[PATCH v4 2/3] spi: add FTDI MPSSE SPI controller driver

[Anatolij Gustschin <agust@denx.de>]

Add SPI bus controller driver for FTDI MPSSE mode. This driver
is supposed to be used together with the FT232H interface driver
for FPGA configuration in drivers/usb/misc/ft232h-intf.c which
adds an mpsse spi platform device describing USB SPI bus with
attached SPI slave devices.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 drivers/spi/Kconfig          |   7 +
 drivers/spi/Makefile         |   1 +
 drivers/spi/spi-ftdi-mpsse.c | 651 +++++++++++++++++++++++++++++++++++
 3 files changed, 659 insertions(+)
 create mode 100644 drivers/spi/spi-ftdi-mpsse.c

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index f761655e2a36..38015574e2dc 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -289,6 +289,13 @@ config SPI_NXP_FLEXSPI
 	  This controller does not support generic SPI messages and only
 	  supports the high-level SPI memory interface.
 
+config SPI_FTDI_MPSSE
+	tristate "FTDI MPSSE SPI controller"
+	depends on USB_FT232H_INTF || COMPILE_TEST
+	help
+	  FT232H supports SPI in MPSSE mode. This driver provides MPSSE
+	  SPI controller in master mode.
+
 config SPI_GPIO
 	tristate "GPIO-based bitbanging SPI Master"
 	depends on GPIOLIB || COMPILE_TEST
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index d8fc03c9faa2..2a1fd2c4d2bd 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_SPI_FSL_ESPI)		+= spi-fsl-espi.o
 obj-$(CONFIG_SPI_FSL_LPSPI)		+= spi-fsl-lpspi.o
 obj-$(CONFIG_SPI_FSL_QUADSPI)		+= spi-fsl-qspi.o
 obj-$(CONFIG_SPI_FSL_SPI)		+= spi-fsl-spi.o
+obj-$(CONFIG_SPI_FTDI_MPSSE)		+= spi-ftdi-mpsse.o
 obj-$(CONFIG_SPI_GPIO)			+= spi-gpio.o
 obj-$(CONFIG_SPI_IMG_SPFI)		+= spi-img-spfi.o
 obj-$(CONFIG_SPI_IMX)			+= spi-imx.o
diff --git a/drivers/spi/spi-ftdi-mpsse.c b/drivers/spi/spi-ftdi-mpsse.c
new file mode 100644
index 000000000000..ae8442eb4052
--- /dev/null
+++ b/drivers/spi/spi-ftdi-mpsse.c
@@ -0,0 +1,651 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// FTDI FT232H MPSSE SPI controller driver
+//
+// Copyright (C) 2017 - 2018 DENX Software Engineering
+// Anatolij Gustschin <agust@denx.de>
+//
+
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
+#include <linux/platform_device.h>
+#include <linux/printk.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+#include <linux/sizes.h>
+#include <linux/usb.h>
+#include <linux/usb/ft232h-intf.h>
+
+enum gpiol {
+	MPSSE_SK	= BIT(0),
+	MPSSE_DO	= BIT(1),
+	MPSSE_DI	= BIT(2),
+	MPSSE_CS	= BIT(3),
+};
+
+struct ftdi_spi {
+	struct platform_device *pdev;
+	struct usb_interface *intf;
+	struct spi_controller *master;
+	const struct ft232h_intf_ops *iops;
+	struct gpiod_lookup_table *lookup[FTDI_MPSSE_GPIOS];
+	struct gpio_desc **cs_gpios;
+
+	u8 txrx_cmd;
+	u8 rx_cmd;
+	u8 tx_cmd;
+	u8 xfer_buf[SZ_64K];
+	u16 last_mode;
+};
+
+static void ftdi_spi_set_cs(struct spi_device *spi, bool enable)
+{
+	struct ftdi_spi *priv = spi_controller_get_devdata(spi->master);
+	u16 cs = spi->chip_select;
+
