From: Chen-Yu Tsai <wens@csie.org>
To: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: linux-sunxi@googlegroups.com, Icenowy Zheng <icenowy@aosc.io>,
Andre Przywara <andre.przywara@arm.com>,
Emmanuel Vadot <manu@freebsd.org>,
Jagan Teki <jagan@amarulasolutions.com>,
Sergey Matyukevich <geomatsi@gmail.com>,
Hauke Mehrtens <hauke@hauke-m.de>, Chen-Yu Tsai <wens@csie.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 01/10] ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages
Date: Wed, 30 Jan 2019 16:41:54 +0800 [thread overview]
Message-ID: <20190130084203.25053-2-wens@csie.org> (raw)
In-Reply-To: <20190130084203.25053-1-wens@csie.org>
The Bananapi M2+ uses a GPIO line to change the effective resistance of
the CPU supply regulator's feedback resistor network. The voltages
described in the device tree were given directly by the vendor. This
turns out to be slightly off compared to the real values.
The updated voltages are based on calculations of the feedback resistor
network, and verified down to three decimal places with a multi-meter.
Fixes: 6eeb4180d4b9 ("ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
index 53edd1faee99..a567567763f4 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
@@ -16,13 +16,13 @@
regulator-type = "voltage";
regulator-boot-on;
regulator-always-on;
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1300000>;
+ regulator-min-microvolt = <1108475>;
+ regulator-max-microvolt = <1308475>;
regulator-ramp-delay = <50>; /* 4ms */
gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
gpios-states = <0x1>;
- states = <1100000 0x0
- 1300000 0x1>;
+ states = <1108475 0x0
+ 1308475 0x1>;
};
};
--
2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
To: Maxime Ripard <maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>
Cc: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>,
Andre Przywara <andre.przywara-5wv7dgnIgG8@public.gmane.org>,
Emmanuel Vadot <manu-h+KGxgPPiopAfugRpC6u6w@public.gmane.org>,
Jagan Teki
<jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>,
Sergey Matyukevich
<geomatsi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Hauke Mehrtens <hauke-5/S+JYg5SzeELgA04lAiVw@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 01/10] ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages
Date: Wed, 30 Jan 2019 16:41:54 +0800 [thread overview]
Message-ID: <20190130084203.25053-2-wens@csie.org> (raw)
In-Reply-To: <20190130084203.25053-1-wens-jdAy2FN1RRM@public.gmane.org>
The Bananapi M2+ uses a GPIO line to change the effective resistance of
the CPU supply regulator's feedback resistor network. The voltages
described in the device tree were given directly by the vendor. This
turns out to be slightly off compared to the real values.
The updated voltages are based on calculations of the feedback resistor
network, and verified down to three decimal places with a multi-meter.
Fixes: 6eeb4180d4b9 ("ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees")
Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
---
arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
index 53edd1faee99..a567567763f4 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
@@ -16,13 +16,13 @@
regulator-type = "voltage";
regulator-boot-on;
regulator-always-on;
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1300000>;
+ regulator-min-microvolt = <1108475>;
+ regulator-max-microvolt = <1308475>;
regulator-ramp-delay = <50>; /* 4ms */
gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
gpios-states = <0x1>;
- states = <1100000 0x0
- 1300000 0x1>;
+ states = <1108475 0x0
+ 1308475 0x1>;
};
};
--
2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens@csie.org>
To: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: devicetree@vger.kernel.org,
Sergey Matyukevich <geomatsi@gmail.com>,
Andre Przywara <andre.przywara@arm.com>,
Chen-Yu Tsai <wens@csie.org>,
linux-kernel@vger.kernel.org, Emmanuel Vadot <manu@freebsd.org>,
linux-sunxi@googlegroups.com,
Jagan Teki <jagan@amarulasolutions.com>,
Hauke Mehrtens <hauke@hauke-m.de>,
linux-arm-kernel@lists.infradead.org,
Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH 01/10] ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages
Date: Wed, 30 Jan 2019 16:41:54 +0800 [thread overview]
Message-ID: <20190130084203.25053-2-wens@csie.org> (raw)
In-Reply-To: <20190130084203.25053-1-wens@csie.org>
The Bananapi M2+ uses a GPIO line to change the effective resistance of
the CPU supply regulator's feedback resistor network. The voltages
described in the device tree were given directly by the vendor. This
turns out to be slightly off compared to the real values.
