All of lore.kernel.org
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Boris Brezillon <bbrezillon@kernel.org>,
	Richard Weinberger <richard@nod.at>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Tudor Ambarus <Tudor.Ambarus@microchip.com>
Cc: Vignesh R <vigneshr@ti.com>,
	Tudor Ambarus <tudor.ambarus@microchip.com>,
	Julien Su <juliensu@mxic.com.tw>,
	Schrempf Frieder <frieder.schrempf@kontron.de>,
	Paul Cercueil <paul@crapouillou.net>,
	linux-mtd@lists.infradead.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Mason Yang <masonccyang@mxic.com.tw>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 12/36] mtd: nand: Move standard OOB layouts to the generic ECC core
Date: Mon,  4 Mar 2019 23:28:17 +0100	[thread overview]
Message-ID: <20190304222841.13899-13-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20190304222841.13899-1-miquel.raynal@bootlin.com>

These OOB layouts are generic to all NAND chips, the should not be
restricted to be used only by raw NAND controller drivers. They might
later be used by generic ECC engines and SPI-NAND devices as well.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/ecc/engine.c       | 161 +++++++++++++++++++++++++++
 drivers/mtd/nand/raw/Kconfig        |   1 +
 drivers/mtd/nand/raw/nand_base.c    | 162 +---------------------------
 drivers/mtd/nand/raw/nand_toshiba.c |   2 +
 include/linux/mtd/nand.h            |   4 +
 include/linux/mtd/rawnand.h         |   3 -
 6 files changed, 170 insertions(+), 163 deletions(-)

diff --git a/drivers/mtd/nand/ecc/engine.c b/drivers/mtd/nand/ecc/engine.c
index 4c7943ddf2cc..f52ffce8e684 100644
--- a/drivers/mtd/nand/ecc/engine.c
+++ b/drivers/mtd/nand/ecc/engine.c
@@ -133,6 +133,167 @@ int nand_ecc_finish_io_req(struct nand_device *nand,
 }
 EXPORT_SYMBOL(nand_ecc_finish_io_req);
 
