All of lore.kernel.org
 help / color / mirror / Atom feed
From: Faiz Abbas <faiz_abbas@ti.com>
To: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-mmc@vger.kernel.org>, <linux-omap@vger.kernel.org>
Cc: <ulf.hansson@linaro.org>, <robh+dt@kernel.org>,
	<mark.rutland@arm.com>, <adrian.hunter@intel.com>,
	<kishon@ti.com>, <zhang.chunyan@linaro.org>, <faiz_abbas@ti.com>
Subject: [PATCH v2 4/8] mmc: sdhci-omap: Add using external dma
Date: Sat, 16 Feb 2019 00:50:29 +0530	[thread overview]
Message-ID: <20190215192033.24203-5-faiz_abbas@ti.com> (raw)
In-Reply-To: <20190215192033.24203-1-faiz_abbas@ti.com>

From: Chunyan Zhang <zhang.chunyan@linaro.org>

sdhci-omap can support both external dma controller via dmaengine framework
as well as ADMA which standard SD host controller provides.

Fixes by Faiz Abbas <fazi_abbas@ti.com>:
1. Switch to DMA slave mode when using external DMA
2. Add offset to mapbase

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
 drivers/mmc/host/Kconfig      |  1 +
 drivers/mmc/host/sdhci-omap.c | 16 +++++++++++++++-
 2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index f3b442528ed8..5d1189478ee0 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -979,6 +979,7 @@ config MMC_SDHCI_OMAP
 	depends on MMC_SDHCI_PLTFM && OF
 	select THERMAL
 	imply TI_SOC_THERMAL
+	select MMC_SDHCI_EXTERNAL_DMA if DMA_ENGINE
 	help
 	  This selects the Secure Digital Host Controller Interface (SDHCI)
 	  support present in TI's DRA7 SOCs. The controller supports
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index c11c18a9aacb..8a05e94fe612 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -696,7 +696,11 @@ static int sdhci_omap_enable_dma(struct sdhci_host *host)
 	struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
 
 	reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
-	reg |= CON_DMA_MASTER;
+	reg &= ~CON_DMA_MASTER;
+	/* Switch to DMA slave mode when using external DMA */
+	if (!host->use_external_dma)
+		reg |= CON_DMA_MASTER;
+
 	sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg);
 
 	return 0;
@@ -1010,6 +1014,7 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	const struct of_device_id *match;
 	struct sdhci_omap_data *data;
 	const struct soc_device_attribute *soc;
+	struct resource *regs;
 
 	match = of_match_device(omap_sdhci_match, dev);
 	if (!match)
@@ -1022,6 +1027,10 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	}
 	offset = data->offset;
 
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+
 	host = sdhci_pltfm_init(pdev, &sdhci_omap_pdata,
 				sizeof(*omap_host));
 	if (IS_ERR(host)) {
@@ -1038,6 +1047,7 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	omap_host->timing = MMC_TIMING_LEGACY;
 	omap_host->flags = data->flags;
 	host->ioaddr += offset;
+	host->mapbase = regs->start + offset;
 
 	mmc = host->mmc;
 	sdhci_get_of_property(pdev);
@@ -1105,6 +1115,10 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	host->mmc_host_ops.execute_tuning = sdhci_omap_execute_tuning;
 	host->mmc_host_ops.enable_sdio_irq = sdhci_omap_enable_sdio_irq;
 
+	/* Switch to external DMA only if there is the "dmas" property */
+	if (of_find_property(dev->of_node, "dmas", NULL))
+		sdhci_switch_external_dma(host, true);
+
 	ret = sdhci_setup_host(host);
 	if (ret)
 		goto err_put_sync;
-- 
2.19.2


WARNING: multiple messages have this Message-ID (diff)
From: Faiz Abbas <faiz_abbas@ti.com>
To: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-mmc@vger.kernel.org, linux-omap@vger.kernel.org
Cc: ulf.hansson@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
	adrian.hunter@intel.com, kishon@ti.com, zhang.chunyan@linaro.org,
	faiz_abbas@ti.com
Subject: [PATCH v2 4/8] mmc: sdhci-omap: Add using external dma
Date: Sat, 16 Feb 2019 00:50:29 +0530	[thread overview]
Message-ID: <20190215192033.24203-5-faiz_abbas@ti.com> (raw)
In-Reply-To: <20190215192033.24203-1-faiz_abbas@ti.com>

From: Chunyan Zhang <zhang.chunyan@linaro.org>

sdhci-omap can support both external dma controller via dmaengine framework
as well as ADMA which standard SD host controller provides.

Fixes by Faiz Abbas <fazi_abbas@ti.com>:
1. Switch to DMA slave mode when using external DMA
2. Add offset to mapbase

