All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Andy Gross <andy.gross@linaro.org>, David Brown <david.brown@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Ohad Ben-Cohen <ohad@wizery.com>,
	Arun Kumar Neelakantam <aneela@codeaurora.org>,
	Sibi Sankar <sibis@codeaurora.org>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-remoteproc@vger.kernel.org
Subject: [PATCH v4 04/10] dt-bindings: soc: qcom: Add AOSS QMP binding
Date: Tue, 29 Jan 2019 15:20:03 -0800	[thread overview]
Message-ID: <20190129232009.5033-5-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20190129232009.5033-1-bjorn.andersson@linaro.org>

Add binding for the QMP based side-channel communication mechanism to
the AOSS, which is used to control resources not exposed through the
RPMh interface.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v3:
- Spelled out QMP

 .../bindings/soc/qcom/qcom,aoss-qmp.txt       | 76 +++++++++++++++++++
 include/dt-bindings/power/qcom-aoss-qmp.h     | 15 ++++
 2 files changed, 91 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
 create mode 100644 include/dt-bindings/power/qcom-aoss-qmp.h

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
new file mode 100644
index 000000000000..9ce6c42192ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
@@ -0,0 +1,76 @@
+Qualcomm Always-On Subsystem side channel binding
+
+This binding describes the hardware component responsible for side channel
+requests to the always-on subsystem (AOSS), used for certain power management
+requests that is not handled by the standard RPMh interface. Each client in the
+SoC has it's own block of message RAM and IRQ for communication with the AOSS.
+The protocol used to communicate in the message RAM is known as Qualcomm
+Messagin Protocol (QMP)
+
+The AOSS side channel exposes control over a set of resources, used to control
+a set of debug related clocks and to affect the low power state of resources
+related to the secondary subsystems. These resources are exposed as a set of
+power-domains.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be "qcom,sdm845-aoss-qmp"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the base address and size of the message RAM for this
+		    client's communication with the AOSS
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the AOSS message IRQ for this client
+
+- mboxes:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: reference to the mailbox representing the outgoing doorbell
+		    in APCS for this client, as described in mailbox/mailbox.txt
+
+- #power-domain-cells:
+	Usage: optional
+	Value type: <u32>
+	Definition: must be 1
+		    The provided power-domains are:
+		    QDSS clock-domain (0), CDSP state (1), LPASS state (2),
+		    modem state (3), SLPI state (4), SPSS state (5) and Venus
+		    state (6).
+
+= SUBNODES
+The AOSS side channel also provides the controls for three cooling devices,
+these are expressed as subnodes of the QMP node. The name of the node is used
+to identify the resource and must therefor be "cx", "mx" or "ebi".
+
+- #cooling-cells:
+	Usage: optional
+	Value type: <u32>
+	Definition: must be 2
+
+= EXAMPLE
+
+The following example represents the AOSS side-channel message RAM and the
+mechanism exposing the power-domains, as found in SDM845.
+
+  aoss_qmp: qmp@c300000 {
+	  compatible = "qcom,sdm845-aoss-qmp";
+	  reg = <0x0c300000 0x100000>;
+	  interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+	  mboxes = <&apss_shared 0>;
+
+	  #power-domain-cells = <1>;
+
+	  cx_cdev: cx {
+		#cooling-cells = <2>;
+	  };
+
+	  mx_cdev: mx {
+		#cooling-cells = <2>;
+	  };
+  };
diff --git a/include/dt-bindings/power/qcom-aoss-qmp.h b/include/dt-bindings/power/qcom-aoss-qmp.h
new file mode 100644
index 000000000000..7d8ac1a4f90c
--- /dev/null
+++ b/include/dt-bindings/power/qcom-aoss-qmp.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018, Linaro Ltd. */
+
+#ifndef __DT_BINDINGS_POWER_QCOM_AOSS_QMP_H
+#define __DT_BINDINGS_POWER_QCOM_AOSS_QMP_H
+
+#define AOSS_QMP_QDSS_CLK	0
+#define AOSS_QMP_LS_CDSP		1
+#define AOSS_QMP_LS_LPASS	2
+#define AOSS_QMP_LS_MODEM	3
+#define AOSS_QMP_LS_SLPI		4
+#define AOSS_QMP_LS_SPSS		5
+#define AOSS_QMP_LS_VENUS	6
+
+#endif
-- 
2.18.0

  parent reply	other threads:[~2019-01-29 23:20 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-29 23:19 [PATCH v4 00/10] Qualcomm AOSS QMP driver and modem dts Bjorn Andersson
2019-01-29 23:20 ` [PATCH v4 01/10] arm64: dts: qcom: sdm845: Update reserved memory map Bjorn Andersson
2019-01-29 23:20 ` [PATCH v4 02/10] arm64: dts: qcom: sdm845: Define rmtfs memory Bjorn Andersson
2019-01-30  6:47   ` Bjorn Andersson
2019-01-29 23:20 ` [PATCH v4 03/10] arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes Bjorn Andersson
2019-01-29 23:20 ` Bjorn Andersson [this message]
2019-01-29 23:20 ` [PATCH v4 05/10] soc: qcom: Add AOSS QMP communication driver Bjorn Andersson
2019-01-29 23:20 ` [PATCH v4 06/10] soc: qcom: Add AOSS QMP genpd provider Bjorn Andersson
2019-01-29 23:20 ` [PATCH v4 07/10] remoteproc: q6v5-mss: Vote for rpmh power domains Bjorn Andersson
2019-01-29 23:20 ` [PATCH v4 08/10] remoteproc: q6v5-mss: Active powerdomain for SDM845 Bjorn Andersson
2019-01-29 23:20 ` [PATCH v4 09/10] arm64: dts: qcom: Add AOSS QMP node Bjorn Andersson
2019-01-29 23:20 ` [PATCH v4 10/10] arm64: dts: qcom: sdm845: Add Q6V5 MSS node Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190129232009.5033-5-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=andy.gross@linaro.org \
    --cc=aneela@codeaurora.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=ohad@wizery.com \
    --cc=robh+dt@kernel.org \
    --cc=sibis@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.