+/* Define default oob placement schemes for large and small page devices */
+static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	struct nand_device *nand = mtd_to_nanddev(mtd);
+	unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+	if (section > 1)
+		return -ERANGE;
+
+	if (!section) {
+		oobregion->offset = 0;
+		if (mtd->oobsize == 16)
+			oobregion->length = 4;
+		else
+			oobregion->length = 3;
+	} else {
+		if (mtd->oobsize == 8)
+			return -ERANGE;
+
+		oobregion->offset = 6;
+		oobregion->length = total_ecc_bytes - 4;
+	}
+
+	return 0;
+}
+
+static int nand_ooblayout_free_sp(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	if (section > 1)
+		return -ERANGE;
+
+	if (mtd->oobsize == 16) {
+		if (section)
+			return -ERANGE;
+
+		oobregion->length = 8;
+		oobregion->offset = 8;
+	} else {
+		oobregion->length = 2;
+		if (!section)
+			oobregion->offset = 3;
+		else
+			oobregion->offset = 6;
+	}
+
+	return 0;
+}
+
+const struct mtd_ooblayout_ops nand_ooblayout_sp_ops = {
+	.ecc = nand_ooblayout_ecc_sp,
+	.free = nand_ooblayout_free_sp,
+};
+EXPORT_SYMBOL_GPL(nand_ooblayout_sp_ops);
+
+static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	struct nand_device *nand = mtd_to_nanddev(mtd);
+	unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+	if (section || !total_ecc_bytes)
+		return -ERANGE;
+
+	oobregion->length = total_ecc_bytes;
+	oobregion->offset = mtd->oobsize - oobregion->length;
+
+	return 0;
+}
+
+static int nand_ooblayout_free_lp(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	struct nand_device *nand = mtd_to_nanddev(mtd);
+	unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+	if (section)
+		return -ERANGE;
+
+	oobregion->length = mtd->oobsize - total_ecc_bytes - 2;
+	oobregion->offset = 2;
+
+	return 0;
+}
+
+const struct mtd_ooblayout_ops nand_ooblayout_lp_ops = {
+	.ecc = nand_ooblayout_ecc_lp,
+	.free = nand_ooblayout_free_lp,
+};
+EXPORT_SYMBOL_GPL(nand_ooblayout_lp_ops);
+
+/*
+ * Support the old "large page" layout used for 1-bit Hamming ECC where ECC
+ * are placed at a fixed offset.
+ */
+static int nand_ooblayout_ecc_lp_hamming(struct mtd_info *mtd, int section,
+					 struct mtd_oob_region *oobregion)
+{
+	struct nand_device *nand = mtd_to_nanddev(mtd);
+	unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+	if (section)
+		return -ERANGE;
+
+	switch (mtd->oobsize) {
+	case 64:
+		oobregion->offset = 40;
+		break;
+	case 128:
+		oobregion->offset = 80;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	oobregion->length = total_ecc_bytes;
+	if (oobregion->offset + oobregion->length > mtd->oobsize)
+		return -ERANGE;
+
+	return 0;
+}
+
+static int nand_ooblayout_free_lp_hamming(struct mtd_info *mtd, int section,
+					  struct mtd_oob_region *oobregion)
+{
+	struct nand_device *nand = mtd_to_nanddev(mtd);
+	unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+	int ecc_offset = 0;
+
+	if (section < 0 || section > 1)
+		return -ERANGE;
+
+	switch (mtd->oobsize) {
+	case 64:
+		ecc_offset = 40;
+		break;
+	case 128:
+		ecc_offset = 80;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (section == 0) {
+		oobregion->offset = 2;
+		oobregion->length = ecc_offset - 2;
+	} else {
+		oobregion->offset = ecc_offset + total_ecc_bytes;
+		oobregion->length = mtd->oobsize - oobregion->offset;
+	}
+
+	return 0;
+}
+
+const struct mtd_ooblayout_ops nand_ooblayout_lp_hamming_ops = {
+	.ecc = nand_ooblayout_ecc_lp_hamming,
+	.free = nand_ooblayout_free_lp_hamming,
+};
+EXPORT_SYMBOL_GPL(nand_ooblayout_lp_hamming_ops);
+
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>");
 MODULE_DESCRIPTION("Generic ECC engine");
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 952dc50a8634..621991a242c1 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -12,6 +12,7 @@ config MTD_NAND_ECC_SW_HAMMING_SMC
 menuconfig MTD_RAW_NAND
 	tristate "Raw/Parallel NAND Device Support"
 	select MTD_NAND_CORE
+	select MTD_NAND_ECC
 	select MTD_NAND_ECC_SW_HAMMING
 	help
 	  This enables support for accessing all type of raw/parallel
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index b12ca291c7e3..187e6b1fd84d 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -38,6 +38,7 @@
 #include <linux/mm.h>
 #include <linux/types.h>
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/nand_bch.h>
 #include <linux/interrupt.h>
@@ -49,166 +50,6 @@
 
 #include "internals.h"
 