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
 drivers/mmc/host/Kconfig      |  1 +
 drivers/mmc/host/sdhci-omap.c | 16 +++++++++++++++-
 2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index f3b442528ed8..5d1189478ee0 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -979,6 +979,7 @@ config MMC_SDHCI_OMAP
 	depends on MMC_SDHCI_PLTFM && OF
 	select THERMAL
 	imply TI_SOC_THERMAL
+	select MMC_SDHCI_EXTERNAL_DMA if DMA_ENGINE
 	help
 	  This selects the Secure Digital Host Controller Interface (SDHCI)
 	  support present in TI's DRA7 SOCs. The controller supports
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index c11c18a9aacb..8a05e94fe612 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -696,7 +696,11 @@ static int sdhci_omap_enable_dma(struct sdhci_host *host)
 	struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
 
 	reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
-	reg |= CON_DMA_MASTER;
+	reg &= ~CON_DMA_MASTER;
+	/* Switch to DMA slave mode when using external DMA */
+	if (!host->use_external_dma)
+		reg |= CON_DMA_MASTER;
+
 	sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg);
 
 	return 0;
@@ -1010,6 +1014,7 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	const struct of_device_id *match;
 	struct sdhci_omap_data *data;
 	const struct soc_device_attribute *soc;
+	struct resource *regs;
 
 	match = of_match_device(omap_sdhci_match, dev);
 	if (!match)
@@ -1022,6 +1027,10 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	}
 	offset = data->offset;
 
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+
 	host = sdhci_pltfm_init(pdev, &sdhci_omap_pdata,
 				sizeof(*omap_host));
 	if (IS_ERR(host)) {
@@ -1038,6 +1047,7 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	omap_host->timing = MMC_TIMING_LEGACY;
 	omap_host->flags = data->flags;
 	host->ioaddr += offset;
+	host->mapbase = regs->start + offset;
 
 	mmc = host->mmc;
 	sdhci_get_of_property(pdev);
@@ -1105,6 +1115,10 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	host->mmc_host_ops.execute_tuning = sdhci_omap_execute_tuning;
 	host->mmc_host_ops.enable_sdio_irq = sdhci_omap_enable_sdio_irq;
 
+	/* Switch to external DMA only if there is the "dmas" property */
+	if (of_find_property(dev->of_node, "dmas", NULL))
+		sdhci_switch_external_dma(host, true);
+
 	ret = sdhci_setup_host(host);
 	if (ret)
 		goto err_put_sync;
-- 
2.19.2

  parent reply	other threads:[~2019-02-15 19:17 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-15 19:20 [PATCH v2 0/8] Port am335 and am437 devices to sdhci-omap Faiz Abbas
2019-02-15 19:20 ` Faiz Abbas
2019-02-15 19:20 ` [PATCH v2 1/8] mmc: sdhci: Get rid of finish_tasklet Faiz Abbas
2019-02-15 19:20   ` Faiz Abbas
2019-02-25  8:17   ` Adrian Hunter
2019-03-06 10:00     ` Faiz Abbas
2019-03-06 10:00       ` Faiz Abbas
2019-03-08 13:36       ` Adrian Hunter
2019-03-12 17:30         ` Rizvi, Mohammad Faiz Abbas
2019-03-12 17:30           ` Rizvi, Mohammad Faiz Abbas
2019-03-14 11:15           ` Grygorii Strashko
2019-03-14 11:15             ` Grygorii Strashko
2019-03-14 11:41             ` Faiz Abbas
2019-03-14 11:41               ` Faiz Abbas
2019-03-14 11:40           ` Arnd Bergmann
2019-03-18  9:33   ` Ulf Hansson
2019-03-26  7:33     ` Adrian Hunter
2019-04-02  7:59       ` Faiz Abbas
2019-04-02 13:12         ` Adrian Hunter
2019-02-15 19:20 ` [PATCH v2 2/8] mmc: sdhci: add support for using external DMA devices Faiz Abbas
2019-02-15 19:20   ` Faiz Abbas
2019-02-15 19:20 ` [PATCH v2 3/8] dt-bindings: sdhci-omap: Add properties for using external dma Faiz Abbas
2019-02-15 19:20   ` Faiz Abbas
2019-02-15 20:07   ` Tony Lindgren
2019-02-18 13:41     ` Faiz Abbas
2019-02-18 13:41       ` Faiz Abbas
2019-02-18 16:20       ` Tony Lindgren
2019-02-18 16:28         ` Tony Lindgren
2019-02-18 20:12       ` Rob Herring
2019-02-19 13:32         ` Faiz Abbas
2019-02-19 13:32           ` Faiz Abbas
2019-02-15 19:20 ` Faiz Abbas [this message]
2019-02-15 19:20   ` [PATCH v2 4/8] mmc: sdhci-omap: Add " Faiz Abbas
2019-02-15 19:20 ` [PATCH v2 5/8] mmc: sdhci: Add quirk for disabling DTO during erase command Faiz Abbas
2019-02-15 19:20   ` Faiz Abbas
2019-02-15 19:20 ` [PATCH v2 6/8] mmc: sdhci-omap: Add DISABLE_DTO_FOR_ERASE Quirk Faiz Abbas
2019-02-15 19:20   ` Faiz Abbas
2019-02-15 19:20 ` [PATCH v2 7/8] dt-bindings: sdhci-omap: Add am335x and am437x specific bindings Faiz Abbas
2019-02-15 19:20   ` Faiz Abbas
2019-02-15 19:20 ` [PATCH v2 8/8] mmc: sdhci-omap: Add am335x and am437x specific compatibles Faiz Abbas
2019-02-15 19:20   ` Faiz Abbas
2019-02-15 20:02 ` [PATCH v2 0/8] Port am335 and am437 devices to sdhci-omap Tony Lindgren
2019-02-18 13:49   ` Faiz Abbas
2019-02-18 13:49     ` Faiz Abbas
2019-02-18 16:25     ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190215192033.24203-5-faiz_abbas@ti.com \
    --to=faiz_abbas@ti.com \
    --cc=adrian.hunter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=ulf.hansson@linaro.org \
    --cc=zhang.chunyan@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.