From: Anand Moon <linux.amoon@gmail.com>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
Kevin Hilman <khilman@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCHv3 1/2] ARM64: dts: meson-gxbb-odroidc2: Fix usb phy reset warning
Date: Tue, 29 Jan 2019 10:25:20 +0000 [thread overview]
Message-ID: <20190129102521.4141-2-linux.amoon@gmail.com> (raw)
In-Reply-To: <20190129102521.4141-1-linux.amoon@gmail.com>
Add missing vin-supply node 5.0V regulator setting to power
to usb ports, changes help fix the usb reset warning.
[ 795.380156] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[ 798.356073] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[ 801.331999] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[ 804.307919] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[ 807.283844] usb 1-1.2: reset high-speed USB device number 3 using dwc2
Fixes: 5a0803bd5ae (ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes)
Tested-by: Kevin Hilman <khilman@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
changes from prevoius
regulator use open bypass opmode voltage current min max
---------------------------------------------------------------------------------------
regulator-dummy 5 4 0 unknown 0mV 0mA 0mV 0mV
c9100000.usb 1 0mA 0mV 0mV
c9100000.usb 1 0mA 0mV 0mV
c9000000.usb 1 0mA 0mV 0mV
c9000000.usb 1 0mA 0mV 0mV
P5V0 1 1 0 unknown 5000mV 0mA 5000mV 5000mV
USB_OTG_PWR 4 2 0 unknown 5000mV 0mA 5000mV 5000mV
phy-c0000020.phy.1 2 0mA 0mV 0mV
phy-c0000000.phy.0 2 0mA 0mV 0mV
--
---
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 2e1cd5e3a246..da729ed00408 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -28,6 +28,13 @@
reg = <0x0 0x0 0x0 0x80000000>;
};
+ p5v0: regulator-p5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "P5V0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
usb_otg_pwr: regulator-usb-pwrs {
compatible = "regulator-fixed";
@@ -36,6 +43,8 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ vin-supply = <&p5v0>;
+
gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
--
2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <linux.amoon@gmail.com>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Kevin Hilman <khilman@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCHv3 1/2] ARM64: dts: meson-gxbb-odroidc2: Fix usb phy reset warning
Date: Tue, 29 Jan 2019 10:25:20 +0000 [thread overview]
Message-ID: <20190129102521.4141-2-linux.amoon@gmail.com> (raw)
In-Reply-To: <20190129102521.4141-1-linux.amoon@gmail.com>
Add missing vin-supply node 5.0V regulator setting to power
to usb ports, changes help fix the usb reset warning.
[ 795.380156] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[ 798.356073] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[ 801.331999] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[ 804.307919] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[ 807.283844] usb 1-1.2: reset high-speed USB device number 3 using dwc2
Fixes: 5a0803bd5ae (ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes)
Tested-by: Kevin Hilman <khilman@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
changes from prevoius
regulator use open bypass opmode voltage current min max
---------------------------------------------------------------------------------------
regulator-dummy 5 4 0 unknown 0mV 0mA 0mV 0mV
c9100000.usb 1 0mA 0mV 0mV
c9100000.usb 1 0mA 0mV 0mV
c9000000.usb 1 0mA 0mV 0mV
c9000000.usb 1 0mA 0mV 0mV
P5V0 1 1 0 unknown 5000mV 0mA 5000mV 5000mV
USB_OTG_PWR 4 2 0 unknown 5000mV 0mA 5000mV 5000mV
phy-c0000020.phy.1 2 0mA 0mV 0mV
phy-c0000000.phy.0 2 0mA 0mV 0mV
--
---
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 2e1cd5e3a246..da729ed00408 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -28,6 +28,13 @@
reg = <0x0 0x0 0x0 0x80000000>;
};
+ p5v0: regulator-p5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "P5V0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
usb_otg_pwr: regulator-usb-pwrs {
compatible = "regulator-fixed";
@@ -36,6 +43,8 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ vin-supply = <&p5v0>;
+
gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <linux.amoon@gmail.com>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Kevin Hilman <khilman@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCHv3 1/2] ARM64: dts: meson-gxbb-odroidc2: Fix usb phy reset warning
Date: Tue, 29 Jan 2019 10:25:20 +0000 [thread overview]
Message-ID: <20190129102521.4141-2-linux.amoon@gmail.com> (raw)
In-Reply-To: <20190129102521.4141-1-linux.amoon@gmail.com>
Add missing vin-supply node 5.0V regulator setting to power
to usb ports, changes help fix the usb reset warning.
