From: Krzysztof Kozlowski <krzk@kernel.org>
To: Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Subject: [PATCH 2/3] ARM: dts: exynos: Add support for UHS-I SD cards on Arndale Octa
Date: Sat, 9 Mar 2019 16:00:38 +0100 [thread overview]
Message-ID: <20190309150039.8705-2-krzk@kernel.org> (raw)
In-Reply-To: <20190309150039.8705-1-krzk@kernel.org>
The Exynos5420's Mobile Storage Host supports SD cards in UHS-I standard
(SD specification v3.0), with 1.8 V signaling in SD UHS DDR50. Adjust
the regulator and add necessary capability properties. Change the SDR
and DDR timings to match values in Insignal v3.4 Android kernel.
Tested with SD UHS-I card in SD UHS DDR50 mode.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 751e772b5710..96a0eb73a99b 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -441,7 +441,7 @@
ldo13_reg: LDO13 {
regulator-name = "PVDD_APIO_MMCOFF_2V8";
- regulator-min-microvolt = <2800000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2800000>;
};
@@ -701,14 +701,17 @@
status = "okay";
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
vmmc-supply = <&ldo19_reg>;
vqmmc-supply = <&ldo13_reg>;
bus-width = <4>;
cap-sd-highspeed;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ sd-uhs-ddr50;
};
&pinctrl_0 {
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Subject: [PATCH 2/3] ARM: dts: exynos: Add support for UHS-I SD cards on Arndale Octa
Date: Sat, 9 Mar 2019 16:00:38 +0100 [thread overview]
Message-ID: <20190309150039.8705-2-krzk@kernel.org> (raw)
In-Reply-To: <20190309150039.8705-1-krzk@kernel.org>
The Exynos5420's Mobile Storage Host supports SD cards in UHS-I standard
(SD specification v3.0), with 1.8 V signaling in SD UHS DDR50. Adjust
the regulator and add necessary capability properties. Change the SDR
and DDR timings to match values in Insignal v3.4 Android kernel.
Tested with SD UHS-I card in SD UHS DDR50 mode.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 751e772b5710..96a0eb73a99b 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -441,7 +441,7 @@
ldo13_reg: LDO13 {
regulator-name = "PVDD_APIO_MMCOFF_2V8";
- regulator-min-microvolt = <2800000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2800000>;
};
@@ -701,14 +701,17 @@
status = "okay";
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
vmmc-supply = <&ldo19_reg>;
vqmmc-supply = <&ldo13_reg>;
bus-width = <4>;
cap-sd-highspeed;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ sd-uhs-ddr50;
};
&pinctrl_0 {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-03-09 15:00 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-09 15:00 [PATCH 1/3] ARM: dts: exynos: Adjust ldo23 and ldo27 to lower levels on Arndale Octa Krzysztof Kozlowski
2019-03-09 15:00 ` Krzysztof Kozlowski
2019-03-09 15:00 ` Krzysztof Kozlowski [this message]
2019-03-09 15:00 ` [PATCH 2/3] ARM: dts: exynos: Add support for UHS-I SD cards " Krzysztof Kozlowski
2019-03-09 15:00 ` [PATCH 3/3] ARM: dts: exynos: Extend the eMMC node " Krzysztof Kozlowski
2019-03-09 15:00 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190309150039.8705-2-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.