From: Daniel Golle <daniel@makrotopia.org>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: linux-oxnas@groups.io, linux-arm-kernel@lists.infradead.org,
linux-pm@vger.kernel.org
Subject: [PATCH v2] power: reset: introduce restart-oxnas
Date: Tue, 12 Mar 2019 01:23:04 +0100 [thread overview]
Message-ID: <20190312002258.GA3902@makrotopia.org> (raw)
In-Reply-To: <973bfe7d-35f3-47c1-b395-fdd4638aac86@baylibre.com>
Add reboot handler for oxnas OX820 chips.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
v2: prepended register defined with with OX820_
renamed handler function to ox820_restart_handle
use syscon_node_to_regmap()
drivers/power/reset/Kconfig | 9 ++
drivers/power/reset/Makefile | 1 +
drivers/power/reset/oxnas-restart.c | 229 ++++++++++++++++++++++++++++
3 files changed, 239 insertions(+)
create mode 100644 drivers/power/reset/oxnas-restart.c
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 6533aa560aa1..6d5f2a3810ed 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -122,6 +122,15 @@ config POWER_RESET_OCELOT_RESET
help
This driver supports restart for Microsemi Ocelot SoC.
+config POWER_RESET_OXNAS
+ bool "OXNAS SoC restart driver"
+ depends on ARM || COMPILE_TEST
+ depends on OF
+ select MFD_SYSCON
+ default ARCH_OXNAS
+ help
+ Restart support for OXNAS OX820 boards.
+
config POWER_RESET_PIIX4_POWEROFF
tristate "Intel PIIX4 power-off driver"
depends on PCI
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 0aebee954ac1..1420a20370a3 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
+obj-$(CONFIG_POWER_RESET_OXNAS) += oxnas-restart.o
obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o
obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
diff --git a/drivers/power/reset/oxnas-restart.c b/drivers/power/reset/oxnas-restart.c
new file mode 100644
index 000000000000..e0c126eae0f5
--- /dev/null
+++ b/drivers/power/reset/oxnas-restart.c
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * oxnas SoC reset driver
+ * based on:
+ * Microsemi MIPS SoC reset driver
+ * and ox820_assert_system_reset() written by Ma Hajun <mahaijuns@gmail.com>
+ *
+ * License: GPL
+ * Copyright (c) 2013 Ma Hajun <mahaijuns@gmail.com>
+ * Copyright (c) 2017 Microsemi Corporation
+ * Copyright (c) 2019 Daniel Golle <daniel@makrotopia.org>
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/notifier.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+/* bit numbers of reset control register */
+#define OX820_SYS_CTRL_RST_SCU 0
+#define OX820_SYS_CTRL_RST_COPRO 1
+#define OX820_SYS_CTRL_RST_ARM0 2
+#define OX820_SYS_CTRL_RST_ARM1 3
+#define OX820_SYS_CTRL_RST_USBHS 4
+#define OX820_SYS_CTRL_RST_USBHSPHYA 5
+#define OX820_SYS_CTRL_RST_MACA 6
+#define OX820_SYS_CTRL_RST_MAC OX820_SYS_CTRL_RST_MACA
+#define OX820_SYS_CTRL_RST_PCIEA 7
+#define OX820_SYS_CTRL_RST_SGDMA 8
+#define OX820_SYS_CTRL_RST_CIPHER 9
+#define OX820_SYS_CTRL_RST_DDR 10
+#define OX820_SYS_CTRL_RST_SATA 11
+#define OX820_SYS_CTRL_RST_SATA_LINK 12
+#define OX820_SYS_CTRL_RST_SATA_PHY 13
+#define OX820_SYS_CTRL_RST_PCIEPHY 14
+#define OX820_SYS_CTRL_RST_STATIC 15
+#define OX820_SYS_CTRL_RST_GPIO 16
+#define OX820_SYS_CTRL_RST_UART1 17
+#define OX820_SYS_CTRL_RST_UART2 18
+#define OX820_SYS_CTRL_RST_MISC 19
+#define OX820_SYS_CTRL_RST_I2S 20
+#define OX820_SYS_CTRL_RST_SD 21
+#define OX820_SYS_CTRL_RST_MACB 22
+#define OX820_SYS_CTRL_RST_PCIEB 23
+#define OX820_SYS_CTRL_RST_VIDEO 24
+#define OX820_SYS_CTRL_RST_DDR_PHY 25
+#define OX820_SYS_CTRL_RST_USBHSPHYB 26
+#define OX820_SYS_CTRL_RST_USBDEV 27
+#define OX820_SYS_CTRL_RST_ARMDBG 29
+#define OX820_SYS_CTRL_RST_PLLA 30
