All of lore.kernel.org
 help / color / mirror / Atom feed
From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
To: Ludovic.Desroches@microchip.com, vkoul@kernel.org
Cc: dmaengine@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Codrin.Ciubotariu@microchip.com
Subject: [v2] dmaengine: at_xdmac: Fix wrongfull report of a channel as in use
Date: Wed, 23 Jan 2019 16:33:47 +0000	[thread overview]
Message-ID: <20190123163339.17506-1-codrin.ciubotariu@microchip.com> (raw)

From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>

atchan->status variable is used to store two different information:
 - pass channel interrupts status from interrupt handler to tasklet;
 - channel information like whether it is cyclic or paused;

This causes a bug when device_terminate_all() is called,
(AT_XDMAC_CHAN_IS_CYCLIC cleared on atchan->status) and then a late End
of Block interrupt arrives (AT_XDMAC_CIS_BIS), which sets bit 0 of
atchan->status. Bit 0 is also used for AT_XDMAC_CHAN_IS_CYCLIC, so when
a new descriptor for a cyclic transfer is created, the driver reports
the channel as in use:

if (test_and_set_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status)) {
	dev_err(chan2dev(chan), "channel currently used\n");
	return NULL;
}

This patch fixes the bug by adding a different struct member to keep
the interrupts status separated from the channel status bits.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
---
 drivers/dma/at_xdmac.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index 4e557684f792..fe69dccfa0c0 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -203,6 +203,7 @@ struct at_xdmac_chan {
 	u32				save_cim;
 	u32				save_cnda;
 	u32				save_cndc;
+	u32				irq_status;
 	unsigned long			status;
 	struct tasklet_struct		tasklet;
 	struct dma_slave_config		sconfig;
@@ -1580,8 +1581,8 @@ static void at_xdmac_tasklet(unsigned long data)
 	struct at_xdmac_desc	*desc;
 	u32			error_mask;
 
-	dev_dbg(chan2dev(&atchan->chan), "%s: status=0x%08lx\n",
-		 __func__, atchan->status);
+	dev_dbg(chan2dev(&atchan->chan), "%s: status=0x%08x\n",
+		__func__, atchan->irq_status);
 
 	error_mask = AT_XDMAC_CIS_RBEIS
 		     | AT_XDMAC_CIS_WBEIS
@@ -1589,15 +1590,15 @@ static void at_xdmac_tasklet(unsigned long data)
 
 	if (at_xdmac_chan_is_cyclic(atchan)) {
 		at_xdmac_handle_cyclic(atchan);
-	} else if ((atchan->status & AT_XDMAC_CIS_LIS)
-		   || (atchan->status & error_mask)) {
+	} else if ((atchan->irq_status & AT_XDMAC_CIS_LIS)
+		   || (atchan->irq_status & error_mask)) {
 		struct dma_async_tx_descriptor  *txd;
 
-		if (atchan->status & AT_XDMAC_CIS_RBEIS)
+		if (atchan->irq_status & AT_XDMAC_CIS_RBEIS)
 			dev_err(chan2dev(&atchan->chan), "read bus error!!!");
-		if (atchan->status & AT_XDMAC_CIS_WBEIS)
+		if (atchan->irq_status & AT_XDMAC_CIS_WBEIS)
 			dev_err(chan2dev(&atchan->chan), "write bus error!!!");
-		if (atchan->status & AT_XDMAC_CIS_ROIS)
+		if (atchan->irq_status & AT_XDMAC_CIS_ROIS)
 			dev_err(chan2dev(&atchan->chan), "request overflow error!!!");
 