-/* Define default oob placement schemes for large and small page devices */
-static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
-				 struct mtd_oob_region *oobregion)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct nand_ecc_ctrl *ecc = &chip->ecc;
-
-	if (section > 1)
-		return -ERANGE;
-
-	if (!section) {
-		oobregion->offset = 0;
-		if (mtd->oobsize == 16)
-			oobregion->length = 4;
-		else
-			oobregion->length = 3;
-	} else {
-		if (mtd->oobsize == 8)
-			return -ERANGE;
-
-		oobregion->offset = 6;
-		oobregion->length = ecc->total - 4;
-	}
-
-	return 0;
-}
-
-static int nand_ooblayout_free_sp(struct mtd_info *mtd, int section,
-				  struct mtd_oob_region *oobregion)
-{
-	if (section > 1)
-		return -ERANGE;
-
-	if (mtd->oobsize == 16) {
-		if (section)
-			return -ERANGE;
-
-		oobregion->length = 8;
-		oobregion->offset = 8;
-	} else {
-		oobregion->length = 2;
-		if (!section)
-			oobregion->offset = 3;
-		else
-			oobregion->offset = 6;
-	}
-
-	return 0;
-}
-
-const struct mtd_ooblayout_ops nand_ooblayout_sp_ops = {
-	.ecc = nand_ooblayout_ecc_sp,
-	.free = nand_ooblayout_free_sp,
-};
-EXPORT_SYMBOL_GPL(nand_ooblayout_sp_ops);
-
-static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section,
-				 struct mtd_oob_region *oobregion)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct nand_ecc_ctrl *ecc = &chip->ecc;
-
-	if (section || !ecc->total)
-		return -ERANGE;
-
-	oobregion->length = ecc->total;
-	oobregion->offset = mtd->oobsize - oobregion->length;
-
-	return 0;
-}
-
-static int nand_ooblayout_free_lp(struct mtd_info *mtd, int section,
-				  struct mtd_oob_region *oobregion)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct nand_ecc_ctrl *ecc = &chip->ecc;
-
-	if (section)
-		return -ERANGE;
-
-	oobregion->length = mtd->oobsize - ecc->total - 2;
-	oobregion->offset = 2;
-
-	return 0;
-}
-
-const struct mtd_ooblayout_ops nand_ooblayout_lp_ops = {
-	.ecc = nand_ooblayout_ecc_lp,
-	.free = nand_ooblayout_free_lp,
-};
-EXPORT_SYMBOL_GPL(nand_ooblayout_lp_ops);
-
-/*
- * Support the old "large page" layout used for 1-bit Hamming ECC where ECC
- * are placed at a fixed offset.
- */
-static int nand_ooblayout_ecc_lp_hamming(struct mtd_info *mtd, int section,
-					 struct mtd_oob_region *oobregion)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct nand_ecc_ctrl *ecc = &chip->ecc;
-
-	if (section)
-		return -ERANGE;
-
-	switch (mtd->oobsize) {
-	case 64:
-		oobregion->offset = 40;
-		break;
-	case 128:
-		oobregion->offset = 80;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	oobregion->length = ecc->total;
-	if (oobregion->offset + oobregion->length > mtd->oobsize)
-		return -ERANGE;
-
-	return 0;
-}
-
-static int nand_ooblayout_free_lp_hamming(struct mtd_info *mtd, int section,
-					  struct mtd_oob_region *oobregion)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct nand_ecc_ctrl *ecc = &chip->ecc;
-	int ecc_offset = 0;
-
-	if (section < 0 || section > 1)
-		return -ERANGE;
-
-	switch (mtd->oobsize) {
-	case 64:
-		ecc_offset = 40;
-		break;
-	case 128:
-		ecc_offset = 80;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (section == 0) {
-		oobregion->offset = 2;
-		oobregion->length = ecc_offset - 2;
-	} else {
-		oobregion->offset = ecc_offset + ecc->total;
-		oobregion->length = mtd->oobsize - oobregion->offset;
-	}
-
-	return 0;
-}
-
-static const struct mtd_ooblayout_ops nand_ooblayout_lp_hamming_ops = {
-	.ecc = nand_ooblayout_ecc_lp_hamming,
-	.free = nand_ooblayout_free_lp_hamming,
-};
-
 static int check_offs_len(struct nand_chip *chip, loff_t ofs, uint64_t len)
 {
 	int ret = 0;
@@ -5735,6 +5576,7 @@ static int nand_scan_tail(struct nand_chip *chip)
 		goto err_nand_manuf_cleanup;
 	}
 	ecc->total = ecc->steps * ecc->bytes;
+	chip->base.ecc.ctx.total = ecc->total;
 	if (ecc->total > mtd->oobsize) {
 		WARN(1, "Total number of ECC bytes exceeded oobsize\n");
 		ret = -EINVAL;
diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
index f00d958d724f..566cc1a11679 100644
--- a/drivers/mtd/nand/raw/nand_toshiba.c
+++ b/drivers/mtd/nand/raw/nand_toshiba.c
@@ -15,6 +15,8 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/mtd/nand.h>
+
 #include "internals.h"
 