+#define OX820_SYS_CTRL_RST_PLLB 31
+
+/* bit numbers of clock control register */
+#define OX820_SYS_CTRL_CLK_COPRO 0
+#define OX820_SYS_CTRL_CLK_DMA 1
+#define OX820_SYS_CTRL_CLK_CIPHER 2
+#define OX820_SYS_CTRL_CLK_SD 3
+#define OX820_SYS_CTRL_CLK_SATA 4
+#define OX820_SYS_CTRL_CLK_I2S 5
+#define OX820_SYS_CTRL_CLK_USBHS 6
+#define OX820_SYS_CTRL_CLK_MACA 7
+#define OX820_SYS_CTRL_CLK_MAC OX820_SYS_CTRL_CLK_MACA
+#define OX820_SYS_CTRL_CLK_PCIEA 8
+#define OX820_SYS_CTRL_CLK_STATIC 9
+#define OX820_SYS_CTRL_CLK_MACB 10
+#define OX820_SYS_CTRL_CLK_PCIEB 11
+#define OX820_SYS_CTRL_CLK_REF600 12
+#define OX820_SYS_CTRL_CLK_USBDEV 13
+#define OX820_SYS_CTRL_CLK_DDR 14
+#define OX820_SYS_CTRL_CLK_DDRPHY 15
+#define OX820_SYS_CTRL_CLK_DDRCK 16
+
+/* Regmap offsets */
+#define OX820_CLK_SET_REGOFFSET 0x2c
+#define OX820_CLK_CLR_REGOFFSET 0x30
+#define OX820_RST_SET_REGOFFSET 0x34
+#define OX820_RST_CLR_REGOFFSET 0x38
+#define OX820_SECONDARY_SEL_REGOFFSET 0x14
+#define OX820_TERTIARY_SEL_REGOFFSET 0x8c
+#define OX820_QUATERNARY_SEL_REGOFFSET 0x94
+#define OX820_DEBUG_SEL_REGOFFSET 0x9c
+#define OX820_ALTERNATIVE_SEL_REGOFFSET 0xa4
+#define OX820_PULLUP_SEL_REGOFFSET 0xac
+#define OX820_SEC_SECONDARY_SEL_REGOFFSET 0x100014
+#define OX820_SEC_TERTIARY_SEL_REGOFFSET 0x10008c
+#define OX820_SEC_QUATERNARY_SEL_REGOFFSET 0x100094
+#define OX820_SEC_DEBUG_SEL_REGOFFSET 0x10009c
+#define OX820_SEC_ALTERNATIVE_SEL_REGOFFSET 0x1000a4
+#define OX820_SEC_PULLUP_SEL_REGOFFSET 0x1000ac
+
+
+struct oxnas_restart_context {
+ struct regmap *sys_ctrl;
+ struct notifier_block restart_handler;
+};
+
+static int ox820_restart_handle(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ struct oxnas_restart_context *ctx = container_of(this, struct
+ oxnas_restart_context,
+ restart_handler);
+ u32 value;
+
+ /* Assert reset to cores as per power on defaults
+ * Don't touch the DDR interface as things will come to an impromptu stop
+ * NB Possibly should be asserting reset for PLLB, but there are timing
+ * concerns here according to the docs */
+ value = BIT(OX820_SYS_CTRL_RST_COPRO) |
+ BIT(OX820_SYS_CTRL_RST_USBHS) |
+ BIT(OX820_SYS_CTRL_RST_USBHSPHYA) |
+ BIT(OX820_SYS_CTRL_RST_MACA) |
+ BIT(OX820_SYS_CTRL_RST_PCIEA) |
+ BIT(OX820_SYS_CTRL_RST_SGDMA) |
+ BIT(OX820_SYS_CTRL_RST_CIPHER) |
+ BIT(OX820_SYS_CTRL_RST_SATA) |
+ BIT(OX820_SYS_CTRL_RST_SATA_LINK) |
+ BIT(OX820_SYS_CTRL_RST_SATA_PHY) |
+ BIT(OX820_SYS_CTRL_RST_PCIEPHY) |
+ BIT(OX820_SYS_CTRL_RST_STATIC) |
+ BIT(OX820_SYS_CTRL_RST_UART1) |
+ BIT(OX820_SYS_CTRL_RST_UART2) |
+ BIT(OX820_SYS_CTRL_RST_MISC) |
+ BIT(OX820_SYS_CTRL_RST_I2S) |
+ BIT(OX820_SYS_CTRL_RST_SD) |
+ BIT(OX820_SYS_CTRL_RST_MACB) |
+ BIT(OX820_SYS_CTRL_RST_PCIEB) |
+ BIT(OX820_SYS_CTRL_RST_VIDEO) |
+ BIT(OX820_SYS_CTRL_RST_USBHSPHYB) |
+ BIT(OX820_SYS_CTRL_RST_USBDEV);
+
+ regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value);
+
+ /* Release reset to cores as per power on defaults */
+ regmap_write(ctx->sys_ctrl, OX820_RST_CLR_REGOFFSET, BIT(OX820_SYS_CTRL_RST_GPIO));
+
+ /* Disable clocks to cores as per power-on defaults - must leave DDR
+ * related clocks enabled otherwise we'll stop rather abruptly. */
+ value =
+ BIT(OX820_SYS_CTRL_CLK_COPRO) |
+ BIT(OX820_SYS_CTRL_CLK_DMA) |
+ BIT(OX820_SYS_CTRL_CLK_CIPHER) |
+ BIT(OX820_SYS_CTRL_CLK_SD) |
+ BIT(OX820_SYS_CTRL_CLK_SATA) |
+ BIT(OX820_SYS_CTRL_CLK_I2S) |
+ BIT(OX820_SYS_CTRL_CLK_USBHS) |
+ BIT(OX820_SYS_CTRL_CLK_MAC) |
+ BIT(OX820_SYS_CTRL_CLK_PCIEA) |
+ BIT(OX820_SYS_CTRL_CLK_STATIC) |
+ BIT(OX820_SYS_CTRL_CLK_MACB) |
+ BIT(OX820_SYS_CTRL_CLK_PCIEB) |
+ BIT(OX820_SYS_CTRL_CLK_REF600) |
