From: Govind Singh <govinds@codeaurora.org> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Govind Singh <govinds@codeaurora.org> Subject: [PATCH] ath10k: Move board id and fw version logging to info level Date: Fri, 1 Mar 2019 20:20:00 +0530 [thread overview] Message-ID: <20190301145000.22624-1-govinds@codeaurora.org> (raw) Board id and fw version is not printed by default in qmi cap response message. Move board id and fw version logging to info level for default logging. [ 34.005399] ath10k_snoc a000000.wifi: qmi chip_id 0x30b chip_family 0x4001 board_id 0xff soc_id 0x40070000 [ 34.005432] ath10k_snoc a000000.wifi: qmi fw_version 0x3106836b fw_build_timestamp 2019-02-13 10:24 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.1-00875-QCAHLSWMTPL-1 Signed-off-by: Govind Singh <govinds@codeaurora.org> --- drivers/net/wireless/ath/ath10k/qmi.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c index 54f783ceb147..2b086fa16040 100644 --- a/drivers/net/wireless/ath/ath10k/qmi.c +++ b/drivers/net/wireless/ath/ath10k/qmi.c @@ -523,6 +523,7 @@ static int ath10k_qmi_cap_send_sync_msg(struct ath10k_qmi *qmi) struct wlfw_cap_resp_msg_v01 *resp; struct wlfw_cap_req_msg_v01 req = {}; struct ath10k *ar = qmi->ar; + struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar); struct qmi_txn txn; int ret; @@ -577,13 +578,13 @@ static int ath10k_qmi_cap_send_sync_msg(struct ath10k_qmi *qmi) strlcpy(qmi->fw_build_id, resp->fw_build_id, MAX_BUILD_ID_LEN + 1); - ath10k_dbg(ar, ATH10K_DBG_QMI, - "qmi chip_id 0x%x chip_family 0x%x board_id 0x%x soc_id 0x%x", - qmi->chip_info.chip_id, qmi->chip_info.chip_family, - qmi->board_info.board_id, qmi->soc_info.soc_id); - ath10k_dbg(ar, ATH10K_DBG_QMI, - "qmi fw_version 0x%x fw_build_timestamp %s fw_build_id %s", - qmi->fw_version, qmi->fw_build_timestamp, qmi->fw_build_id); + if (!test_bit(ATH10K_SNOC_FLAG_REGISTERED, &ar_snoc->flags)) { + ath10k_info(ar, "qmi chip_id 0x%x chip_family 0x%x board_id 0x%x soc_id 0x%x", + qmi->chip_info.chip_id, qmi->chip_info.chip_family, + qmi->board_info.board_id, qmi->soc_info.soc_id); + ath10k_info(ar, "qmi fw_version 0x%x fw_build_timestamp %s fw_build_id %s", + qmi->fw_version, qmi->fw_build_timestamp, qmi->fw_build_id); + } kfree(resp); return 0; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: Govind Singh <govinds@codeaurora.org> To: ath10k@lists.infradead.org Cc: Govind Singh <govinds@codeaurora.org>, linux-wireless@vger.kernel.org Subject: [PATCH] ath10k: Move board id and fw version logging to info level Date: Fri, 1 Mar 2019 20:20:00 +0530 [thread overview] Message-ID: <20190301145000.22624-1-govinds@codeaurora.org> (raw) Board id and fw version is not printed by default in qmi cap response message. Move board id and fw version logging to info level for default logging. [ 34.005399] ath10k_snoc a000000.wifi: qmi chip_id 0x30b chip_family 0x4001 board_id 0xff soc_id 0x40070000 [ 34.005432] ath10k_snoc a000000.wifi: qmi fw_version 0x3106836b fw_build_timestamp 2019-02-13 10:24 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.1-00875-QCAHLSWMTPL-1 Signed-off-by: Govind Singh <govinds@codeaurora.org> --- drivers/net/wireless/ath/ath10k/qmi.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c index 54f783ceb147..2b086fa16040 100644 --- a/drivers/net/wireless/ath/ath10k/qmi.c +++ b/drivers/net/wireless/ath/ath10k/qmi.c @@ -523,6 +523,7 @@ static int ath10k_qmi_cap_send_sync_msg(struct ath10k_qmi *qmi) struct wlfw_cap_resp_msg_v01 *resp; struct wlfw_cap_req_msg_v01 req = {}; struct ath10k *ar = qmi->ar; + struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar); struct qmi_txn txn; int ret; @@ -577,13 +578,13 @@ static int ath10k_qmi_cap_send_sync_msg(struct ath10k_qmi *qmi) strlcpy(qmi->fw_build_id, resp->fw_build_id, MAX_BUILD_ID_LEN + 1); - ath10k_dbg(ar, ATH10K_DBG_QMI, - "qmi chip_id 0x%x chip_family 0x%x board_id 0x%x soc_id 0x%x", - qmi->chip_info.chip_id, qmi->chip_info.chip_family, - qmi->board_info.board_id, qmi->soc_info.soc_id); - ath10k_dbg(ar, ATH10K_DBG_QMI, - "qmi fw_version 0x%x fw_build_timestamp %s fw_build_id %s", - qmi->fw_version, qmi->fw_build_timestamp, qmi->fw_build_id); + if (!test_bit(ATH10K_SNOC_FLAG_REGISTERED, &ar_snoc->flags)) { + ath10k_info(ar, "qmi chip_id 0x%x chip_family 0x%x board_id 0x%x soc_id 0x%x", + qmi->chip_info.chip_id, qmi->chip_info.chip_family, + qmi->board_info.board_id, qmi->soc_info.soc_id); + ath10k_info(ar, "qmi fw_version 0x%x fw_build_timestamp %s fw_build_id %s", + qmi->fw_version, qmi->fw_build_timestamp, qmi->fw_build_id); + } kfree(resp); return 0; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2019-03-01 14:50 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-03-01 14:50 Govind Singh [this message] 2019-03-01 14:50 ` [PATCH] ath10k: Move board id and fw version logging to info level Govind Singh 2019-05-07 13:39 ` Kalle Valo 2019-05-07 13:39 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190301145000.22624-1-govinds@codeaurora.org \ --to=govinds@codeaurora.org \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.