 /* Bit for detecting BENAND */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 45caaa489085..277c0cf822b9 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -122,6 +122,10 @@ struct nand_page_io_req {
 	int mode;
 };
 
+extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops;
+extern const struct mtd_ooblayout_ops nand_ooblayout_lp_ops;
+extern const struct mtd_ooblayout_ops nand_ooblayout_lp_hamming_ops;
+
 /**
  * struct nand_ecc_conf - NAND ECC configuration
  * @provider: ECC engine provider type
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 95b0c7114701..0c2beb6fcf0b 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -1099,9 +1099,6 @@ struct nand_chip {
 	} manufacturer;
 };
 
-extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops;
-extern const struct mtd_ooblayout_ops nand_ooblayout_lp_ops;
-
 static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd)
 {
 	return container_of(mtd, struct nand_chip, base.mtd);
-- 
2.19.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

WARNING: multiple messages have this Message-ID (diff)
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Boris Brezillon <bbrezillon@kernel.org>,
	Richard Weinberger <richard@nod.at>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Tudor Ambarus <Tudor.Ambarus@microchip.com>
Cc: Vignesh R <vigneshr@ti.com>,
	Tudor Ambarus <tudor.ambarus@microchip.com>,
	Julien Su <juliensu@mxic.com.tw>,
	Schrempf Frieder <frieder.schrempf@kontron.de>,
	Paul Cercueil <paul@crapouillou.net>,
	linux-mtd@lists.infradead.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Mason Yang <masonccyang@mxic.com.tw>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 12/36] mtd: nand: Move standard OOB layouts to the generic ECC core
Date: Mon,  4 Mar 2019 23:28:17 +0100	[thread overview]
Message-ID: <20190304222841.13899-13-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20190304222841.13899-1-miquel.raynal@bootlin.com>

These OOB layouts are generic to all NAND chips, the should not be
restricted to be used only by raw NAND controller drivers. They might
later be used by generic ECC engines and SPI-NAND devices as well.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/ecc/engine.c       | 161 +++++++++++++++++++++++++++
 drivers/mtd/nand/raw/Kconfig        |   1 +
 drivers/mtd/nand/raw/nand_base.c    | 162 +---------------------------
 drivers/mtd/nand/raw/nand_toshiba.c |   2 +
 include/linux/mtd/nand.h            |   4 +
 include/linux/mtd/rawnand.h         |   3 -
 6 files changed, 170 insertions(+), 163 deletions(-)

diff --git a/drivers/mtd/nand/ecc/engine.c b/drivers/mtd/nand/ecc/engine.c
index 4c7943ddf2cc..f52ffce8e684 100644
--- a/drivers/mtd/nand/ecc/engine.c
+++ b/drivers/mtd/nand/ecc/engine.c
@@ -133,6 +133,167 @@ int nand_ecc_finish_io_req(struct nand_device *nand,
 }
 EXPORT_SYMBOL(nand_ecc_finish_io_req);
 
