From: Lubomir Rintel <lkundrak@v3.sk>
To: Andy Shevchenko <andy@infradead.org>, Darren Hart <dvhart@infradead.org>
Cc: Rob Herring <robh+dt@kernel.org>,
Russell King <linux@armlinux.org.uk>,
Mark Rutland <mark.rutland@arm.com>,
platform-driver-x86@vger.kernel.org, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Lubomir Rintel <lkundrak@v3.sk>, Pavel Machek <pavel@ucw.cz>
Subject: [PATCH v5 01/10] dt-bindings: olpc,xo1.75-ec: Add OLPC XO-1.75 EC bindings
Date: Thu, 10 Jan 2019 18:58:36 +0100 [thread overview]
Message-ID: <20190110175845.1203986-2-lkundrak@v3.sk> (raw)
In-Reply-To: <20190110175845.1203986-1-lkundrak@v3.sk>
The OLPC XO-1.75 Embedded Controller is a SPI master that uses extra
signals for handshaking. It needs to know when is the slave (Linux)
side's TX FIFO ready for transfer (the ready-gpio signal on the SPI
controller node) and when does it wish to respond with a command (the
cmd-gpio property).
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
Changes since v1:
- s/cmd-gpio/cmd-gpios/
- s/ready-gpio/ready-gpios/ in the documentation paragraph
- Remove status = "okay" from the example
.../bindings/misc/olpc,xo1.75-ec.txt | 23 +++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt
diff --git a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt
new file mode 100644
index 000000000000..8c4d649cdd8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt
@@ -0,0 +1,23 @@
+OLPC XO-1.75 Embedded Controller
+
+Required properties:
+- compatible: Should be "olpc,xo1.75-ec".
+- cmd-gpios: gpio specifier of the CMD pin
+
+The embedded controller requires the SPI controller driver to signal readiness
+to receive a transfer (that is, when TX FIFO contains the response data) by
+strobing the ACK pin with the ready signal. See the "ready-gpios" property of the
+SSP binding as documented in:
+<Documentation/devicetree/bindings/spi/spi-pxa2xx.txt>.
+
+Example:
+ &ssp3 {
+ spi-slave;
+ ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>;
+
+ slave {
+ compatible = "olpc,xo1.75-ec";
+ spi-cpha;
+ cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>;
+ };
+ };
--
2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Lubomir Rintel <lkundrak@v3.sk>
To: Andy Shevchenko <andy@infradead.org>, Darren Hart <dvhart@infradead.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org,
Russell King <linux@armlinux.org.uk>,
platform-driver-x86@vger.kernel.org,
Lubomir Rintel <lkundrak@v3.sk>, Rob Herring <robh+dt@kernel.org>,
Pavel Machek <pavel@ucw.cz>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 01/10] dt-bindings: olpc, xo1.75-ec: Add OLPC XO-1.75 EC bindings
Date: Thu, 10 Jan 2019 18:58:36 +0100 [thread overview]
Message-ID: <20190110175845.1203986-2-lkundrak@v3.sk> (raw)
In-Reply-To: <20190110175845.1203986-1-lkundrak@v3.sk>
The OLPC XO-1.75 Embedded Controller is a SPI master that uses extra
signals for handshaking. It needs to know when is the slave (Linux)
side's TX FIFO ready for transfer (the ready-gpio signal on the SPI
controller node) and when does it wish to respond with a command (the
cmd-gpio property).
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
Changes since v1:
- s/cmd-gpio/cmd-gpios/
- s/ready-gpio/ready-gpios/ in the documentation paragraph
- Remove status = "okay" from the example
.../bindings/misc/olpc,xo1.75-ec.txt | 23 +++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt
diff --git a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt
new file mode 100644
index 000000000000..8c4d649cdd8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt
@@ -0,0 +1,23 @@
+OLPC XO-1.75 Embedded Controller
+
+Required properties:
+- compatible: Should be "olpc,xo1.75-ec".
+- cmd-gpios: gpio specifier of the CMD pin
+
+The embedded controller requires the SPI controller driver to signal readiness
+to receive a transfer (that is, when TX FIFO contains the response data) by
+strobing the ACK pin with the ready signal. See the "ready-gpios" property of the
+SSP binding as documented in:
+<Documentation/devicetree/bindings/spi/spi-pxa2xx.txt>.
+
+Example:
+ &ssp3 {
+ spi-slave;
+ ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>;
+
+ slave {
+ compatible = "olpc,xo1.75-ec";
+ spi-cpha;
+ cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>;
+ };
+ };
--
2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Lubomir Rintel <lkundrak@v3.sk>
To: Andy Shevchenko <andy@infradead.org>, Darren Hart <dvhart@infradead.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org,
Russell King <linux@armlinux.org.uk>,
platform-driver-x86@vger.kernel.org,
Lubomir Rintel <lkundrak@v3.sk>, Rob Herring <robh+dt@kernel.org>,
Pavel Machek <pavel@ucw.cz>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 01/10] dt-bindings: olpc, xo1.75-ec: Add OLPC XO-1.75 EC bindings
Date: Thu, 10 Jan 2019 18:58:36 +0100 [thread overview]
Message-ID: <20190110175845.1203986-2-lkundrak@v3.sk> (raw)
In-Reply-To: <20190110175845.1203986-1-lkundrak@v3.sk>
The OLPC XO-1.75 Embedded Controller is a SPI master that uses extra
signals for handshaking. It needs to know when is the slave (Linux)
side's TX FIFO ready for transfer (the ready-gpio signal on the SPI
controller node) and when does it wish to respond with a command (the
cmd-gpio property).