 		spin_lock(&atchan->lock);
@@ -1652,7 +1653,7 @@ static irqreturn_t at_xdmac_interrupt(int irq, void *dev_id)
 			atchan = &atxdmac->chan[i];
 			chan_imr = at_xdmac_chan_read(atchan, AT_XDMAC_CIM);
 			chan_status = at_xdmac_chan_read(atchan, AT_XDMAC_CIS);
-			atchan->status = chan_status & chan_imr;
+			atchan->irq_status = chan_status & chan_imr;
 			dev_vdbg(atxdmac->dma.dev,
 				 "%s: chan%d: imr=0x%x, status=0x%x\n",
 				 __func__, i, chan_imr, chan_status);
@@ -1666,7 +1667,7 @@ static irqreturn_t at_xdmac_interrupt(int irq, void *dev_id)
 				 at_xdmac_chan_read(atchan, AT_XDMAC_CDA),
 				 at_xdmac_chan_read(atchan, AT_XDMAC_CUBC));
 
-			if (atchan->status & (AT_XDMAC_CIS_RBEIS | AT_XDMAC_CIS_WBEIS))
+			if (atchan->irq_status & (AT_XDMAC_CIS_RBEIS | AT_XDMAC_CIS_WBEIS))
 				at_xdmac_write(atxdmac, AT_XDMAC_GD, atchan->mask);
 
 			tasklet_schedule(&atchan->tasklet);

WARNING: multiple messages have this Message-ID (diff)
From: <Codrin.Ciubotariu@microchip.com>
To: <Ludovic.Desroches@microchip.com>, <vkoul@kernel.org>
Cc: <dmaengine@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <Codrin.Ciubotariu@microchip.com>
Subject: [PATCH v2] dmaengine: at_xdmac: Fix wrongfull report of a channel as in use
Date: Wed, 23 Jan 2019 16:33:47 +0000	[thread overview]
Message-ID: <20190123163339.17506-1-codrin.ciubotariu@microchip.com> (raw)

From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>

atchan->status variable is used to store two different information:
 - pass channel interrupts status from interrupt handler to tasklet;
 - channel information like whether it is cyclic or paused;

This causes a bug when device_terminate_all() is called,
(AT_XDMAC_CHAN_IS_CYCLIC cleared on atchan->status) and then a late End
of Block interrupt arrives (AT_XDMAC_CIS_BIS), which sets bit 0 of
atchan->status. Bit 0 is also used for AT_XDMAC_CHAN_IS_CYCLIC, so when
a new descriptor for a cyclic transfer is created, the driver reports
the channel as in use:

if (test_and_set_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status)) {
	dev_err(chan2dev(chan), "channel currently used\n");
	return NULL;
}

This patch fixes the bug by adding a different struct member to keep
the interrupts status separated from the channel status bits.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
---
 drivers/dma/at_xdmac.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index 4e557684f792..fe69dccfa0c0 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -203,6 +203,7 @@ struct at_xdmac_chan {
 	u32				save_cim;
 	u32				save_cnda;
 	u32				save_cndc;
+	u32				irq_status;
 	unsigned long			status;
 	struct tasklet_struct		tasklet;
 	struct dma_slave_config		sconfig;
@@ -1580,8 +1581,8 @@ static void at_xdmac_tasklet(unsigned long data)
 	struct at_xdmac_desc	*desc;
 	u32			error_mask;
 
-	dev_dbg(chan2dev(&atchan->chan), "%s: status=0x%08lx\n",
-		 __func__, atchan->status);
+	dev_dbg(chan2dev(&atchan->chan), "%s: status=0x%08x\n",
+		__func__, atchan->irq_status);
 
 	error_mask = AT_XDMAC_CIS_RBEIS
 		     | AT_XDMAC_CIS_WBEIS
@@ -1589,15 +1590,15 @@ static void at_xdmac_tasklet(unsigned long data)
 
 	if (at_xdmac_chan_is_cyclic(atchan)) {
 		at_xdmac_handle_cyclic(atchan);
-	} else if ((atchan->status & AT_XDMAC_CIS_LIS)
-		   || (atchan->status & error_mask)) {
+	} else if ((atchan->irq_status & AT_XDMAC_CIS_LIS)
+		   || (atchan->irq_status & error_mask)) {
 		struct dma_async_tx_descriptor  *txd;
 