+/* Define default oob placement schemes for large and small page devices */
+static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	struct nand_device *nand = mtd_to_nanddev(mtd);
+	unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+	if (section > 1)
+		return -ERANGE;
+
+	if (!section) {
+		oobregion->offset = 0;
+		if (mtd->oobsize == 16)
+			oobregion->length = 4;
+		else
+			oobregion->length = 3;
+	} else {
+		if (mtd->oobsize == 8)
+			return -ERANGE;
+
+		oobregion->offset = 6;
+		oobregion->length = total_ecc_bytes - 4;
+	}
+
+	return 0;
+}
+
+static int nand_ooblayout_free_sp(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	if (section > 1)
+		return -ERANGE;
+
+	if (mtd->oobsize == 16) {
+		if (section)
+			return -ERANGE;
+
+		oobregion->length = 8;
+		oobregion->offset = 8;
+	} else {
+		oobregion->length = 2;
+		if (!section)
+			oobregion->offset = 3;
+		else
+			oobregion->offset = 6;
+	}
+
+	return 0;
+}
+
+const struct mtd_ooblayout_ops nand_ooblayout_sp_ops = {
+	.ecc = nand_ooblayout_ecc_sp,
+	.free = nand_ooblayout_free_sp,
+};
+EXPORT_SYMBOL_GPL(nand_ooblayout_sp_ops);
+
+static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	struct nand_device *nand = mtd_to_nanddev(mtd);
+	unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+	if (section || !total_ecc_bytes)
+		return -ERANGE;
+
+	oobregion->length = total_ecc_bytes;
+	oobregion->offset = mtd->oobsize - oobregion->length;
+
+	return 0;
+}
+
+static int nand_ooblayout_free_lp(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	struct nand_device *nand = mtd_to_nanddev(mtd);
+	unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+	if (section)
+		return -ERANGE;
+
+	oobregion->length = mtd->oobsize - total_ecc_bytes - 2;
+	oobregion->offset = 2;
+
+	return 0;
+}
+
+const struct mtd_ooblayout_ops nand_ooblayout_lp_ops = {
+	.ecc = nand_ooblayout_ecc_lp,
+	.free = nand_ooblayout_free_lp,
+};
+EXPORT_SYMBOL_GPL(nand_ooblayout_lp_ops);
+
+/*
+ * Support the old "large page" layout used for 1-bit Hamming ECC where ECC
+ * are placed at a fixed offset.
+ */
+static int nand_ooblayout_ecc_lp_hamming(struct mtd_info *mtd, int section,
+					 struct mtd_oob_region *oobregion)
+{
+	struct nand_device *nand = mtd_to_nanddev(mtd);
+	unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+	if (section)
+		return -ERANGE;
+
+	switch (mtd->oobsize) {
+	case 64:
+		oobregion->offset = 40;
+		break;
+	case 128:
+		oobregion->offset = 80;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	oobregion->length = total_ecc_bytes;
+	if (oobregion->offset + oobregion->length > mtd->oobsize)
+		return -ERANGE;
+
+	return 0;
+}
+
+static int nand_ooblayout_free_lp_hamming(struct mtd_info *mtd, int section,
+					  struct mtd_oob_region *oobregion)
+{
+	struct nand_device *nand = mtd_to_nanddev(mtd);
+	unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+	int ecc_offset = 0;
+
+	if (section < 0 || section > 1)
+		return -ERANGE;
+
+	switch (mtd->oobsize) {
+	case 64:
+		ecc_offset = 40;
+		break;
+	case 128:
+		ecc_offset = 80;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (section == 0) {
+		oobregion->offset = 2;
+		oobregion->length = ecc_offset - 2;
+	} else {
+		oobregion->offset = ecc_offset + total_ecc_bytes;
+		oobregion->length = mtd->oobsize - oobregion->offset;
+	}
+
+	return 0;
+}
+
+const struct mtd_ooblayout_ops nand_ooblayout_lp_hamming_ops = {
+	.ecc = nand_ooblayout_ecc_lp_hamming,
+	.free = nand_ooblayout_free_lp_hamming,
+};
+EXPORT_SYMBOL_GPL(nand_ooblayout_lp_hamming_ops);
+
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>");
 MODULE_DESCRIPTION("Generic ECC engine");
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 952dc50a8634..621991a242c1 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -12,6 +12,7 @@ config MTD_NAND_ECC_SW_HAMMING_SMC
 menuconfig MTD_RAW_NAND
 	tristate "Raw/Parallel NAND Device Support"
 	select MTD_NAND_CORE
+	select MTD_NAND_ECC
 	select MTD_NAND_ECC_SW_HAMMING
 	help
 	  This enables support for accessing all type of raw/parallel
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index b12ca291c7e3..187e6b1fd84d 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -38,6 +38,7 @@
 #include <linux/mm.h>
 #include <linux/types.h>
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/nand_bch.h>
 #include <linux/interrupt.h>
@@ -49,166 +50,6 @@
 