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
Changes since v1:
- s/cmd-gpio/cmd-gpios/
- s/ready-gpio/ready-gpios/ in the documentation paragraph
- Remove status = "okay" from the example
.../bindings/misc/olpc,xo1.75-ec.txt | 23 +++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt
diff --git a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt
new file mode 100644
index 000000000000..8c4d649cdd8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt
@@ -0,0 +1,23 @@
+OLPC XO-1.75 Embedded Controller
+
+Required properties:
+- compatible: Should be "olpc,xo1.75-ec".
+- cmd-gpios: gpio specifier of the CMD pin
+
+The embedded controller requires the SPI controller driver to signal readiness
+to receive a transfer (that is, when TX FIFO contains the response data) by
+strobing the ACK pin with the ready signal. See the "ready-gpios" property of the
+SSP binding as documented in:
+<Documentation/devicetree/bindings/spi/spi-pxa2xx.txt>.
+
+Example:
+ &ssp3 {
+ spi-slave;
+ ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>;
+
+ slave {
+ compatible = "olpc,xo1.75-ec";
+ spi-cpha;
+ cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>;
+ };
+ };
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-01-10 18:00 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-10 17:58 [PATCH v5 0/10] Add support for OLPC XO 1.75 Embedded Controller Lubomir Rintel
2019-01-10 17:58 ` Lubomir Rintel
2019-01-10 17:58 ` Lubomir Rintel [this message]
2019-01-10 17:58 ` [PATCH v5 01/10] dt-bindings: olpc, xo1.75-ec: Add OLPC XO-1.75 EC bindings Lubomir Rintel
2019-01-10 17:58 ` Lubomir Rintel
2019-01-11 14:36 ` [PATCH v5 01/10] dt-bindings: olpc,xo1.75-ec: " Rob Herring
2019-01-11 14:36 ` Rob Herring
2019-01-11 14:36 ` Rob Herring
2019-02-21 1:21 ` Darren Hart
2019-02-21 1:21 ` Darren Hart
2019-02-21 1:21 ` Darren Hart
2019-01-10 17:58 ` [PATCH v5 02/10] Platform: OLPC: Remove an unused include Lubomir Rintel
2019-01-10 17:58 ` Lubomir Rintel
2019-01-10 17:58 ` Lubomir Rintel
2019-01-10 17:58 ` [PATCH v5 03/10] Platform: OLPC: Move EC-specific functionality out from x86 Lubomir Rintel
2019-01-10 17:58 ` Lubomir Rintel
2019-01-10 17:58 ` [PATCH v5 04/10] Platform: OLPC: Avoid a warning if the EC didn't register yet Lubomir Rintel
2019-01-10 17:58 ` Lubomir Rintel
2019-01-10 17:58 ` [PATCH v5 05/10] Platform: OLPC: Use BIT() and GENMASK() for event masks Lubomir Rintel
2019-01-10 17:58 ` Lubomir Rintel
2019-01-10 17:58 ` [PATCH v5 06/10] Platform: OLPC: Add XO-1.75 EC driver Lubomir Rintel
2019-01-10 17:58 ` Lubomir Rintel
2019-02-21 1:22 ` Darren Hart
2019-02-21 1:22 ` Darren Hart
2019-02-21 1:22 ` Darren Hart
2019-02-21 13:28 ` Andy Shevchenko
2019-02-21 13:28 ` Andy Shevchenko
2019-02-21 13:28 ` Andy Shevchenko
2019-01-10 17:58 ` [PATCH v5 07/10] Platform: OLPC: Add a regulator for the DCON Lubomir Rintel
2019-01-10 17:58 ` Lubomir Rintel
2019-01-10 17:58 ` [PATCH v5 08/10] power: supply: olpc_battery: Allow building the driver on non-x86 Lubomir Rintel
2019-01-10 17:58 ` Lubomir Rintel
2019-02-19 23:17 ` Sebastian Reichel
2019-02-19 23:17 ` Sebastian Reichel
2019-01-10 17:58 ` [PATCH v5 09/10] ARM: export arm_pm_restart Lubomir Rintel
2019-01-10 17:58 ` Lubomir Rintel
2019-01-10 17:58 ` [PATCH v5 10/10] Platform: OLPC: Add restart support to XO-1.75 EC driver Lubomir Rintel
2019-01-10 17:58 ` Lubomir Rintel
2019-02-11 11:46 ` [PATCH v5 0/10] Add support for OLPC XO 1.75 Embedded Controller Lubomir Rintel
2019-02-11 11:46 ` Lubomir Rintel
2019-02-11 11:49 ` Andy Shevchenko
2019-02-11 11:49 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190110175845.1203986-2-lkundrak@v3.sk \
--to=lkundrak@v3.sk \
--cc=andy@infradead.org \
--cc=devicetree@vger.kernel.org \
--cc=dvhart@infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pavel@ucw.cz \
--cc=platform-driver-x86@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.