From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> To: andy.gross@linaro.org Cc: devicetree@vger.kernel.org, Archit Taneja <architt@codeaurora.org>, linux-arm-msm@vger.kernel.org, Srinivas Kandagatla <srinivas.kandagatla@linaro.org>, Vivek Gautam <vivek.gautam@codeaurora.org>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/6] arm64: qcom: msm8996.dtsi: Add Display nodes Date: Tue, 29 Jan 2019 13:23:32 +0000 [thread overview] Message-ID: <20190129132335.30695-4-srinivas.kandagatla@linaro.org> (raw) In-Reply-To: <20190129132335.30695-1-srinivas.kandagatla@linaro.org> From: Archit Taneja <architt@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> [Removed instances of mmagic clocks; Use qcom,msm8996-smmu-v2 bindings] Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 120 ++++++++++++++++++++++++++ 1 file changed, 120 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 96adda520bd5..0d0b9482aa4d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1337,6 +1337,126 @@ "bus_slave"; }; }; + + mdss: mdss@900000 { + compatible = "qcom,mdss"; + + reg = <0x900000 0x1000>, + <0x9b0000 0x1040>, + <0x9b8000 0x1040>; + reg-names = "mdss_phys", + "vbif_phys", + "vbif_nrt_phys"; + + power-domains = <&mmcc MDSS_GDSC>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&mmcc MDSS_AHB_CLK>; + clock-names = "iface_clk"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mdp: mdp@901000 { + compatible = "qcom,mdp5"; + reg = <0x901000 0x90000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc SMMU_MDP_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface_clk", + "bus_clk", + "core_clk", + "iommu_clk", + "vsync_clk"; + + iommus = <&mdp_smmu 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf3_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + + hdmi: hdmi-tx@9a0000 { + compatible = "qcom,hdmi-tx-8996"; + reg = <0x009a0000 0x50c>, + <0x00070000 0x6158>, + <0x009e0000 0xfff>; + reg-names = "core_physical", + "qfprom_physical", + "hdcp_physical"; + + interrupt-parent = <&mdss>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_HDMI_CLK>, + <&mmcc MDSS_HDMI_AHB_CLK>, + <&mmcc MDSS_EXTPCLK_CLK>; + clock-names = + "mdp_core_clk", + "iface_clk", + "core_clk", + "alt_iface_clk", + "extp_clk"; + + phys = <&hdmi_phy>; + phy-names = "hdmi_phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + hdmi_in: endpoint { + remote-endpoint = <&mdp5_intf3_out>; + }; + }; + }; + }; + + hdmi_phy: hdmi-phy@9a0600 { + #phy-cells = <0>; + compatible = "qcom,hdmi-phy-8996"; + reg = <0x9a0600 0x1c4>, + <0x9a0a00 0x124>, + <0x9a0c00 0x124>, + <0x9a0e00 0x124>, + <0x9a1000 0x124>, + <0x9a1200 0x0c8>; + reg-names = "hdmi_pll", + "hdmi_tx_l0", + "hdmi_tx_l1", + "hdmi_tx_l2", + "hdmi_tx_l3", + "hdmi_phy"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&gcc GCC_HDMI_CLKREF_CLK>; + clock-names = "iface_clk", + "ref_clk"; + }; + }; }; adsp-pil { -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> To: andy.gross@linaro.org Cc: devicetree@vger.kernel.org, Archit Taneja <architt@codeaurora.org>, linux-arm-msm@vger.kernel.org, Srinivas Kandagatla <srinivas.kandagatla@linaro.org>, Vivek Gautam <vivek.gautam@codeaurora.org>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/6] arm64: qcom: msm8996.dtsi: Add Display nodes Date: Tue, 29 Jan 2019 13:23:32 +0000 [thread overview] Message-ID: <20190129132335.30695-4-srinivas.kandagatla@linaro.org> (raw) In-Reply-To: <20190129132335.30695-1-srinivas.kandagatla@linaro.org> From: Archit Taneja <architt@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> [Removed instances of mmagic clocks; Use qcom,msm8996-smmu-v2 bindings] Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 120 ++++++++++++++++++++++++++ 1 file changed, 120 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 