+	dev_dbg(&priv->pdev->dev, "%s: CS %u, cs mode %d, val %d\n",
+		__func__, cs, (spi->mode & SPI_CS_HIGH), enable);
+
+	gpiod_set_raw_value_cansleep(priv->cs_gpios[cs], enable);
+}
+
+static inline u8 ftdi_spi_txrx_byte_cmd(struct spi_device *spi)
+{
+	u8 mode = spi->mode & (SPI_CPOL | SPI_CPHA);
+	u8 cmd;
+
+	if (spi->mode & SPI_LSB_FIRST) {
+		switch (mode) {
+		case SPI_MODE_0:
+		case SPI_MODE_1:
+			cmd = TXF_RXR_BYTES_LSB;
+			break;
+		case SPI_MODE_2:
+		case SPI_MODE_3:
+			cmd = TXR_RXF_BYTES_LSB;
+			break;
+		}
+	} else {
+		switch (mode) {
+		case SPI_MODE_0:
+		case SPI_MODE_1:
+			cmd = TXF_RXR_BYTES_MSB;
+			break;
+		case SPI_MODE_2:
+		case SPI_MODE_3:
+			cmd = TXR_RXF_BYTES_MSB;
+			break;
+		}
+	}
+	return cmd;
+}
+
+static inline int ftdi_spi_loopback_cfg(struct ftdi_spi *priv, int on)
+{
+	int ret;
+
+	priv->xfer_buf[0] = on ? LOOPBACK_ON : LOOPBACK_OFF;
+
+	ret = priv->iops->write_data(priv->intf, priv->xfer_buf, 1);
+	if (ret < 0)
+		dev_warn(&priv->pdev->dev, "loopback %d failed\n", on);
+	return ret;
+}
+
+static int ftdi_spi_tx_rx(struct ftdi_spi *priv, struct spi_device *spi,
+			  struct spi_transfer *t)
+{
+	const struct ft232h_intf_ops *ops = priv->iops;
+	struct device *dev = &priv->pdev->dev;
+	void *rx_offs;
+	const void *tx_offs;
+	size_t remaining, stride;
+	size_t rx_stride;
+	int ret, tout = 10;
+	const u8 *tx_data = t->tx_buf;
+	u8 *rx_data = t->rx_buf;
+
+	ops->lock(priv->intf);
+
+	if (spi->mode & SPI_LOOP) {
+		ret = ftdi_spi_loopback_cfg(priv, 1);
+		if (ret < 0)
+			goto err;
+	}
+
+	remaining = t->len;
+	rx_offs = rx_data;
+	tx_offs = tx_data;
+
+	while (remaining) {
+		stride = min_t(size_t, remaining, SZ_512 - 3);
+
+		priv->xfer_buf[0] = priv->txrx_cmd;
+		priv->xfer_buf[1] = stride - 1;
+		priv->xfer_buf[2] = (stride - 1) >> 8;
+		memcpy(&priv->xfer_buf[3], tx_offs, stride);
+		print_hex_dump_debug("WR: ", DUMP_PREFIX_OFFSET, 16, 1,
+				     priv->xfer_buf, stride + 3, 1);
+
+		ret = ops->write_data(priv->intf, priv->xfer_buf, stride + 3);
+		if (ret < 0) {
+			dev_err(dev, "%s: xfer failed %d\n", __func__, ret);
+			goto fail;
+		}
+		dev_dbg(dev, "%s: WR %zu byte(s), TXRX CMD 0x%02x\n",
+			__func__, stride, priv->txrx_cmd);
+
+		rx_stride = min_t(size_t, stride, SZ_512);
+
+		ret = ops->read_data(priv->intf, priv->xfer_buf, rx_stride);
+		while (ret == 0) {
+			/* If no data yet, wait and repeat */
+			usleep_range(5000, 5100);
+			ret = ops->read_data(priv->intf, priv->xfer_buf,
+					     rx_stride);
+			dev_dbg(dev, "Waiting data ready, read: %d\n", ret);
+			if (!--tout) {
+				dev_err(dev, "Read timeout\n");
+				ret = -ETIMEDOUT;
+				goto fail;
+			}
+		}
+
+		if (ret < 0)
+			goto fail;
+
+		print_hex_dump_debug("RD: ", DUMP_PREFIX_OFFSET, 16, 1,
+				     priv->xfer_buf, rx_stride, 1);
+		memcpy(rx_offs, priv->xfer_buf, ret);
+		rx_offs += ret;
+
+		remaining -= stride;
+		tx_offs += stride;
+		dev_dbg(dev, "%s: WR remains %zu\n", __func__, remaining);
+	}
+
+	ret = 0;
+
+fail:
+	if (spi->mode & SPI_LOOP)
