From: Martin Blumenstingl <martin.blumenstingl@googlemail.com> To: linux-amlogic@lists.infradead.org, khilman@baylibre.com Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 0/7] ARM: dts: meson: chip temperature (hwmon) support Date: Fri, 18 Jan 2019 23:52:20 +0100 [thread overview] Message-ID: <20190118225227.6516-1-martin.blumenstingl@googlemail.com> (raw) Now that the Meson SAR ADC driver can get the chip temperature on Meson8, Meson8b and Meson8m2 (see [0]) we can add the missing bits to the .dts{,i} and enable iio-hwmon for all boards where this could be tested successfully. This was successfully tested on multiple boards: - Meson8b Odroid-C1 (me) - Meson8b EC-100 (me) - Meson8m2 M8S (not upstream yet, me) - Meson8m2 MXIII-Plus (an earlier version of this series, Oleg Ivanov) compile-time dependencies: - none runtime dependencies: - my other series "meson-saradc: temperature sensor support for Meson8b/Meson8m2" from [0] - multi_v7_defconfig already enables CONFIG_SENSORS_IIO_HWMON, so there's no patch which selects that. Changes since v1 at [1]: - added patch 1 at the start of the series because patches #3 and #4 require the HHI memory region to be a syscon, which is what patch #1 provides. Thanks for spotting this Kevin! [0] https://patchwork.kernel.org/cover/10744059/ [1] https://patchwork.kernel.org/cover/10760963/ Martin Blumenstingl (7): ARM: dts: meson: switch the clock controller to the HHI register area ARM: dts: meson8m2: use the Meson8m2 specific SAR ADC compatible ARM: dts: meson8: add the temperature calibration data for the SAR ADC ARM: dts: meson8b: add the temperature calibration data for the SAR ADC ARM: dts: meson8b: ec100: add iio-hwmon for the chip temperature ARM: dts: meson8b: odroidc1: add iio-hwmon for the chip temperature ARM: dts: meson8m2: mxiii-plus: add iio-hwmon for the chip temperature arch/arm/boot/dts/meson.dtsi | 7 +++++++ arch/arm/boot/dts/meson8.dtsi | 23 ++++++++++++++++------- arch/arm/boot/dts/meson8b-ec100.dts | 5 +++++ arch/arm/boot/dts/meson8b-odroidc1.dts | 5 +++++ arch/arm/boot/dts/meson8b.dtsi | 23 ++++++++++++++++------- arch/arm/boot/dts/meson8m2-mxiii-plus.dts | 5 +++++ arch/arm/boot/dts/meson8m2.dtsi | 4 ++++ 7 files changed, 58 insertions(+), 14 deletions(-) -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com> To: linux-amlogic@lists.infradead.org, khilman@baylibre.com Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 0/7] ARM: dts: meson: chip temperature (hwmon) support Date: Fri, 18 Jan 2019 23:52:20 +0100 [thread overview] Message-ID: <20190118225227.6516-1-martin.blumenstingl@googlemail.com> (raw) Now that the Meson SAR ADC driver can get the chip temperature on Meson8, Meson8b and Meson8m2 (see [0]) we can add the missing bits to the .dts{,i} and enable iio-hwmon for all boards where this could be tested successfully. This was successfully tested on multiple boards: - Meson8b Odroid-C1 (me) - Meson8b EC-100 (me) - Meson8m2 M8S (not upstream yet, me) - Meson8m2 MXIII-Plus (an earlier version of this series, Oleg Ivanov) compile-time dependencies: - none runtime dependencies: - my other series "meson-saradc: temperature sensor support for Meson8b/Meson8m2" from [0] - multi_v7_defconfig already enables CONFIG_SENSORS_IIO_HWMON, so there's no patch which selects that. Changes since v1 at [1]: - added patch 1 at the start of the series because patches #3 and #4 require the HHI memory region to be a syscon, which is what patch #1 provides. Thanks for spotting this Kevin! [0] https://patchwork.kernel.org/cover/10744059/ [1] https://patchwork.kernel.org/cover/10760963/ Martin Blumenstingl (7): ARM: dts: meson: switch the clock controller to the HHI register area ARM: dts: meson8m2: use the Meson8m2 specific SAR ADC compatible ARM: dts: meson8: add the temperature calibration data for the SAR ADC ARM: dts: meson8b: add the temperature calibration data for the SAR ADC ARM: dts: meson8b: ec100: add iio-hwmon for the chip temperature ARM: dts: meson8b: odroidc1: add iio-hwmon for the chip temperature ARM: dts: meson8m2: mxiii-plus: add iio-hwmon for the chip temperature arch/arm/boot/dts/meson.dtsi | 7 +++++++ arch/arm/boot/dts/meson8.dtsi | 23 ++++++++++++++++------- arch/arm/boot/dts/meson8b-ec100.dts | 5 +++++ arch/arm/boot/dts/meson8b-odroidc1.dts | 5 +++++ arch/arm/boot/dts/meson8b.dtsi | 23 ++++++++++++++++------- arch/arm/boot/dts/meson8m2-mxiii-plus.dts | 5 +++++ arch/arm/boot/dts/meson8m2.dtsi | 4 ++++ 7 files changed, 58 insertions(+), 14 deletions(-) -- 2.20.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
next reply other threads:[~2019-01-18 22:53 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-01-18 22:52 Martin Blumenstingl [this message] 2019-01-18 22:52 ` [PATCH v2 0/7] ARM: dts: meson: chip temperature (hwmon) support Martin Blumenstingl 2019-01-18 22:52 ` [PATCH v2 1/7] ARM: dts: meson: switch the clock controller to the HHI register area Martin Blumenstingl 2019-01-18 22:52 ` Martin Blumenstingl 2019-01-18 22:52 ` [PATCH v2 2/7] ARM: dts: meson8m2: use the Meson8m2 specific SAR ADC compatible Martin Blumenstingl 2019-01-18 22:52 ` Martin Blumenstingl 2019-01-18 22:52 ` [PATCH v2 3/7] ARM: dts: meson8: add the temperature calibration data for the SAR ADC Martin Blumenstingl 2019-01-18 22:52 ` Martin Blumenstingl 2019-01-18 22:52 ` [PATCH v2 4/7] ARM: dts: meson8b: " Martin Blumenstingl 2019-01-18 22:52 ` Martin Blumenstingl 2019-01-18 22:52 ` [PATCH v2 5/7] ARM: dts: meson8b: ec100: add iio-hwmon for the chip temperature Martin Blumenstingl 2019-01-18 22:52 ` Martin Blumenstingl 2019-01-18 22:52 ` [PATCH v2 6/7] ARM: dts: meson8b: odroidc1: " Martin Blumenstingl 2019-01-18 22:52 ` Martin Blumenstingl 2019-01-18 22:52 ` [PATCH v2 7/7] ARM: dts: meson8m2: mxiii-plus: " Martin Blumenstingl 2019-01-18 22:52 ` Martin Blumenstingl 2019-02-07 3:41 ` [PATCH v2 0/7] ARM: dts: meson: chip temperature (hwmon) support Kevin Hilman 2019-02-07 3:41 ` Kevin Hilman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190118225227.6516-1-martin.blumenstingl@googlemail.com \ --to=martin.blumenstingl@googlemail.com \ --cc=khilman@baylibre.com \ --cc=linux-amlogic@lists.infradead.org \ --cc=linux-arm-kernel@lists.infradead.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.