From: Yu Wang <yyuwang@codeaurora.org> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Yu Wang <yyuwang@codeaurora.org> Subject: [PATCH] ath10k: correct the format of host memory chunks in wmi init command Date: Thu, 14 Feb 2019 11:10:34 +0800 [thread overview] Message-ID: <20190214031034.26969-1-yyuwang@codeaurora.org> (raw) This is a theoretical fix, the issue is found in code review. When adding the host memory chunks into wmi-tlv init command, there is no separate tlv header for each host memory chunk in the struct array, which breaches the convention between host and firmware, will result in mismatch between the two. To fix this issue, add separate tlv headers for the host memory chunks in wmi-tlv init command. Signed-off-by: Yu Wang <yyuwang@codeaurora.org> --- drivers/net/wireless/ath/ath10k/wmi-tlv.c | 39 +++++++++++++++++++++-- 1 file changed, 36 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c index 5d05bff2c5da..a81c6faa2fd7 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c @@ -1580,17 +1580,50 @@ ath10k_wmi_tlv_op_gen_pdev_set_param(struct ath10k *ar, u32 param_id, return skb; } +static void +ath10k_wmi_tlv_put_host_mem_chunks(struct ath10k *ar, void *host_mem_chunks) +{ + struct host_memory_chunk *chunk; + struct wmi_tlv *tlv; + int i; + __le16 tlv_len, tlv_tag; + + tlv_tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_WLAN_HOST_MEMORY_CHUNK); + tlv_len = __cpu_to_le16(sizeof(*chunk)); + for (i = 0; i < ar->wmi.num_mem_chunks; i++) { + tlv = host_mem_chunks; + tlv->tag = tlv_tag; + tlv->len = tlv_len; + chunk = (void *)tlv->value; + + chunk->ptr = __cpu_to_le32(ar->wmi.mem_chunks[i].paddr); + chunk->size = __cpu_to_le32(ar->wmi.mem_chunks[i].len); + chunk->req_id = __cpu_to_le32(ar->wmi.mem_chunks[i].req_id); + + ath10k_dbg(ar, ATH10K_DBG_WMI, + "wmi-tlv chunk %d len %d, addr 0x%llx, id 0x%x\n", + i, + ar->wmi.mem_chunks[i].len, + (unsigned long long)ar->wmi.mem_chunks[i].paddr, + ar->wmi.mem_chunks[i].req_id); + + host_mem_chunks += sizeof(*tlv); + host_mem_chunks += sizeof(*chunk); + } +} + static struct sk_buff *ath10k_wmi_tlv_op_gen_init(struct ath10k *ar) { struct sk_buff *skb; struct wmi_tlv *tlv; struct wmi_tlv_init_cmd *cmd; struct wmi_tlv_resource_config *cfg; - struct wmi_host_mem_chunks *chunks; + void *chunks; size_t len, chunks_len; void *ptr; - chunks_len = ar->wmi.num_mem_chunks * sizeof(struct host_memory_chunk); + chunks_len = ar->wmi.num_mem_chunks * + (sizeof(struct host_memory_chunk) + sizeof(*tlv)); len = (sizeof(*tlv) + sizeof(*cmd)) + (sizeof(*tlv) + sizeof(*cfg)) + (sizeof(*tlv) + chunks_len); @@ -1690,7 +1723,7 @@ static struct sk_buff *ath10k_wmi_tlv_op_gen_init(struct ath10k *ar) cfg->num_ocb_schedules = __cpu_to_le32(0); cfg->host_capab = __cpu_to_le32(WMI_TLV_FLAG_MGMT_BUNDLE_TX_COMPL); - ath10k_wmi_put_host_mem_chunks(ar, chunks); + ath10k_wmi_tlv_put_host_mem_chunks(ar, chunks); ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv init\n"); return skb; -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Yu Wang <yyuwang@codeaurora.org> To: ath10k@lists.infradead.org Cc: Yu Wang <yyuwang@codeaurora.org>, linux-wireless@vger.kernel.org Subject: [PATCH] ath10k: correct the format of host memory chunks in wmi init command Date: Thu, 14 Feb 2019 11:10:34 +0800 [thread overview] Message-ID: <20190214031034.26969-1-yyuwang@codeaurora.org> (raw) This is a theoretical fix, the issue is found in code review. When adding the host memory chunks into wmi-tlv init command, there is no separate tlv header for each host memory chunk in the struct array, which breaches the convention between host and firmware, will result in mismatch between the two. To fix this issue, add separate tlv headers for the host memory chunks in wmi-tlv init command. Signed-off-by: Yu Wang <yyuwang@codeaurora.org> --- drivers/net/wireless/ath/ath10k/wmi-tlv.c | 39 +++++++++++++++++++++-- 1 file changed, 36 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c index 5d05bff2c5da..a81c6faa2fd7 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c @@ -1580,17 +1580,50 @@ ath10k_wmi_tlv_op_gen_pdev_set_param(struct ath10k *ar, u32 param_id, return skb; } +static void +ath10k_wmi_tlv_put_host_mem_chunks(struct ath10k *ar, void *host_mem_chunks) +{ + struct host_memory_chunk *chunk; + struct wmi_tlv *tlv; + int i; + __le16 tlv_len, tlv_tag; + + tlv_tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_WLAN_HOST_MEMORY_CHUNK); + tlv_len = __cpu_to_le16(sizeof(*chunk)); + for (i = 0; i < ar->wmi.num_mem_chunks; i++) { + tlv = host_mem_chunks; + tlv->tag = tlv_tag; + tlv->len = tlv_len; + chunk = (void *)tlv->value; + + chunk->ptr = __cpu_to_le32(ar->wmi.mem_chunks[i].paddr); + chunk->size = __cpu_to_le32(ar->wmi.mem_chunks[i].len); + chunk->req_id = __cpu_to_le32(ar->wmi.mem_chunks[i].req_id); + + ath10k_dbg(ar, ATH10K_DBG_WMI, + "wmi-tlv chunk %d len %d, addr 0x%llx, id 0x%x\n", + i, + ar->wmi.mem_chunks[i].len, + (unsigned long long)ar->wmi.mem_chunks[i].paddr, + ar->wmi.mem_chunks[i].req_id); + + host_mem_chunks += sizeof(*tlv); + host_mem_chunks += sizeof(*chunk); + } +} + static struct sk_buff *ath10k_wmi_tlv_op_gen_init(struct ath10k *ar) { struct sk_buff *skb; struct wmi_tlv *tlv; struct wmi_tlv_init_cmd *cmd; struct wmi_tlv_resource_config *cfg; - struct wmi_host_mem_chunks *chunks; + void *chunks; size_t len, chunks_len; void *ptr; - chunks_len = ar->wmi.num_mem_chunks * sizeof(struct host_memory_chunk); + chunks_len = ar->wmi.num_mem_chunks * + (sizeof(struct host_memory_chunk) + sizeof(*tlv)); len = (sizeof(*tlv) + sizeof(*cmd)) + (sizeof(*tlv) + sizeof(*cfg)) + (sizeof(*tlv) + chunks_len); @@ -1690,7 +1723,7 @@ static struct sk_buff *ath10k_wmi_tlv_op_gen_init(struct ath10k *ar) cfg->num_ocb_schedules = __cpu_to_le32(0); cfg->host_capab = __cpu_to_le32(WMI_TLV_FLAG_MGMT_BUNDLE_TX_COMPL); - ath10k_wmi_put_host_mem_chunks(ar, chunks); + ath10k_wmi_tlv_put_host_mem_chunks(ar, chunks); ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv init\n"); return skb; -- 2.20.1 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2019-02-14 3:10 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-02-14 3:10 Yu Wang [this message] 2019-02-14 3:10 ` [PATCH] ath10k: correct the format of host memory chunks in wmi init command Yu Wang 2019-02-26 13:00 ` Kalle Valo 2019-02-26 13:00 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190214031034.26969-1-yyuwang@codeaurora.org \ --to=yyuwang@codeaurora.org \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.