+		ftdi_spi_loopback_cfg(priv, 0);
+
+err:
+	ops->unlock(priv->intf);
+	return ret;
+}
+
+static int ftdi_spi_push_buf(struct ftdi_spi *priv, const void *buf, size_t len)
+{
+	size_t bytesleft = len;
+	int ret;
+
+	do {
+		ret = priv->iops->write_data(priv->intf, buf, bytesleft);
+		if (ret < 0)
+			return ret;
+
+		buf += ret;
+		bytesleft -= ret;
+	} while (bytesleft);
+
+	return len;
+}
+
+static int ftdi_spi_tx(struct ftdi_spi *priv, struct spi_transfer *xfer)
+{
+	const void *tx_offs;
+	size_t remaining, stride;
+	int ret;
+
+	priv->iops->lock(priv->intf);
+
+	tx_offs = xfer->tx_buf;
+	remaining = xfer->len;
+
+	do {
+		stride = min_t(size_t, remaining, sizeof(priv->xfer_buf) - 3);
+
+		priv->xfer_buf[0] = priv->tx_cmd;
+		priv->xfer_buf[1] = stride - 1;
+		priv->xfer_buf[2] = (stride - 1) >> 8;
+
+		memcpy(&priv->xfer_buf[3], tx_offs, stride);
+
+		ret = ftdi_spi_push_buf(priv, priv->xfer_buf, stride + 3);
+		if (ret < 0) {
+			dev_dbg(&priv->pdev->dev, "%s: tx failed %d\n",
+				__func__, ret);
+			goto err;
+		}
+		dev_dbg(&priv->pdev->dev, "%s: %zu byte(s) done\n",
+			__func__, stride);
+		remaining -= stride;
+		tx_offs += stride;
+	} while (remaining);
+
+	ret = 0;
+err:
+	priv->iops->unlock(priv->intf);
+	return ret;
+}
+
+static int ftdi_spi_rx(struct ftdi_spi *priv, struct spi_transfer *xfer)
+{
+	const struct ft232h_intf_ops *ops = priv->iops;
+	struct device *dev = &priv->pdev->dev;
+	size_t remaining, stride;
+	int ret, tout = 10;
+	void *rx_offs;
+
+	dev_dbg(dev, "%s: CMD 0x%02x, len %u\n",
+		__func__, priv->rx_cmd, xfer->len);
+
+	priv->xfer_buf[0] = priv->rx_cmd;
+	priv->xfer_buf[1] = xfer->len - 1;
+	priv->xfer_buf[2] = (xfer->len - 1) >> 8;
+
+	ops->lock(priv->intf);
+
+	ret = ops->write_data(priv->intf, priv->xfer_buf, 3);
+	if (ret < 0)
+		goto err;
+
+	remaining = xfer->len;
+	rx_offs = xfer->rx_buf;
+
+	do {
+		stride = min_t(size_t, remaining, SZ_512);
+
+		ret = ops->read_data(priv->intf, priv->xfer_buf, stride);
+		if (ret < 0)
+			goto err;
+
+		if (!ret) {
+			dev_dbg(dev, "Waiting for data (read: %02X), tout %d\n",
+				ret, tout);
+			if (--tout)
+				continue;
+
+			dev_dbg(dev, "read timeout...\n");
+			ret = -ETIMEDOUT;
+			goto err;
+		}
+
+		memcpy(rx_offs, priv->xfer_buf, ret);
+
+		dev_dbg(dev, "%s: %d byte(s)\n", __func__, ret);
+		rx_offs += ret;
+		remaining -= ret;
+	} while (remaining);
+
+	ret = 0;
+err:
+	ops->unlock(priv->intf);
+	return ret;
+}
+
+static int ftdi_spi_transfer_one(struct spi_controller *ctlr,
+				 struct spi_device *spi,
+				 struct spi_transfer *xfer)
+{
+	struct ftdi_spi *priv = spi_controller_get_devdata(ctlr);
+	struct device *dev = &priv->pdev->dev;
+	int ret = 0;
+
+	if (!xfer->len)
+		return 0;
+
+	if (priv->last_mode != spi->mode) {
+		u8 spi_mode = spi->mode & (SPI_CPOL | SPI_CPHA);
+		u8 pins = 0;
+
+		dev_dbg(dev, "%s: MODE 0x%x\n", __func__, spi->mode);
+
+		if (spi->mode & SPI_LSB_FIRST) {
+			switch (spi_mode) {
+			case SPI_MODE_0:
+			case SPI_MODE_3:
+				priv->tx_cmd = TX_BYTES_FE_LSB;
