_RCR, BIT(2) },
+ [IMX8MQ_RESET_DDRC2_PHY_RESET] = { SRC_DDRC2_RCR, BIT(0) },
+ [IMX8MQ_RESET_DDRC2_CORE_RESET] = { SRC_DDRC2_RCR, BIT(1) },
+ [IMX8MQ_RESET_DDRC2_PRST] = { SRC_DDRC2_RCR, BIT(2) },
+};
+
+static unsigned int
+imx8mq_src_prepare(struct imx7_src *imx7src, unsigned long id, bool assert)
+{
+ const unsigned int bit = imx7src->variant->signals[id].bit;
+ unsigned int value = assert ? bit : 0;
+
+ switch (id) {
+ case IMX8MQ_RESET_PCIEPHY:
+ case IMX8MQ_RESET_PCIEPHY2: /* fallthrough */
+ /*
+ * wait for more than 10us to release phy g_rst and
+ * btnrst
+ */
+ if (!assert)
+ udelay(10);
+ break;
+
+ case IMX8MQ_RESET_PCIE_CTRL_APPS_EN:
+ case IMX8MQ_RESET_PCIE2_CTRL_APPS_EN: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N: /* fallthrough */
+ value = assert ? 0 : bit;
+ break;
+ }
+
+ return value;
+}
+
+static const struct imx7_src_variant variant_imx8mq = {
+ .signals = imx8mq_src_signals,
+ .signals_num = ARRAY_SIZE(imx8mq_src_signals),
+ .prepare = imx8mq_src_prepare,
+};
+
static struct imx7_src *to_imx7_src(struct reset_controller_dev *rcdev)
{
return container_of(rcdev, struct imx7_src, rcdev);
@@ -175,6 +280,7 @@ static int imx7_reset_probe(struct platform_device *pdev)
static const struct of_device_id imx7_reset_dt_ids[] = {
{ .compatible = "fsl,imx7d-src", .data = &variant_imx7 },
+ { .compatible = "fsl,imx8mq-src", .data = &variant_imx8mq },
{ /* sentinel */ },
};
--
2.19.1
WARNING: multiple messages have this Message-ID (diff)
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: p.zabel@pengutronix.de
Cc: "A.s. Dong" <aisheng.dong@nxp.com>, Rob Herring <robh@kernel.org>,
Richard Zhu <hongxing.zhu@nxp.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Andrey Smirnov <andrew.smirnov@gmail.com>,
linux-kernel@vger.kernel.org, linux-imx@nxp.com,
Fabio Estevam <fabio.estevam@nxp.com>,
Leonard Crestez <leonard.crestez@nxp.com>,
cphealy@gmail.com, l.stach@pengutronix.de
Subject: [PATCH v4 3/3] reset: imx7: Add support for i.MX8MQ IP block variant
Date: Wed, 19 Dec 2018 17:07:00 -0800 [thread overview]
Message-ID: <20181220010700.8598-4-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20181220010700.8598-1-andrew.smirnov@gmail.com>
Add bits and pieces needed to support IP block variant found on
i.MX8MQ SoCs.
Cc: p.zabel@pengutronix.de
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: cphealy@gmail.com
Cc: l.stach@pengutronix.de
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "A.s. Dong" <aisheng.dong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-imx@nxp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/reset/Kconfig | 4 +-
drivers/reset/reset-imx7.c | 106 +++++++++++++++++++++++++++++++++++++
2 files changed, 108 insertions(+), 2 deletions(-)
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index c21da9fe51ec..add84b523be1 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -48,9 +48,9 @@ config RESET_HSDK
This enables the reset controller driver for HSDK board.
config RESET_IMX7
- bool "i.MX7 Reset Driver" if COMPILE_TEST
+ bool "i.MX7/8 Reset Driver" if COMPILE_TEST
depends on HAS_IOMEM
- default SOC_IMX7D
+ default SOC_IMX7D || (ARM64 && ARCH_MXC)
select MFD_SYSCON
help
This enables the reset controller driver for i.MX7 SoCs.
diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c
index 3a36d5863891..bb826935db6d 100644
--- a/drivers/reset/reset-imx7.c
+++ b/drivers/reset/reset-imx7.c
@@ -22,6 +22,7 @@
#include <linux/reset-controller.h>
#include <linux/regmap.h>
#include <dt-bindings/reset/imx7-reset.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
struct imx7_src_signal {
unsigned int offset, bit;
@@ -113,6 +114,110 @@ static const struct imx7_src_variant variant_imx7 = {
.prepare = imx7_src_prepare,
};
+enum imx8mq_src_registers {
+ SRC_A53RCR0 = 0x0004,
+ SRC_HDMI_RCR = 0x0030,
+ SRC_DISP_RCR = 0x0034,
+ SRC_GPU_RCR = 0x0040,
+ SRC_VPU_RCR = 0x0044,
+ SRC_PCIE2_RCR = 0x0048,
+ SRC_MIPIPHY1_RCR = 0x004c,
+ SRC_MIPIPHY2_RCR = 0x0050,
+ SRC_DDRC2_RCR = 0x1004,
+};
+
+static const struct imx7_src_signal imx8mq_src_signals[IMX8MQ_RESET_NUM] = {
+ [IMX8MQ_RESET_A53_CORE_POR_RESET0] = { SRC_A53RCR0, BIT(0) },
+ [IMX8MQ_RESET_A53_CORE_POR_RESET1] = { SRC_A53RCR0, BIT(1) },
+ [IMX8MQ_RESET_A53_CORE_POR_RESET2] = { SRC_A53RCR0, BIT(2) },
+ [IMX8MQ_RESET_A53_CORE_POR_RESET3] = { SRC_A53RCR0, BIT(3) },
+ [IMX8MQ_RESET_A53_CORE_RESET0] = { SRC_A53RCR0, BIT(4) },
+ [IMX8MQ_RESET_A53_CORE_RESET1] = { SRC_A53RCR0, BIT(5) },
+ [IMX8MQ_RESET_A53_CORE_RESET2] = { SRC_A53RCR0, BIT(6) },
+ [IMX8MQ_RESET_A53_CORE_RESET3] = { SRC_A53RCR0, BIT(7) },
+ [IMX8MQ_RESET_A53_DBG_RESET0] = { SRC_A53RCR0, BIT(8) },
+ [IMX8MQ_RESET_A53_DBG_RESET1] = { SRC_A53RCR0, BIT(9) },
+ [IMX8MQ_RESET_A53_DBG_RESET2] = { SRC_A53RCR0, BIT(10) },
+ [IMX8MQ_RESET_A53_DBG_RESET3] = { SRC_A53RCR0, BIT(11) },
+ [IMX8MQ_RESET_A53_ETM_RESET0] = { SRC_A53RCR0, BIT(12) },
+ [IMX8MQ_RESET_A53_ETM_RESET1] = { SRC_A53RCR0, BIT(13) },
+ [IMX8MQ_RESET_A53_ETM_RESET2] = { SRC_A53RCR0, BIT(14) },
+ [IMX8MQ_RESET_A53_ETM_RESET3] = { SRC_A53RCR0, BIT(15) },
+ [IMX8MQ_RESET_A53_SOC_DBG_RESET] = { SRC_A53RCR0, BIT(20) },
+ [IMX8MQ_RESET_A53_L2RESET] = { SRC_A53RCR0, BIT(21) },
+ [IMX8MQ_RESET_SW_NON_SCLR_M4C_RST] = { SRC_M4RCR, BIT(0) },
+ [IMX8MQ_RESET_OTG1_PHY_RESET] = { SRC_USBOPHY1_RCR, BIT(0) },
+ [IMX8MQ_RESET_OTG2_PHY_RESET] = { SRC_USBOPHY2_RCR, BIT(0) },
+ [IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N] = { SRC_MIPIPHY_RCR, BIT(1) },
+ [IMX8MQ_RESET_MIPI_DSI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(2) },
+ [IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(3) },
+ [IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N] = { SRC_MIPIPHY_RCR, BIT(4) },
+ [IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N] = { SRC_MIPIPHY_RCR, BIT(5) },
+ [IMX8MQ_RESET_PCIEPHY] = { SRC_PCIEPHY_RCR,
+ BIT(2) | BIT(1) },
+ [IMX8MQ_RESET_PCIEPHY_PERST] = { SRC_PCIEPHY_RCR, BIT(3) },
+ [IMX8MQ_RESET_PCIE_CTRL_APPS_EN] = { SRC_PCIEPHY_RCR, BIT(6) },
+ [IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF] = { SRC_PCIEPHY_RCR, BIT(11) },
+ [IMX8MQ_RESET_HDMI_PHY_APB_RESET] = { SRC_HDMI_RCR, BIT(0) },
+ [IMX8MQ_RESET_DISP_RESET] = { SRC_DISP_RCR, BIT(0) },
+ [IMX8MQ_RESET_GPU_RESET] = { SRC_GPU_RCR, BIT(0) },
+ [IMX8MQ_RESET_VPU_RESET] = { SRC_VPU_RCR, BIT(0) },
+ [IMX8MQ_RESET_PCIEPHY2] = { SRC_PCIE2_RCR,
+ BIT(2) | BIT(1) },
+ [IMX8MQ_RESET_PCIEPHY2_PERST] = { SRC_PCIE2_RCR, BIT(3) },
+ [IMX8MQ_RESET_PCIE2_CTRL_APPS_EN] = { SRC_PCIE2_RCR, BIT(6) },
+ [IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF] = { SRC_PCIE2_RCR, BIT(11) },
+ [IMX8MQ_RESET_MIPI_CSI1_CORE_RESET] = { SRC_MIPIPHY1_RCR, BIT(0) },
+ [IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET] = { SRC_MIPIPHY1_RCR, BIT(1) },
