From: Chen-Yu Tsai <wens@csie.org>
To: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: linux-sunxi@googlegroups.com, Icenowy Zheng <icenowy@aosc.io>,
Andre Przywara <andre.przywara@arm.com>,
Emmanuel Vadot <manu@freebsd.org>,
Jagan Teki <jagan@amarulasolutions.com>,
Sergey Matyukevich <geomatsi@gmail.com>,
Hauke Mehrtens <hauke@hauke-m.de>, Chen-Yu Tsai <wens@csie.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 00/10] arm64: dts: allwinner: h5: Enable CPU DVFS (cpufreq)
Date: Wed, 30 Jan 2019 16:41:53 +0800 [thread overview]
Message-ID: <20190130084203.25053-1-wens@csie.org> (raw)
Hi everyone,
This series enables DVFS for the CPU cores (aka cpufreq) on the
Allwinner H5 SoC. The OPP table was taken from Armbian, with minor
tweaks to the maximum voltage to account for slightly increased voltage
on some of the boards.
This has been tested on the Bananapi M2+ v1.2 and Libre Computer
ALL-H3-CC H5 ver.. I do not have the remaining boards so I've CC-ed
people who did the original submission or have modified the board
specifically later on.
Patch 1 fixes the voltages specified for the GPIO-controlled regulator
on the Bananapi M2+ v1.2. The voltages are slightly higher than what
was originally written.
Patch 2 adds a fixed regulator for the CPU on the original Bananapi M2+.
This is for the retail version, not the engineering samples that had an
even higher voltage setting.
Patch 3 hooks up the CPU regulator supply for H5 boards that already
define the regulator, but were missing the property to tie it to the
CPUs.
Patch 4 ~ 8 adds the CPU regulator for boards that don't have it
defined. This is based on each vendor's schematics. I need people
to test each of these specifically and the whole series.
Patch 9 ties the CPU clock to the CPU cores.
Patch 10 adds the OPP table, based on the one from Armbian.
Please have a look and please help test this.
Regards
ChenYu
Chen-Yu Tsai (10):
ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages
ARM: dts: bananapi-m2-plus: Add CPU supply regulator
arm64: dts: allwinner: h5: Hook up cpu regulator supplies
arm64: dts: allwinner: h5: nanopi-neo2: Add CPU regulator supply
arm64: dts: allwinner: h5: orange-pi-zero-plus: Add CPU regulator
supply
arm64: dts: allwinner: h5: orange-pi-zero-plus2: Add CPU regulator
supply
arm64: dts: allwinner: h5: orange-pi-pc2: Add CPU regulator supply
arm64: dts: allwinner: h5: orange-pi-prime: Add CPU regulator supply
arm64: dts: allwinner: h5: Add clock to CPU cores
arm64: dts: allwinner: h5: Add CPU Operating Performance Points table
.../boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi | 30 +++-----
arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi | 14 ++++
.../sun50i-h5-emlid-neutis-n5-devboard.dts | 4 +
.../allwinner/sun50i-h5-nanopi-neo-plus2.dts | 4 +
.../dts/allwinner/sun50i-h5-nanopi-neo2.dts | 20 +++++
.../dts/allwinner/sun50i-h5-orangepi-pc2.dts | 28 +++++++
.../allwinner/sun50i-h5-orangepi-prime.dts | 28 +++++++
.../sun50i-h5-orangepi-zero-plus.dts | 20 +++++
.../sun50i-h5-orangepi-zero-plus2.dts | 20 +++++
arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 75 +++++++++++++++++++
10 files changed, 224 insertions(+), 19 deletions(-)
--
2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
To: Maxime Ripard <maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>
Cc: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>,
Andre Przywara <andre.przywara-5wv7dgnIgG8@public.gmane.org>,
Emmanuel Vadot <manu-h+KGxgPPiopAfugRpC6u6w@public.gmane.org>,
Jagan Teki
<jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>,
Sergey Matyukevich
<geomatsi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Hauke Mehrtens <hauke-5/S+JYg5SzeELgA04lAiVw@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 00/10] arm64: dts: allwinner: h5: Enable CPU DVFS (cpufreq)
Date: Wed, 30 Jan 2019 16:41:53 +0800 [thread overview]
Message-ID: <20190130084203.25053-1-wens@csie.org> (raw)
Hi everyone,
This series enables DVFS for the CPU cores (aka cpufreq) on the
Allwinner H5 SoC. The OPP table was taken from Armbian, with minor
tweaks to the maximum voltage to account for slightly increased voltage
on some of the boards.