+				priv->rx_cmd = RX_BYTES_RE_LSB;
+				break;
+			case SPI_MODE_1:
+			case SPI_MODE_2:
+				priv->tx_cmd = TX_BYTES_RE_LSB;
+				priv->rx_cmd = RX_BYTES_FE_LSB;
+				break;
+			}
+		} else {
+			switch (spi_mode) {
+			case SPI_MODE_0:
+			case SPI_MODE_3:
+				priv->tx_cmd = TX_BYTES_FE_MSB;
+				priv->rx_cmd = RX_BYTES_RE_MSB;
+				break;
+			case SPI_MODE_1:
+			case SPI_MODE_2:
+				priv->tx_cmd = TX_BYTES_RE_MSB;
+				priv->rx_cmd = RX_BYTES_FE_MSB;
+				break;
+			}
+		}
+
+		priv->txrx_cmd = ftdi_spi_txrx_byte_cmd(spi);
+
+		switch (spi_mode) {
+		case SPI_MODE_2:
+		case SPI_MODE_3:
+			pins |= MPSSE_SK;
+			break;
+		}
+
+		ret = priv->iops->cfg_bus_pins(priv->intf,
+					       MPSSE_SK | MPSSE_DO, pins);
+		if (ret < 0) {
+			dev_err(dev, "IO cfg failed: %d\n", ret);
+			return ret;
+		}
+		priv->last_mode = spi->mode;
+	}
+
+	dev_dbg(dev, "%s: mode 0x%x, CMD RX/TX 0x%x/0x%x\n",
+		__func__, spi->mode, priv->rx_cmd, priv->tx_cmd);
+
+	if (xfer->tx_buf && xfer->rx_buf)
+		ret = ftdi_spi_tx_rx(priv, spi, xfer);
+	else if (xfer->tx_buf)
+		ret = ftdi_spi_tx(priv, xfer);
+	else if (xfer->rx_buf)
+		ret = ftdi_spi_rx(priv, xfer);
+
+	dev_dbg(dev, "%s: xfer ret %d\n", __func__, ret);
+
+	spi_finalize_current_transfer(ctlr);
+	return ret;
+}
+
+static int ftdi_mpsse_init(struct ftdi_spi *priv)
+{
+	struct platform_device *pdev = priv->pdev;
+	int ret;
+
+	dev_dbg(&pdev->dev, "MPSSE init\n");
+
+	/* Setup and send off the Hi-Speed specific commands for the FTx232H */
+	priv->xfer_buf[0] = DIS_DIV_5;      /* Use 60MHz master clock */
+	priv->xfer_buf[1] = DIS_ADAPTIVE;   /* Turn off adaptive clocking */
+	priv->xfer_buf[2] = DIS_3_PHASE;    /* Disable three-phase clocking */
+
+	priv->iops->lock(priv->intf);
+
+	ret = priv->iops->write_data(priv->intf, priv->xfer_buf, 3);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Clk cfg failed: %d\n", ret);
+		priv->iops->unlock(priv->intf);
+		return ret;
+	}
+
+	priv->xfer_buf[0] = TCK_DIVISOR;
+	priv->xfer_buf[1] = div_value(60000000);
+	priv->xfer_buf[2] = div_value(60000000) >> 8;
+	dev_dbg(&pdev->dev, "TCK_DIVISOR: 0x%04x 0x%04x\n",
+		priv->xfer_buf[1], priv->xfer_buf[2]);
+
+	ret = priv->iops->write_data(priv->intf, priv->xfer_buf, 3);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Clk cfg failed: %d\n", ret);
+		priv->iops->unlock(priv->intf);
+		return ret;
+	}
+
+	priv->iops->unlock(priv->intf);
+
+	ret = priv->iops->cfg_bus_pins(priv->intf, MPSSE_SK | MPSSE_DO, 0);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Can't init SPI bus pins: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ftdi_spi_init_io(struct spi_controller *master, unsigned int dev_idx)
+{
+	struct ftdi_spi *priv = spi_controller_get_devdata(master);
+	struct platform_device *pdev = priv->pdev;
+	const struct mpsse_spi_platform_data *pd;
+	const struct mpsse_spi_dev_data *data;
+	struct gpiod_lookup_table *lookup;
+	size_t lookup_size, size;
+	char *label;
+	unsigned int i;
+	u16 cs;
+
+	pd = pdev->dev.platform_data;
+
