From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> To: shawnguo@kernel.org, leoyang.li@nxp.com, robh+dt@kernel.org Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, a.tropschug@ebs-systart.com, m.bittner@ebs-systart.com, amit.kucheria@linaro.org, Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Subject: [PATCH 3/3] arm64: dts: freescale: Add devicetree for Oxalis Date: Thu, 10 Jan 2019 13:38:21 +0530 [thread overview] Message-ID: <20190110080821.30280-4-manivannan.sadhasivam@linaro.org> (raw) In-Reply-To: <20190110080821.30280-1-manivannan.sadhasivam@linaro.org> Add devicetree support for Oxalis SoM board from EBS-SYSTART. This board is one of the 96Boards Enterprise Edition platform. Below are some of the key features of this board: * SoC: NXP Layerscape LS1012A * RAM: 1GB DDR3L * PMU: NXP VR5100 * Storage: 64MByte SPI Flash for bootloader and RCW, MicroSD Card, SATA * Connectivity: 2x Ethernet * USB: 2x USB3.0 More information about this board can be found in 96Boards product page: https://www.96boards.org/product/oxalis/ Ethernet and SPI flash are not supported yet! Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/fsl-ls1012a-oxalis.dts | 96 +++++++++++++++++++ 2 files changed, 97 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index f9be2426f83c..d8152cc06b3f 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts new file mode 100644 index 000000000000..760a3e258c96 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Oxalis + * + * Copyright (c) 2019 Manivannan Sadhasivam + * + */ + +/dts-v1/; + +#include "fsl-ls1012a.dtsi" + +/ { + model = "Oxalis"; + compatible = "ebs-systart,oxalis", "fsl,ls1012a"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + frame-master; + bitclock-master; + system-clock-frequency = <25000000>; + }; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&esdhc1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + codec: sgtl5000@a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0xa>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_1p8v>; + clocks = <&sys_mclk>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&sai2 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> To: shawnguo@kernel.org, leoyang.li@nxp.com, robh+dt@kernel.org Cc: devicetree@vger.kernel.org, a.tropschug@ebs-systart.com, m.bittner@ebs-systart.com, linux-kernel@vger.kernel.org, amit.kucheria@linaro.org, Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/3] arm64: dts: freescale: Add devicetree for Oxalis Date: Thu, 10 Jan 2019 13:38:21 +0530 [thread overview] Message-ID: <20190110080821.30280-4-manivannan.sadhasivam@linaro.org> (raw) In-Reply-To: <20190110080821.30280-1-manivannan.sadhasivam@linaro.org> Add devicetree support for Oxalis SoM board from EBS-SYSTART. This board is one of the 96Boards Enterprise Edition platform. Below are some of the key features of this board: * SoC: NXP Layerscape LS1012A * RAM: 1GB DDR3L * PMU: NXP VR5100 * Storage: 64MByte SPI Flash for bootloader and RCW, MicroSD Card, SATA * Connectivity: 2x Ethernet * USB: 2x USB3.0 More information about this board can be found in 96Boards product page: https://www.96boards.org/product/oxalis/ Ethernet and SPI flash are not supported yet! Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/fsl-ls1012a-oxalis.dts | 96 +++++++++++++++++++ 2 files changed, 97 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index f9be2426f83c..d8152cc06b3f 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts new file mode 100644 index 000000000000..760a3e258c96 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Oxalis + * + * Copyright (c) 2019 Manivannan Sadhasivam + * + */ + +/dts-v1/; + +#include "fsl-ls1012a.dtsi" + +/ { + model = "Oxalis"; + compatible = "ebs-systart,oxalis", "fsl,ls1012a"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + frame-master; + bitclock-master; + system-clock-frequency = <25000000>; + }; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&esdhc1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + codec: sgtl5000@a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0xa>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_1p8v>; + clocks = <&sys_mclk>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&sai2 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-01-10 8:08 UTC|newest] Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-01-10 8:08 [PATCH 0/3] Add Oxalis board support Manivannan Sadhasivam 2019-01-10 8:08 ` Manivannan Sadhasivam 2019-01-10 8:08 ` [PATCH 1/3] dt-bindings: vendor-prefixes: Add EBS-SYSTART GmbH Vendor Prefix Manivannan Sadhasivam 2019-01-10 8:08 ` Manivannan Sadhasivam 2019-01-10 16:51 ` Rob Herring 2019-01-10 16:51 ` Rob Herring 2019-01-10 16:51 ` Rob Herring 2019-01-10 8:08 ` [PATCH 2/3] dt-bindings: arm: fsl: Add devicetree binding for Oxalis Manivannan Sadhasivam 2019-01-10 8:08 ` Manivannan Sadhasivam 2019-01-10 8:08 ` Manivannan Sadhasivam [this message] 2019-01-10 8:08 ` [PATCH 3/3] arm64: dts: freescale: Add devicetree " Manivannan Sadhasivam 2019-01-10 16:51 ` Rob Herring 2019-01-10 16:51 ` Rob Herring 2019-01-10 16:51 ` Rob Herring 2019-01-10 16:49 ` [PATCH 0/3] Add Oxalis board support Rob Herring 2019-01-10 16:49 ` Rob Herring 2019-01-10 16:49 ` Rob Herring
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190110080821.30280-4-manivannan.sadhasivam@linaro.org \ --to=manivannan.sadhasivam@linaro.org \ --cc=a.tropschug@ebs-systart.com \ --cc=amit.kucheria@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=leoyang.li@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=m.bittner@ebs-systart.com \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.