 #include "internals.h"
 
-/* Define default oob placement schemes for large and small page devices */
-static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
-				 struct mtd_oob_region *oobregion)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct nand_ecc_ctrl *ecc = &chip->ecc;
-
-	if (section > 1)
-		return -ERANGE;
-
-	if (!section) {
-		oobregion->offset = 0;
-		if (mtd->oobsize == 16)
-			oobregion->length = 4;
-		else
-			oobregion->length = 3;
-	} else {
-		if (mtd->oobsize == 8)
-			return -ERANGE;
-
-		oobregion->offset = 6;
-		oobregion->length = ecc->total - 4;
-	}
-
-	return 0;
-}
-
-static int nand_ooblayout_free_sp(struct mtd_info *mtd, int section,
-				  struct mtd_oob_region *oobregion)
-{
-	if (section > 1)
-		return -ERANGE;
-
-	if (mtd->oobsize == 16) {
-		if (section)
-			return -ERANGE;
-
-		oobregion->length = 8;
-		oobregion->offset = 8;
-	} else {
-		oobregion->length = 2;
-		if (!section)
-			oobregion->offset = 3;
-		else
-			oobregion->offset = 6;
-	}
-
-	return 0;
-}
-
-const struct mtd_ooblayout_ops nand_ooblayout_sp_ops = {
-	.ecc = nand_ooblayout_ecc_sp,
-	.free = nand_ooblayout_free_sp,
-};
-EXPORT_SYMBOL_GPL(nand_ooblayout_sp_ops);
-
-static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section,
-				 struct mtd_oob_region *oobregion)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct nand_ecc_ctrl *ecc = &chip->ecc;
-
-	if (section || !ecc->total)
-		return -ERANGE;
-
-	oobregion->length = ecc->total;
-	oobregion->offset = mtd->oobsize - oobregion->length;
-
-	return 0;
-}
-
-static int nand_ooblayout_free_lp(struct mtd_info *mtd, int section,
-				  struct mtd_oob_region *oobregion)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct nand_ecc_ctrl *ecc = &chip->ecc;
-
-	if (section)
-		return -ERANGE;
-
-	oobregion->length = mtd->oobsize - ecc->total - 2;
-	oobregion->offset = 2;
-
-	return 0;
-}
-
-const struct mtd_ooblayout_ops nand_ooblayout_lp_ops = {
-	.ecc = nand_ooblayout_ecc_lp,
-	.free = nand_ooblayout_free_lp,
-};
-EXPORT_SYMBOL_GPL(nand_ooblayout_lp_ops);
-
-/*
- * Support the old "large page" layout used for 1-bit Hamming ECC where ECC
- * are placed at a fixed offset.
- */
-static int nand_ooblayout_ecc_lp_hamming(struct mtd_info *mtd, int section,
-					 struct mtd_oob_region *oobregion)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct nand_ecc_ctrl *ecc = &chip->ecc;
-
-	if (section)
-		return -ERANGE;
-
-	switch (mtd->oobsize) {
-	case 64:
-		oobregion->offset = 40;
-		break;
-	case 128:
-		oobregion->offset = 80;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	oobregion->length = ecc->total;
-	if (oobregion->offset + oobregion->length > mtd->oobsize)
-		return -ERANGE;
-
-	return 0;
-}
-
-static int nand_ooblayout_free_lp_hamming(struct mtd_info *mtd, int section,
-					  struct mtd_oob_region *oobregion)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct nand_ecc_ctrl *ecc = &chip->ecc;
-	int ecc_offset = 0;
-
-	if (section < 0 || section > 1)
-		return -ERANGE;
-
-	switch (mtd->oobsize) {
-	case 64:
-		ecc_offset = 40;
-		break;
-	case 128:
-		ecc_offset = 80;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (section == 0) {
-		oobregion->offset = 2;
-		oobregion->length = ecc_offset - 2;
-	} else {
-		oobregion->offset = ecc_offset + ecc->total;
-		oobregion->length = mtd->oobsize - oobregion->offset;
-	}
-
-	return 0;
-}
-
-static const struct mtd_ooblayout_ops nand_ooblayout_lp_hamming_ops = {
-	.ecc = nand_ooblayout_ecc_lp_hamming,
-	.free = nand_ooblayout_free_lp_hamming,
-};
-
 static int check_offs_len(struct nand_chip *chip, loff_t ofs, uint64_t len)
 {
 	int ret = 0;
@@ -5735,6 +5576,7 @@ static int nand_scan_tail(struct nand_chip *chip)
 		goto err_nand_manuf_cleanup;
 	}
 	ecc->total = ecc->steps * ecc->bytes;
+	chip->base.ecc.ctx.total = ecc->total;
 	if (ecc->total > mtd->oobsize) {
 		WARN(1, "Total number of ECC bytes exceeded oobsize\n");
 		ret = -EINVAL;
diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
index f00d958d724f..566cc1a11679 100644
--- a/drivers/mtd/nand/raw/nand_toshiba.c
+++ b/drivers/mtd/nand/raw/nand_toshiba.c
@@ -15,6 +15,8 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/mtd/nand.h>
+
 #include "internals.h"
 