This has been tested on the Bananapi M2+ v1.2 and Libre Computer
ALL-H3-CC H5 ver.. I do not have the remaining boards so I've CC-ed
people who did the original submission or have modified the board
specifically later on.
Patch 1 fixes the voltages specified for the GPIO-controlled regulator
on the Bananapi M2+ v1.2. The voltages are slightly higher than what
was originally written.
Patch 2 adds a fixed regulator for the CPU on the original Bananapi M2+.
This is for the retail version, not the engineering samples that had an
even higher voltage setting.
Patch 3 hooks up the CPU regulator supply for H5 boards that already
define the regulator, but were missing the property to tie it to the
CPUs.
Patch 4 ~ 8 adds the CPU regulator for boards that don't have it
defined. This is based on each vendor's schematics. I need people
to test each of these specifically and the whole series.
Patch 9 ties the CPU clock to the CPU cores.
Patch 10 adds the OPP table, based on the one from Armbian.
Please have a look and please help test this.
Regards
ChenYu
Chen-Yu Tsai (10):
ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages
ARM: dts: bananapi-m2-plus: Add CPU supply regulator
arm64: dts: allwinner: h5: Hook up cpu regulator supplies
arm64: dts: allwinner: h5: nanopi-neo2: Add CPU regulator supply
arm64: dts: allwinner: h5: orange-pi-zero-plus: Add CPU regulator
supply
arm64: dts: allwinner: h5: orange-pi-zero-plus2: Add CPU regulator
supply
arm64: dts: allwinner: h5: orange-pi-pc2: Add CPU regulator supply
arm64: dts: allwinner: h5: orange-pi-prime: Add CPU regulator supply
arm64: dts: allwinner: h5: Add clock to CPU cores
arm64: dts: allwinner: h5: Add CPU Operating Performance Points table
.../boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi | 30 +++-----
arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi | 14 ++++
.../sun50i-h5-emlid-neutis-n5-devboard.dts | 4 +
.../allwinner/sun50i-h5-nanopi-neo-plus2.dts | 4 +
.../dts/allwinner/sun50i-h5-nanopi-neo2.dts | 20 +++++
.../dts/allwinner/sun50i-h5-orangepi-pc2.dts | 28 +++++++
.../allwinner/sun50i-h5-orangepi-prime.dts | 28 +++++++
.../sun50i-h5-orangepi-zero-plus.dts | 20 +++++
.../sun50i-h5-orangepi-zero-plus2.dts | 20 +++++
arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 75 +++++++++++++++++++
10 files changed, 224 insertions(+), 19 deletions(-)
--
2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens@csie.org>
To: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: devicetree@vger.kernel.org,
Sergey Matyukevich <geomatsi@gmail.com>,
Andre Przywara <andre.przywara@arm.com>,
Chen-Yu Tsai <wens@csie.org>,
linux-kernel@vger.kernel.org, Emmanuel Vadot <manu@freebsd.org>,
linux-sunxi@googlegroups.com,
Jagan Teki <jagan@amarulasolutions.com>,
Hauke Mehrtens <hauke@hauke-m.de>,
linux-arm-kernel@lists.infradead.org,
Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH 00/10] arm64: dts: allwinner: h5: Enable CPU DVFS (cpufreq)
Date: Wed, 30 Jan 2019 16:41:53 +0800 [thread overview]
Message-ID: <20190130084203.25053-1-wens@csie.org> (raw)
Hi everyone,
This series enables DVFS for the CPU cores (aka cpufreq) on the
Allwinner H5 SoC. The OPP table was taken from Armbian, with minor
tweaks to the maximum voltage to account for slightly increased voltage
on some of the boards.
This has been tested on the Bananapi M2+ v1.2 and Libre Computer
ALL-H3-CC H5 ver.. I do not have the remaining boards so I've CC-ed
people who did the original submission or have modified the board
specifically later on.
Patch 1 fixes the voltages specified for the GPIO-controlled regulator
on the Bananapi M2+ v1.2. The voltages are slightly higher than what
was originally written.
Patch 2 adds a fixed regulator for the CPU on the original Bananapi M2+.
This is for the retail version, not the engineering samples that had an
even higher voltage setting.
Patch 3 hooks up the CPU regulator supply for H5 boards that already
define the regulator, but were missing the property to tie it to the
CPUs.
Patch 4 ~ 8 adds the CPU regulator for boards that don't have it
defined. This is based on each vendor's schematics. I need people
to test each of these specifically and the whole series.
Patch 9 ties the CPU clock to the CPU cores.
Patch 10 adds the OPP table, based on the one from Armbian.
Please have a look and please help test this.
