[PATCH v2] i2c: gpio: merge two very similar comments

[Wolfram Sang <wsa+renesas@sang-engineering.com>]

I think it is clear enough if we have the explanation once and make it
clear it is applicable for both SCL and SDA. Reword it a little with
the help of Simon's native language skills :)

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Change since v1: add Simon's rewording

 drivers/i2c/busses/i2c-gpio.c | 17 +++++------------
 1 file changed, 5 insertions(+), 12 deletions(-)

diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index c008d209f0b8..e8cde2c40d3f 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -286,11 +286,11 @@ static int i2c_gpio_probe(struct platform_device *pdev)
 
 	/*
 	 * First get the GPIO pins; if it fails, we'll defer the probe.
-	 * If the SDA line is marked from platform data or device tree as
-	 * "open drain" it means something outside of our control is making
-	 * this line being handled as open drain, and we should just handle
-	 * it as any other output. Else we enforce open drain as this is
-	 * required for an I2C bus.
+	 * If the SCL/SDA lines are marked "open drain" by platform data or
+	 * device tree then this means that something outside of our control is
+	 * marking these lines to be handled as open drain, and we should just
+	 * handle them as we handle any other output. Else we enforce open
+	 * drain as this is required for an I2C bus.
 	 */
 	if (pdata->sda_is_open_drain)
 		gflags = GPIOD_OUT_HIGH;
@@ -300,13 +300,6 @@ static int i2c_gpio_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->sda))
 		return PTR_ERR(priv->sda);
 
-	/*
-	 * If the SCL line is marked from platform data or device tree as
-	 * "open drain" it means something outside of our control is making
-	 * this line being handled as open drain, and we should just handle
-	 * it as any other output. Else we enforce open drain as this is
-	 * required for an I2C bus.
-	 */
 	if (pdata->scl_is_open_drain)
 		gflags = GPIOD_OUT_HIGH;
 	else
-- 
2.19.1