 /* Bit for detecting BENAND */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 45caaa489085..277c0cf822b9 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -122,6 +122,10 @@ struct nand_page_io_req {
 	int mode;
 };
 
+extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops;
+extern const struct mtd_ooblayout_ops nand_ooblayout_lp_ops;
+extern const struct mtd_ooblayout_ops nand_ooblayout_lp_hamming_ops;
+
 /**
  * struct nand_ecc_conf - NAND ECC configuration
  * @provider: ECC engine provider type
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 95b0c7114701..0c2beb6fcf0b 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -1099,9 +1099,6 @@ struct nand_chip {
 	} manufacturer;
 };
 
-extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops;
-extern const struct mtd_ooblayout_ops nand_ooblayout_lp_ops;
-
 static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd)
 {
 	return container_of(mtd, struct nand_chip, base.mtd);
-- 
2.19.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-03-04 22:49 UTC|newest]

Thread overview: 110+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-04 22:28 [PATCH v2 00/36] Introduce the generic ECC engine abstraction Miquel Raynal
2019-03-04 22:28 ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 01/36] mtd: nand: Move nand_device forward declaration to the top Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-31 11:12   ` Boris Brezillon
2019-03-31 11:12     ` Boris Brezillon
2019-03-04 22:28 ` [PATCH v2 02/36] mtd: nand: Add an extra level in the Kconfig hierarchy Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-31 11:13   ` Boris Brezillon
2019-03-31 11:13     ` Boris Brezillon
2019-03-04 22:28 ` [PATCH v2 03/36] mtd: nand: Drop useless 'depends on' in Kconfig Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-31 11:15   ` Boris Brezillon
2019-03-31 11:15     ` Boris Brezillon
2019-03-04 22:28 ` [PATCH v2 04/36] mtd: rawnand: Use the NAND core Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-31 11:21   ` Boris Brezillon
2019-03-31 11:21     ` Boris Brezillon
2019-03-04 22:28 ` [PATCH v2 05/36] mtd: nand: Add a NAND page I/O request type Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-31 11:23   ` Boris Brezillon
2019-03-31 11:23     ` Boris Brezillon
2019-03-04 22:28 ` [PATCH v2 06/36] mtd: nand: Rename a core structure Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-31 11:30   ` Boris Brezillon
2019-03-31 11:30     ` Boris Brezillon
2019-05-03  8:26     ` Miquel Raynal
2019-05-03  8:26       ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 07/36] mtd: rawnand: Avoid a typedef Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-31 11:55   ` Boris Brezillon
2019-03-31 11:55     ` Boris Brezillon
2019-05-03 12:40     ` Miquel Raynal
2019-05-03 12:40       ` Miquel Raynal
2019-05-03 12:50       ` Boris Brezillon
2019-05-03 12:50         ` Boris Brezillon
2019-05-06 15:13         ` Miquel Raynal
2019-05-06 15:13           ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 08/36] mtd: rawnand: Add an invalid ECC mode to discriminate with valid ones Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 09/36] mtd: rawnand: Clarify the values for invalid ECC mode/algo Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-31 11:57   ` Boris Brezillon
2019-03-31 11:57     ` Boris Brezillon
2019-03-04 22:28 ` [PATCH v2 10/36] mtd: nand: Introduce the ECC engine abstraction Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-31 12:10   ` Boris Brezillon
2019-03-31 12:10     ` Boris Brezillon
2019-05-03 14:34     ` Miquel Raynal
2019-05-03 14:34       ` Miquel Raynal
2019-05-03 15:54       ` Boris Brezillon
2019-05-03 15:54         ` Boris Brezillon
2019-05-06 15:49         ` Miquel Raynal