+ BIT(OX820_SYS_CTRL_CLK_USBDEV);
+
+ regmap_write(ctx->sys_ctrl, OX820_CLK_CLR_REGOFFSET, value);
+
+ /* Enable clocks to cores as per power-on defaults */
+
+ /* Set sys-control pin mux'ing as per power-on defaults */
+ regmap_write(ctx->sys_ctrl, OX820_SECONDARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_TERTIARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_QUATERNARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_DEBUG_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_ALTERNATIVE_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_PULLUP_SEL_REGOFFSET, 0);
+
+ regmap_write(ctx->sys_ctrl, OX820_SEC_SECONDARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_SEC_TERTIARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_SEC_QUATERNARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_SEC_DEBUG_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_SEC_ALTERNATIVE_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_SEC_PULLUP_SEL_REGOFFSET, 0);
+
+ /* No need to save any state, as the ROM loader can determine whether
+ * reset is due to power cycling or programatic action, just hit the
+ * (self-clearing) CPU reset bit of the block reset register */
+ value =
+ BIT(OX820_SYS_CTRL_RST_SCU) |
+ BIT(OX820_SYS_CTRL_RST_ARM0) |
+ BIT(OX820_SYS_CTRL_RST_ARM1);
+
+ regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value);
+
+ pr_emerg("Unable to restart system\n");
+ return NOTIFY_DONE;
+}
+
+static int ox820_restart_probe(struct platform_device *pdev)
+{
+ struct oxnas_restart_context *ctx;
+ struct regmap *sys_ctrl;
+ struct device *dev = &pdev->dev;
+ int err = 0;
+
+ sys_ctrl = syscon_node_to_regmap(pdev->dev.of_node);
+ if (IS_ERR(sys_ctrl))
+ return PTR_ERR(sys_ctrl);
+
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->sys_ctrl = sys_ctrl;
+ ctx->restart_handler.notifier_call = ox820_restart_handle;
+ ctx->restart_handler.priority = 192;
+ err = register_restart_handler(&ctx->restart_handler);
+ if (err)
+ dev_err(dev, "can't register restart notifier (err=%d)\n", err);
+
+ return err;
+}
+
+static const struct of_device_id ox820_restart_of_match[] = {
+ { .compatible = "oxsemi,ox820-sys-ctrl" },
+ {}
+};
+
+static struct platform_driver ox820_restart_driver = {
+ .probe = ox820_restart_probe,
+ .driver = {
+ .name = "ox820-chip-reset",
+ .of_match_table = ox820_restart_of_match,
+ },
+};
+builtin_platform_driver(ox820_restart_driver);
--
2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Daniel Golle <daniel@makrotopia.org>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: linux-oxnas@groups.io, linux-arm-kernel@lists.infradead.org,
linux-pm@vger.kernel.org
Subject: [PATCH v2] power: reset: introduce restart-oxnas
Date: Tue, 12 Mar 2019 01:23:04 +0100 [thread overview]
Message-ID: <20190312002258.GA3902@makrotopia.org> (raw)
In-Reply-To: <973bfe7d-35f3-47c1-b395-fdd4638aac86@baylibre.com>
Add reboot handler for oxnas OX820 chips.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
v2: prepended register defined with with OX820_
renamed handler function to ox820_restart_handle
use syscon_node_to_regmap()
drivers/power/reset/Kconfig | 9 ++
drivers/power/reset/Makefile | 1 +
drivers/power/reset/oxnas-restart.c | 229 ++++++++++++++++++++++++++++
3 files changed, 239 insertions(+)
create mode 100644 drivers/power/reset/oxnas-restart.c
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 6533aa560aa1..6d5f2a3810ed 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -122,6 +122,15 @@ config POWER_RESET_OCELOT_RESET
help
This driver supports restart for Microsemi Ocelot SoC.