+	data = pd->spi_info[dev_idx].platform_data;
+	if (!data || data->magic != FTDI_MPSSE_IO_DESC_MAGIC)
+		return 0;
+
+	size = data->desc_len + 1;
+
+	lookup_size = sizeof(*lookup) + size * sizeof(struct gpiod_lookup);
+	lookup = devm_kzalloc(&pdev->dev, lookup_size, GFP_KERNEL);
+	if (!lookup)
+		return -ENOMEM;
+
+	cs = pd->spi_info[dev_idx].chip_select;
+
+	lookup->dev_id = devm_kasprintf(&pdev->dev, GFP_KERNEL, "spi%d.%d",
+					master->bus_num, cs);
+	if (!lookup->dev_id) {
+		devm_kfree(&pdev->dev, lookup);
+		return -ENOMEM;
+	}
+	dev_dbg(&pdev->dev, "LOOKUP ID '%s'\n", lookup->dev_id);
+
+	label = devm_kasprintf(&pdev->dev, GFP_KERNEL, "ftdi-mpsse-gpio.%d",
+			       pdev->id);
+	if (!label) {
+		devm_kfree(&pdev->dev, (void *)lookup->dev_id);
+		devm_kfree(&pdev->dev, lookup);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < data->desc_len; i++) {
+		dev_dbg(&pdev->dev, "con_id: '%s' idx: %d, flags: 0x%x\n",
+			data->desc[i].con_id, data->desc[i].idx,
+			data->desc[i].flags);
+		lookup->table[i].chip_label = label;
+		lookup->table[i].chip_hwnum = data->desc[i].idx;
+		lookup->table[i].idx = 0;
+		lookup->table[i].con_id = data->desc[i].con_id;
+		lookup->table[i].flags = data->desc[i].flags;
+	}
+
+	priv->lookup[cs] = lookup;
+	gpiod_add_lookup_table(lookup);
+	return 0;
+}
+
+static int ftdi_spi_probe(struct platform_device *pdev)
+{
+	const struct mpsse_spi_platform_data *pd;
+	struct device *dev = &pdev->dev;
+	struct spi_controller *master;
+	struct ftdi_spi *priv;
+	struct gpio_desc *desc;
+	u16 num_cs, max_cs = 0;
+	unsigned int i;
+	int ret;
+
+	pd = dev->platform_data;
+	if (!pd) {
+		dev_err(dev, "Missing platform data.\n");
+		return -EINVAL;
+	}
+
+	if (!pd->ops ||
+	    !pd->ops->read_data || !pd->ops->write_data ||
+	    !pd->ops->lock || !pd->ops->unlock ||
+	    !pd->ops->set_bitmode || !pd->ops->set_baudrate ||
+	    !pd->ops->disable_bitbang || !pd->ops->cfg_bus_pins)
+		return -EINVAL;
+
+	if (pd->spi_info_len > FTDI_MPSSE_GPIOS)
+		return -EINVAL;
+
+	/* Find max. slave chipselect number */
+	num_cs = pd->spi_info_len;
+	for (i = 0; i < num_cs; i++) {
+		if (max_cs < pd->spi_info[i].chip_select)
+			max_cs = pd->spi_info[i].chip_select;
+	}
+
+	if (max_cs > FTDI_MPSSE_GPIOS - 1) {
+		dev_err(dev, "Invalid max CS in platform data: %u\n", max_cs);
+		return -EINVAL;
+	}
+	dev_dbg(dev, "CS count %u, max CS %u\n", num_cs, max_cs);
+	max_cs += 1; /* including CS0 */
+
+	master = spi_alloc_master(&pdev->dev, sizeof(*priv));
+	if (!master)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, master);
+
+	priv = spi_controller_get_devdata(master);
+	priv->master = master;
+	priv->pdev = pdev;
+	priv->intf = to_usb_interface(dev->parent);
+	priv->iops = pd->ops;
+
+	master->bus_num = -1;
+	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP |
+			    SPI_CS_HIGH | SPI_LSB_FIRST;
+	master->num_chipselect = max_cs;
+	master->min_speed_hz = 450;
+	master->max_speed_hz = 30000000;
+	master->bits_per_word_mask = SPI_BPW_MASK(8);