2019-05-06 15:49           ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 11/36] mtd: Fix typo in mtd_ooblayout_set_databytes() description Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-31 11:32   ` Boris Brezillon
2019-03-31 11:32     ` Boris Brezillon
2019-05-03  8:18     ` Miquel Raynal
2019-05-03  8:18       ` Miquel Raynal
2019-03-04 22:28 ` Miquel Raynal [this message]
2019-03-04 22:28   ` [PATCH v2 12/36] mtd: nand: Move standard OOB layouts to the generic ECC core Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 13/36] mtd: nand: Move ECC specific functions to ecc/engine.c Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 14/36] mtd: nand: ecc: Move BCH code into the ecc/ directory Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 15/36] mtd: nand: ecc: Use SPDX license identifier for the software BCH code Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 16/36] mtd: nand: ecc: Turn the software BCH implementation generic Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 17/36] mtd: rawnand: Get rid of chip->ecc.priv Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 18/36] mtd: nand: ecc: Move Hamming code into the ecc/ directory Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 19/36] mtd: nand: ecc: Use SPDX license identifier for the software Hamming code Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 20/36] mtd: nand: ecc: Clarify the software Hamming introductory line Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 21/36] mtd: nand: ecc: Turn the software Hamming implementation generic Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 22/36] mtd: nand: Remove useless include about software Hamming ECC Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 23/36] mtd: nand: ecc: Let the software BCH ECC engine be a module Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 24/36] mtd: nand: ecc: Let the software Hamming ECC engine be unselected Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 25/36] mtd: nand: ecc: Create the software BCH engine instance Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 26/36] mtd: nand: ecc: Create the software Hamming " Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 27/36] mtd: nand: Let software ECC engines be retrieved from the NAND core Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 28/36] mtd: spinand: Fix typo in comment Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 29/36] mtd: spinand: Move ECC related definitions earlier in the driver Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 30/36] mtd: spinand: Instantiate a SPI-NAND on-die ECC engine Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 31/36] mtd: nand: Let on-die ECC engines be retrieved from the NAND core Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 32/36] mtd: rawnand: Fill a default ECC provider/algorithm Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 33/36] mtd: spinand: " Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 34/36] mtd: nand: Add helpers to manage ECC engines and configurations Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 35/36] mtd: spinand: Use the external ECC engine logic Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal
2019-03-04 22:28 ` [PATCH v2 36/36] mtd: spinand: Propagate ECC information to the MTD structure Miquel Raynal
2019-03-04 22:28   ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190304222841.13899-13-miquel.raynal@bootlin.com \
    --to=miquel.raynal@bootlin.com \
    --cc=Tudor.Ambarus@microchip.com \
    --cc=bbrezillon@kernel.org \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=frieder.schrempf@kontron.de \
    --cc=juliensu@mxic.com.tw \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=masonccyang@mxic.com.tw \
    --cc=paul@crapouillou.net \
    --cc=richard@nod.at \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.