96adda520bd5..0d0b9482aa4d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1337,6 +1337,126 @@ "bus_slave"; }; }; + + mdss: mdss@900000 { + compatible = "qcom,mdss"; + + reg = <0x900000 0x1000>, + <0x9b0000 0x1040>, + <0x9b8000 0x1040>; + reg-names = "mdss_phys", + "vbif_phys", + "vbif_nrt_phys"; + + power-domains = <&mmcc MDSS_GDSC>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&mmcc MDSS_AHB_CLK>; + clock-names = "iface_clk"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mdp: mdp@901000 { + compatible = "qcom,mdp5"; + reg = <0x901000 0x90000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc SMMU_MDP_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface_clk", + "bus_clk", + "core_clk", + "iommu_clk", + "vsync_clk"; + + iommus = <&mdp_smmu 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf3_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + + hdmi: hdmi-tx@9a0000 { + compatible = "qcom,hdmi-tx-8996"; + reg = <0x009a0000 0x50c>, + <0x00070000 0x6158>, + <0x009e0000 0xfff>; + reg-names = "core_physical", + "qfprom_physical", + "hdcp_physical"; + + interrupt-parent = <&mdss>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_HDMI_CLK>, + <&mmcc MDSS_HDMI_AHB_CLK>, + <&mmcc MDSS_EXTPCLK_CLK>; + clock-names = + "mdp_core_clk", + "iface_clk", + "core_clk", + "alt_iface_clk", + "extp_clk"; + + phys = <&hdmi_phy>; + phy-names = "hdmi_phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + hdmi_in: endpoint { + remote-endpoint = <&mdp5_intf3_out>; + }; + }; + }; + }; + + hdmi_phy: hdmi-phy@9a0600 { + #phy-cells = <0>; + compatible = "qcom,hdmi-phy-8996"; + reg = <0x9a0600 0x1c4>, + <0x9a0a00 0x124>, + <0x9a0c00 0x124>, + <0x9a0e00 0x124>, + <0x9a1000 0x124>, + <0x9a1200 0x0c8>; + reg-names = "hdmi_pll", + "hdmi_tx_l0", + "hdmi_tx_l1", + "hdmi_tx_l2", + "hdmi_tx_l3", + "hdmi_phy"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&gcc GCC_HDMI_CLKREF_CLK>; + clock-names = "iface_clk", + "ref_clk"; + }; + }; }; adsp-pil { -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-01-29 13:23 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-01-29 13:23 [PATCH 0/6] arm64: dts: DB820c: Add display and audio support Srinivas Kandagatla 2019-01-29 13:23 ` Srinivas Kandagatla 2019-01-29 13:23 ` [PATCH 1/6] arm64: dts: msm8996: Add graphics smmu node Srinivas Kandagatla 2019-01-29 13:23 ` Srinivas Kandagatla 2019-01-29 13:23 ` [PATCH 2/6] arm64: dts: msm8996: Add display " Srinivas Kandagatla 2019-01-29 13:23 ` Srinivas Kandagatla 2019-01-29 13:23 ` Srinivas Kandagatla [this message] 2019-01-29 13:23 ` [PATCH 3/6] arm64: qcom: msm8996.dtsi: Add Display nodes Srinivas Kandagatla 2019-01-29 13:23 ` [PATCH 4/6] arm64: dts: Add Adreno GPU and GPU smmu definitions Srinivas Kandagatla 2019-01-29 13:23 ` Srinivas Kandagatla 2019-01-29 16:04 ` Jordan Crouse 2019-01-29 16:04 ` Jordan Crouse 2019-01-29 16:43 ` Jordan Crouse 2019-01-29 16:43 ` Jordan Crouse 2019-01-29 17:46 ` Srinivas Kandagatla 2019-01-29 17:46 ` Srinivas Kandagatla 2019-01-29 23:58 ` [PATCH] " Jordan Crouse 2019-01-29 23:58 ` Jordan Crouse 2019-01-30 5:32 ` Vivek Gautam 2019-01-30 5:32 ` Vivek Gautam 2019-01-30 10:54 ` Srinivas Kandagatla 2019-01-30 10:54 ` Srinivas Kandagatla 2019-01-29 13:23 ` [PATCH 5/6] arm64: dts: apq8096-db820c: Add HDMI display support Srinivas Kandagatla 2019-01-29 13:23 ` Srinivas Kandagatla 2019-01-29 13:23 ` [PATCH 6/6] arm64: dts: db820c: Add sound card support Srinivas Kandagatla 2019-01-29 13:23 ` Srinivas Kandagatla
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190129132335.30695-4-srinivas.kandagatla@linaro.org \ --to=srinivas.kandagatla@linaro.org \ --cc=andy.gross@linaro.org \ --cc=architt@codeaurora.org \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=vivek.gautam@codeaurora.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.