+	master->set_cs = ftdi_spi_set_cs;
+	master->transfer_one = ftdi_spi_transfer_one;
+	master->auto_runtime_pm = false;
+
+	priv->cs_gpios = devm_kcalloc(&master->dev, max_cs, sizeof(desc),
+				      GFP_KERNEL);
+	if (!priv->cs_gpios) {
+		spi_controller_put(master);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < num_cs; i++) {
+		unsigned int idx = pd->spi_info[i].chip_select;
+
+		dev_dbg(&pdev->dev, "CS num: %u\n", idx);
+		desc = devm_gpiod_get_index(&priv->pdev->dev, "spi-cs",
+					    i, GPIOD_OUT_LOW);
+		if (IS_ERR(desc)) {
+			ret = PTR_ERR(desc);
+			dev_err(&pdev->dev, "CS %u gpiod err: %d\n", i, ret);
+			continue;
+		}
+		priv->cs_gpios[idx] = desc;
+	}
+
+	ret = spi_register_controller(master);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to register spi master\n");
+		spi_controller_put(master);
+		return ret;
+	}
+
+	ret = priv->iops->set_bitmode(priv->intf, 0x00, BITMODE_MPSSE);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to set MPSSE mode\n");
+		goto err;
+	}
+
+	priv->last_mode = 0xffff;
+
+	ret = ftdi_mpsse_init(priv);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "MPSSE init failed\n");
+		goto err;
+	}
+
+	for (i = 0; i < pd->spi_info_len; i++) {
+		struct spi_device *sdev;
+		u16 cs;
+
+		dev_dbg(&pdev->dev, "slave: '%s', CS: %u\n",
+			pd->spi_info[i].modalias, pd->spi_info[i].chip_select);
+
+		ret = ftdi_spi_init_io(master, i);
+		if (ret < 0) {
+			dev_warn(&pdev->dev, "Can't add slave IO: %d\n", ret);
+			continue;
+		}
+		sdev = spi_new_device(master, &pd->spi_info[i]);
+		if (!sdev) {
+			cs = pd->spi_info[i].chip_select;
+			dev_warn(&pdev->dev, "Can't add slave '%s', CS %u\n",
+				 pd->spi_info[i].modalias, cs);
+			if (priv->lookup[cs]) {
+				gpiod_remove_lookup_table(priv->lookup[cs]);
+				priv->lookup[cs] = NULL;
+			}
+		}
+	}
+
+	return 0;
+err:
+	platform_set_drvdata(pdev, NULL);
+	spi_unregister_controller(master);
+	return ret;
+}
+
+static int ftdi_spi_slave_release(struct device *dev, void *data)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct ftdi_spi *priv = data;
+	u16 cs = spi->chip_select;
+
+	dev_dbg(dev, "%s: remove CS %u\n", __func__, cs);
+	spi_unregister_device(to_spi_device(dev));
+
+	if (priv->lookup[cs])
+		gpiod_remove_lookup_table(priv->lookup[cs]);
+	return 0;
+}
+
+static int ftdi_spi_remove(struct platform_device *pdev)
+{
+	struct spi_controller *master;
+	struct ftdi_spi *priv;
+
+	master = platform_get_drvdata(pdev);
+	priv = spi_controller_get_devdata(master);
+
+	device_for_each_child(&master->dev, priv, ftdi_spi_slave_release);
+
+	spi_unregister_controller(master);
+	return 0;
+}
+
+static struct platform_driver ftdi_spi_driver = {
+	.driver.name	= "ftdi-mpsse-spi",
+	.probe		= ftdi_spi_probe,
+	.remove		= ftdi_spi_remove,
+};
+module_platform_driver(ftdi_spi_driver);
+
+MODULE_ALIAS("platform:ftdi-mpsse-spi");
+MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de");
+MODULE_DESCRIPTION("FTDI MPSSE SPI master driver");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1