Regards
ChenYu
Chen-Yu Tsai (10):
ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages
ARM: dts: bananapi-m2-plus: Add CPU supply regulator
arm64: dts: allwinner: h5: Hook up cpu regulator supplies
arm64: dts: allwinner: h5: nanopi-neo2: Add CPU regulator supply
arm64: dts: allwinner: h5: orange-pi-zero-plus: Add CPU regulator
supply
arm64: dts: allwinner: h5: orange-pi-zero-plus2: Add CPU regulator
supply
arm64: dts: allwinner: h5: orange-pi-pc2: Add CPU regulator supply
arm64: dts: allwinner: h5: orange-pi-prime: Add CPU regulator supply
arm64: dts: allwinner: h5: Add clock to CPU cores
arm64: dts: allwinner: h5: Add CPU Operating Performance Points table
.../boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi | 30 +++-----
arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi | 14 ++++
.../sun50i-h5-emlid-neutis-n5-devboard.dts | 4 +
.../allwinner/sun50i-h5-nanopi-neo-plus2.dts | 4 +
.../dts/allwinner/sun50i-h5-nanopi-neo2.dts | 20 +++++
.../dts/allwinner/sun50i-h5-orangepi-pc2.dts | 28 +++++++
.../allwinner/sun50i-h5-orangepi-prime.dts | 28 +++++++
.../sun50i-h5-orangepi-zero-plus.dts | 20 +++++
.../sun50i-h5-orangepi-zero-plus2.dts | 20 +++++
arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 75 +++++++++++++++++++
10 files changed, 224 insertions(+), 19 deletions(-)
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-01-30 8:42 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-30 8:41 Chen-Yu Tsai [this message]
2019-01-30 8:41 ` [PATCH 00/10] arm64: dts: allwinner: h5: Enable CPU DVFS (cpufreq) Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` [PATCH 01/10] ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` [PATCH 02/10] ARM: dts: bananapi-m2-plus: Add CPU supply regulator Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` [PATCH 03/10] arm64: dts: allwinner: h5: Hook up cpu regulator supplies Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` [PATCH 04/10] arm64: dts: allwinner: h5: nanopi-neo2: Add CPU regulator supply Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` [PATCH 05/10] arm64: dts: allwinner: h5: orange-pi-zero-plus: " Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` [PATCH 06/10] arm64: dts: allwinner: h5: orange-pi-zero-plus2: " Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:42 ` [PATCH 07/10] arm64: dts: allwinner: h5: orange-pi-pc2: " Chen-Yu Tsai
2019-01-30 8:42 ` Chen-Yu Tsai
2019-01-30 8:42 ` Chen-Yu Tsai
2019-01-30 8:42 ` [PATCH 08/10] arm64: dts: allwinner: h5: orange-pi-prime: " Chen-Yu Tsai
2019-01-30 8:42 ` Chen-Yu Tsai
2019-01-30 8:42 ` Chen-Yu Tsai
2019-01-30 8:42 ` [PATCH 09/10] arm64: dts: allwinner: h5: Add clock to CPU cores Chen-Yu Tsai
2019-01-30 8:42 ` Chen-Yu Tsai
2019-01-30 8:42 ` Chen-Yu Tsai
2019-01-30 8:42 ` [PATCH 10/10] arm64: dts: allwinner: h5: Add CPU Operating Performance Points table Chen-Yu Tsai
2019-01-30 8:42 ` Chen-Yu Tsai
2019-01-30 8:42 ` Chen-Yu Tsai
2019-01-30 9:29 ` Maxime Ripard
2019-01-30 9:29 ` Maxime Ripard
2019-01-30 9:29 ` Maxime Ripard
2019-01-30 9:41 ` Chen-Yu Tsai
2019-01-30 9:41 ` Chen-Yu Tsai
2019-01-30 9:59 ` Maxime Ripard
2019-01-30 9:59 ` Maxime Ripard
2019-01-30 9:59 ` Maxime Ripard
2019-01-31 3:28 ` Chen-Yu Tsai
2019-01-31 3:28 ` Chen-Yu Tsai
2019-01-31 3:28 ` Chen-Yu Tsai
2019-09-02 14:03 ` [PATCH 00/10] arm64: dts: allwinner: h5: Enable CPU DVFS (cpufreq) Ondřej Jirman
2019-09-02 14:03 ` Ondřej Jirman
2019-09-02 14:03 ` Ondřej Jirman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190130084203.25053-1-wens@csie.org \
--to=wens@csie.org \
--cc=andre.przywara@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=geomatsi@gmail.com \
--cc=hauke@hauke-m.de \
--cc=icenowy@aosc.io \
--cc=jagan@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=manu@freebsd.org \
--cc=maxime.ripard@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.