-		if (atchan->status & AT_XDMAC_CIS_RBEIS)
+		if (atchan->irq_status & AT_XDMAC_CIS_RBEIS)
 			dev_err(chan2dev(&atchan->chan), "read bus error!!!");
-		if (atchan->status & AT_XDMAC_CIS_WBEIS)
+		if (atchan->irq_status & AT_XDMAC_CIS_WBEIS)
 			dev_err(chan2dev(&atchan->chan), "write bus error!!!");
-		if (atchan->status & AT_XDMAC_CIS_ROIS)
+		if (atchan->irq_status & AT_XDMAC_CIS_ROIS)
 			dev_err(chan2dev(&atchan->chan), "request overflow error!!!");
 
 		spin_lock(&atchan->lock);
@@ -1652,7 +1653,7 @@ static irqreturn_t at_xdmac_interrupt(int irq, void *dev_id)
 			atchan = &atxdmac->chan[i];
 			chan_imr = at_xdmac_chan_read(atchan, AT_XDMAC_CIM);
 			chan_status = at_xdmac_chan_read(atchan, AT_XDMAC_CIS);
-			atchan->status = chan_status & chan_imr;
+			atchan->irq_status = chan_status & chan_imr;
 			dev_vdbg(atxdmac->dma.dev,
 				 "%s: chan%d: imr=0x%x, status=0x%x\n",
 				 __func__, i, chan_imr, chan_status);
@@ -1666,7 +1667,7 @@ static irqreturn_t at_xdmac_interrupt(int irq, void *dev_id)
 				 at_xdmac_chan_read(atchan, AT_XDMAC_CDA),
 				 at_xdmac_chan_read(atchan, AT_XDMAC_CUBC));
 
-			if (atchan->status & (AT_XDMAC_CIS_RBEIS | AT_XDMAC_CIS_WBEIS))
+			if (atchan->irq_status & (AT_XDMAC_CIS_RBEIS | AT_XDMAC_CIS_WBEIS))
 				at_xdmac_write(atxdmac, AT_XDMAC_GD, atchan->mask);
 
 			tasklet_schedule(&atchan->tasklet);
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: <Codrin.Ciubotariu@microchip.com>
To: <Ludovic.Desroches@microchip.com>, <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org, Codrin.Ciubotariu@microchip.com,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] dmaengine: at_xdmac: Fix wrongfull report of a channel as in use
Date: Wed, 23 Jan 2019 16:33:47 +0000	[thread overview]
Message-ID: <20190123163339.17506-1-codrin.ciubotariu@microchip.com> (raw)

From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>

atchan->status variable is used to store two different information:
 - pass channel interrupts status from interrupt handler to tasklet;
 - channel information like whether it is cyclic or paused;

This causes a bug when device_terminate_all() is called,
(AT_XDMAC_CHAN_IS_CYCLIC cleared on atchan->status) and then a late End
of Block interrupt arrives (AT_XDMAC_CIS_BIS), which sets bit 0 of
atchan->status. Bit 0 is also used for AT_XDMAC_CHAN_IS_CYCLIC, so when
a new descriptor for a cyclic transfer is created, the driver reports
the channel as in use:

if (test_and_set_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status)) {
	dev_err(chan2dev(chan), "channel currently used\n");
	return NULL;
}

This patch fixes the bug by adding a different struct member to keep
the interrupts status separated from the channel status bits.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
---
 drivers/dma/at_xdmac.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index 4e557684f792..fe69dccfa0c0 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -203,6 +203,7 @@ struct at_xdmac_chan {
 	u32				save_cim;
 	u32				save_cnda;
 	u32				save_cndc;
+	u32				irq_status;
 	unsigned long			status;
 	struct tasklet_struct		tasklet;
 	struct dma_slave_config		sconfig;
@@ -1580,8 +1581,8 @@ static void at_xdmac_tasklet(unsigned long data)
 	struct at_xdmac_desc	*desc;
 	u32			error_mask;
 