[ 795.380156] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[ 798.356073] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[ 801.331999] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[ 804.307919] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[ 807.283844] usb 1-1.2: reset high-speed USB device number 3 using dwc2
Fixes: 5a0803bd5ae (ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes)
Tested-by: Kevin Hilman <khilman@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
changes from prevoius
regulator use open bypass opmode voltage current min max
---------------------------------------------------------------------------------------
regulator-dummy 5 4 0 unknown 0mV 0mA 0mV 0mV
c9100000.usb 1 0mA 0mV 0mV
c9100000.usb 1 0mA 0mV 0mV
c9000000.usb 1 0mA 0mV 0mV
c9000000.usb 1 0mA 0mV 0mV
P5V0 1 1 0 unknown 5000mV 0mA 5000mV 5000mV
USB_OTG_PWR 4 2 0 unknown 5000mV 0mA 5000mV 5000mV
phy-c0000020.phy.1 2 0mA 0mV 0mV
phy-c0000000.phy.0 2 0mA 0mV 0mV
--
---
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 2e1cd5e3a246..da729ed00408 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -28,6 +28,13 @@
reg = <0x0 0x0 0x0 0x80000000>;
};
+ p5v0: regulator-p5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "P5V0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
usb_otg_pwr: regulator-usb-pwrs {
compatible = "regulator-fixed";
@@ -36,6 +43,8 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ vin-supply = <&p5v0>;
+
gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
--
2.20.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-01-29 10:25 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-29 10:25 [PATCHv3 0/2] Odroid c2 usb fixs Anand Moon
2019-01-29 10:25 ` Anand Moon
2019-01-29 10:25 ` Anand Moon
2019-01-29 10:25 ` Anand Moon [this message]
2019-01-29 10:25 ` [PATCHv3 1/2] ARM64: dts: meson-gxbb-odroidc2: Fix usb phy reset warning Anand Moon
2019-01-29 10:25 ` Anand Moon
2019-02-04 13:58 ` Martin Blumenstingl
2019-02-04 13:58 ` Martin Blumenstingl
2019-02-04 13:58 ` Martin Blumenstingl
2019-02-04 20:04 ` Anand Moon
2019-02-04 20:04 ` Anand Moon
2019-02-04 20:04 ` Anand Moon
2019-02-04 20:49 ` Martin Blumenstingl
2019-02-04 20:49 ` Martin Blumenstingl
2019-02-04 20:49 ` Martin Blumenstingl
2019-02-05 19:53 ` Anand Moon
2019-02-05 19:53 ` Anand Moon
2019-02-05 19:53 ` Anand Moon
2019-01-29 10:25 ` [PATCHv3 2/2] ARM64: dts: meson-gxbb-odroidc2: Fix usb phy regulator power failed warning Anand Moon
2019-01-29 10:25 ` Anand Moon
2019-01-29 10:25 ` Anand Moon
2019-02-04 14:06 ` Martin Blumenstingl
2019-02-04 14:06 ` Martin Blumenstingl
2019-02-04 14:06 ` Martin Blumenstingl
2019-02-04 20:05 ` Anand Moon
2019-02-04 20:05 ` Anand Moon
2019-02-04 20:05 ` Anand Moon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190129102521.4141-2-linux.amoon@gmail.com \
--to=linux.amoon@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.