+ [IMX8MQ_RESET_MIPI_CSI1_ESC_RESET] = { SRC_MIPIPHY1_RCR, BIT(2) },
+ [IMX8MQ_RESET_MIPI_CSI2_CORE_RESET] = { SRC_MIPIPHY2_RCR, BIT(0) },
+ [IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET] = { SRC_MIPIPHY2_RCR, BIT(1) },
+ [IMX8MQ_RESET_MIPI_CSI2_ESC_RESET] = { SRC_MIPIPHY2_RCR, BIT(2) },
+ [IMX8MQ_RESET_DDRC1_PRST] = { SRC_DDRC_RCR, BIT(0) },
+ [IMX8MQ_RESET_DDRC1_CORE_RESET] = { SRC_DDRC_RCR, BIT(1) },
+ [IMX8MQ_RESET_DDRC1_PHY_RESET] = { SRC_DDRC_RCR, BIT(2) },
+ [IMX8MQ_RESET_DDRC2_PHY_RESET] = { SRC_DDRC2_RCR, BIT(0) },
+ [IMX8MQ_RESET_DDRC2_CORE_RESET] = { SRC_DDRC2_RCR, BIT(1) },
+ [IMX8MQ_RESET_DDRC2_PRST] = { SRC_DDRC2_RCR, BIT(2) },
+};
+
+static unsigned int
+imx8mq_src_prepare(struct imx7_src *imx7src, unsigned long id, bool assert)
+{
+ const unsigned int bit = imx7src->variant->signals[id].bit;
+ unsigned int value = assert ? bit : 0;
+
+ switch (id) {
+ case IMX8MQ_RESET_PCIEPHY:
+ case IMX8MQ_RESET_PCIEPHY2: /* fallthrough */
+ /*
+ * wait for more than 10us to release phy g_rst and
+ * btnrst
+ */
+ if (!assert)
+ udelay(10);
+ break;
+
+ case IMX8MQ_RESET_PCIE_CTRL_APPS_EN:
+ case IMX8MQ_RESET_PCIE2_CTRL_APPS_EN: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N: /* fallthrough */
+ value = assert ? 0 : bit;
+ break;
+ }
+
+ return value;
+}
+
+static const struct imx7_src_variant variant_imx8mq = {
+ .signals = imx8mq_src_signals,
+ .signals_num = ARRAY_SIZE(imx8mq_src_signals),
+ .prepare = imx8mq_src_prepare,
+};
+
static struct imx7_src *to_imx7_src(struct reset_controller_dev *rcdev)
{
return container_of(rcdev, struct imx7_src, rcdev);
@@ -175,6 +280,7 @@ static int imx7_reset_probe(struct platform_device *pdev)
static const struct of_device_id imx7_reset_dt_ids[] = {
{ .compatible = "fsl,imx7d-src", .data = &variant_imx7 },
+ { .compatible = "fsl,imx8mq-src", .data = &variant_imx8mq },
{ /* sentinel */ },
};
--
2.19.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2018-12-20 1:07 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-20 1:06 [PATCH v4 0/3] Reset controller support for i.MX8MQ Andrey Smirnov
2018-12-20 1:06 ` Andrey Smirnov
2018-12-20 1:06 ` [PATCH v4 1/3] reset: imx7: Add plubming to support multiple IP variants Andrey Smirnov
2018-12-20 1:06 ` Andrey Smirnov
2019-01-17 17:16 ` Philipp Zabel
2019-01-17 17:16 ` Philipp Zabel
2019-01-17 22:20 ` Andrey Smirnov
2019-01-17 22:20 ` Andrey Smirnov
2019-01-17 22:20 ` Andrey Smirnov
2018-12-20 1:06 ` [PATCH v4 2/3] dt-bindings: reset: imx7: Document usage on i.MX8MQ SoCs Andrey Smirnov
2018-12-20 1:06 ` Andrey Smirnov
2019-01-17 16:45 ` Philipp Zabel
2019-01-17 16:45 ` Philipp Zabel
2019-01-17 22:38 ` Andrey Smirnov
2019-01-17 22:38 ` Andrey Smirnov
2019-01-23 10:52 ` Philipp Zabel
2019-01-23 10:52 ` Philipp Zabel
2019-01-24 5:33 ` Andrey Smirnov
2019-01-24 5:33 ` Andrey Smirnov
2019-01-24 9:11 ` Philipp Zabel
2019-01-24 9:11 ` Philipp Zabel
2018-12-20 1:07 ` Andrey Smirnov [this message]
2018-12-20 1:07 ` [PATCH v4 3/3] reset: imx7: Add support for i.MX8MQ IP block variant Andrey Smirnov
2019-01-15 4:41 ` [PATCH v4 0/3] Reset controller support for i.MX8MQ Andrey Smirnov
2019-01-15 4:41 ` Andrey Smirnov
2019-01-15 4:41 ` Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181220010700.8598-4-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=aisheng.dong@nxp.com \
--cc=cphealy@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=hongxing.zhu@nxp.com \
--cc=l.stach@pengutronix.de \
--cc=leonard.crestez@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.