-	dev_dbg(chan2dev(&atchan->chan), "%s: status=0x%08lx\n",
-		 __func__, atchan->status);
+	dev_dbg(chan2dev(&atchan->chan), "%s: status=0x%08x\n",
+		__func__, atchan->irq_status);
 
 	error_mask = AT_XDMAC_CIS_RBEIS
 		     | AT_XDMAC_CIS_WBEIS
@@ -1589,15 +1590,15 @@ static void at_xdmac_tasklet(unsigned long data)
 
 	if (at_xdmac_chan_is_cyclic(atchan)) {
 		at_xdmac_handle_cyclic(atchan);
-	} else if ((atchan->status & AT_XDMAC_CIS_LIS)
-		   || (atchan->status & error_mask)) {
+	} else if ((atchan->irq_status & AT_XDMAC_CIS_LIS)
+		   || (atchan->irq_status & error_mask)) {
 		struct dma_async_tx_descriptor  *txd;
 
-		if (atchan->status & AT_XDMAC_CIS_RBEIS)
+		if (atchan->irq_status & AT_XDMAC_CIS_RBEIS)
 			dev_err(chan2dev(&atchan->chan), "read bus error!!!");
-		if (atchan->status & AT_XDMAC_CIS_WBEIS)
+		if (atchan->irq_status & AT_XDMAC_CIS_WBEIS)
 			dev_err(chan2dev(&atchan->chan), "write bus error!!!");
-		if (atchan->status & AT_XDMAC_CIS_ROIS)
+		if (atchan->irq_status & AT_XDMAC_CIS_ROIS)
 			dev_err(chan2dev(&atchan->chan), "request overflow error!!!");
 
 		spin_lock(&atchan->lock);
@@ -1652,7 +1653,7 @@ static irqreturn_t at_xdmac_interrupt(int irq, void *dev_id)
 			atchan = &atxdmac->chan[i];
 			chan_imr = at_xdmac_chan_read(atchan, AT_XDMAC_CIM);
 			chan_status = at_xdmac_chan_read(atchan, AT_XDMAC_CIS);
-			atchan->status = chan_status & chan_imr;
+			atchan->irq_status = chan_status & chan_imr;
 			dev_vdbg(atxdmac->dma.dev,
 				 "%s: chan%d: imr=0x%x, status=0x%x\n",
 				 __func__, i, chan_imr, chan_status);
@@ -1666,7 +1667,7 @@ static irqreturn_t at_xdmac_interrupt(int irq, void *dev_id)
 				 at_xdmac_chan_read(atchan, AT_XDMAC_CDA),
 				 at_xdmac_chan_read(atchan, AT_XDMAC_CUBC));
 
-			if (atchan->status & (AT_XDMAC_CIS_RBEIS | AT_XDMAC_CIS_WBEIS))
+			if (atchan->irq_status & (AT_XDMAC_CIS_RBEIS | AT_XDMAC_CIS_WBEIS))
 				at_xdmac_write(atxdmac, AT_XDMAC_GD, atchan->mask);
 
 			tasklet_schedule(&atchan->tasklet);
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2019-01-23 16:33 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-23 16:33 Codrin Ciubotariu [this message]
2019-01-23 16:33 ` [PATCH v2] dmaengine: at_xdmac: Fix wrongfull report of a channel as in use Codrin.Ciubotariu
2019-01-23 16:33 ` Codrin.Ciubotariu
2019-01-23 16:41 [v2] " Codrin Ciubotariu
2019-01-23 16:41 ` [PATCH v2] " Codrin.Ciubotariu
2019-01-23 16:41 ` Codrin.Ciubotariu
2019-02-02 10:25 [v2] " Vinod Koul
2019-02-02 10:25 ` [PATCH v2] " Vinod Koul
2019-02-02 10:25 ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190123163339.17506-1-codrin.ciubotariu@microchip.com \
    --to=codrin.ciubotariu@microchip.com \
    --cc=Ludovic.Desroches@microchip.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.