The updated voltages are based on calculations of the feedback resistor
network, and verified down to three decimal places with a multi-meter.
Fixes: 6eeb4180d4b9 ("ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
index 53edd1faee99..a567567763f4 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
@@ -16,13 +16,13 @@
regulator-type = "voltage";
regulator-boot-on;
regulator-always-on;
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1300000>;
+ regulator-min-microvolt = <1108475>;
+ regulator-max-microvolt = <1308475>;
regulator-ramp-delay = <50>; /* 4ms */
gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
gpios-states = <0x1>;
- states = <1100000 0x0
- 1300000 0x1>;
+ states = <1108475 0x0
+ 1308475 0x1>;
};
};
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-01-30 8:42 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-30 8:41 [PATCH 00/10] arm64: dts: allwinner: h5: Enable CPU DVFS (cpufreq) Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai [this message]
2019-01-30 8:41 ` [PATCH 01/10] ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` [PATCH 02/10] ARM: dts: bananapi-m2-plus: Add CPU supply regulator Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` [PATCH 03/10] arm64: dts: allwinner: h5: Hook up cpu regulator supplies Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` [PATCH 04/10] arm64: dts: allwinner: h5: nanopi-neo2: Add CPU regulator supply Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` [PATCH 05/10] arm64: dts: allwinner: h5: orange-pi-zero-plus: " Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` [PATCH 06/10] arm64: dts: allwinner: h5: orange-pi-zero-plus2: " Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:41 ` Chen-Yu Tsai
2019-01-30 8:42 ` [PATCH 07/10] arm64: dts: allwinner: h5: orange-pi-pc2: " Chen-Yu Tsai
2019-01-30 8:42 ` Chen-Yu Tsai
2019-01-30 8:42 ` Chen-Yu Tsai
2019-01-30 8:42 ` [PATCH 08/10] arm64: dts: allwinner: h5: orange-pi-prime: " Chen-Yu Tsai
2019-01-30 8:42 ` Chen-Yu Tsai
2019-01-30 8:42 ` Chen-Yu Tsai
2019-01-30 8:42 ` [PATCH 09/10] arm64: dts: allwinner: h5: Add clock to CPU cores Chen-Yu Tsai
2019-01-30 8:42 ` Chen-Yu Tsai
2019-01-30 8:42 ` Chen-Yu Tsai
2019-01-30 8:42 ` [PATCH 10/10] arm64: dts: allwinner: h5: Add CPU Operating Performance Points table Chen-Yu Tsai
2019-01-30 8:42 ` Chen-Yu Tsai
2019-01-30 8:42 ` Chen-Yu Tsai
2019-01-30 9:29 ` Maxime Ripard
2019-01-30 9:29 ` Maxime Ripard
2019-01-30 9:29 ` Maxime Ripard
2019-01-30 9:41 ` Chen-Yu Tsai
2019-01-30 9:41 ` Chen-Yu Tsai
2019-01-30 9:59 ` Maxime Ripard
2019-01-30 9:59 ` Maxime Ripard
2019-01-30 9:59 ` Maxime Ripard
2019-01-31 3:28 ` Chen-Yu Tsai
2019-01-31 3:28 ` Chen-Yu Tsai
2019-01-31 3:28 ` Chen-Yu Tsai
2019-09-02 14:03 ` [PATCH 00/10] arm64: dts: allwinner: h5: Enable CPU DVFS (cpufreq) Ondřej Jirman
2019-09-02 14:03 ` Ondřej Jirman
2019-09-02 14:03 ` Ondřej Jirman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190130084203.25053-2-wens@csie.org \
--to=wens@csie.org \
--cc=andre.przywara@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=geomatsi@gmail.com \
--cc=hauke@hauke-m.de \
--cc=icenowy@aosc.io \
--cc=jagan@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=manu@freebsd.org \
--cc=maxime.ripard@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.