+config POWER_RESET_OXNAS
+ bool "OXNAS SoC restart driver"
+ depends on ARM || COMPILE_TEST
+ depends on OF
+ select MFD_SYSCON
+ default ARCH_OXNAS
+ help
+ Restart support for OXNAS OX820 boards.
+
config POWER_RESET_PIIX4_POWEROFF
tristate "Intel PIIX4 power-off driver"
depends on PCI
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 0aebee954ac1..1420a20370a3 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
+obj-$(CONFIG_POWER_RESET_OXNAS) += oxnas-restart.o
obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o
obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
diff --git a/drivers/power/reset/oxnas-restart.c b/drivers/power/reset/oxnas-restart.c
new file mode 100644
index 000000000000..e0c126eae0f5
--- /dev/null
+++ b/drivers/power/reset/oxnas-restart.c
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * oxnas SoC reset driver
+ * based on:
+ * Microsemi MIPS SoC reset driver
+ * and ox820_assert_system_reset() written by Ma Hajun <mahaijuns@gmail.com>
+ *
+ * License: GPL
+ * Copyright (c) 2013 Ma Hajun <mahaijuns@gmail.com>
+ * Copyright (c) 2017 Microsemi Corporation
+ * Copyright (c) 2019 Daniel Golle <daniel@makrotopia.org>
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/notifier.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+/* bit numbers of reset control register */
+#define OX820_SYS_CTRL_RST_SCU 0
+#define OX820_SYS_CTRL_RST_COPRO 1
+#define OX820_SYS_CTRL_RST_ARM0 2
+#define OX820_SYS_CTRL_RST_ARM1 3
+#define OX820_SYS_CTRL_RST_USBHS 4
+#define OX820_SYS_CTRL_RST_USBHSPHYA 5
+#define OX820_SYS_CTRL_RST_MACA 6
+#define OX820_SYS_CTRL_RST_MAC OX820_SYS_CTRL_RST_MACA
+#define OX820_SYS_CTRL_RST_PCIEA 7
+#define OX820_SYS_CTRL_RST_SGDMA 8
+#define OX820_SYS_CTRL_RST_CIPHER 9
+#define OX820_SYS_CTRL_RST_DDR 10
+#define OX820_SYS_CTRL_RST_SATA 11
+#define OX820_SYS_CTRL_RST_SATA_LINK 12
+#define OX820_SYS_CTRL_RST_SATA_PHY 13
+#define OX820_SYS_CTRL_RST_PCIEPHY 14
+#define OX820_SYS_CTRL_RST_STATIC 15
+#define OX820_SYS_CTRL_RST_GPIO 16
+#define OX820_SYS_CTRL_RST_UART1 17
+#define OX820_SYS_CTRL_RST_UART2 18
+#define OX820_SYS_CTRL_RST_MISC 19
+#define OX820_SYS_CTRL_RST_I2S 20
+#define OX820_SYS_CTRL_RST_SD 21
+#define OX820_SYS_CTRL_RST_MACB 22
+#define OX820_SYS_CTRL_RST_PCIEB 23
+#define OX820_SYS_CTRL_RST_VIDEO 24
+#define OX820_SYS_CTRL_RST_DDR_PHY 25
+#define OX820_SYS_CTRL_RST_USBHSPHYB 26
+#define OX820_SYS_CTRL_RST_USBDEV 27
+#define OX820_SYS_CTRL_RST_ARMDBG 29
+#define OX820_SYS_CTRL_RST_PLLA 30
+#define OX820_SYS_CTRL_RST_PLLB 31
+
+/* bit numbers of clock control register */
+#define OX820_SYS_CTRL_CLK_COPRO 0
+#define OX820_SYS_CTRL_CLK_DMA 1
+#define OX820_SYS_CTRL_CLK_CIPHER 2
+#define OX820_SYS_CTRL_CLK_SD 3
+#define OX820_SYS_CTRL_CLK_SATA 4
+#define OX820_SYS_CTRL_CLK_I2S 5
+#define OX820_SYS_CTRL_CLK_USBHS 6
+#define OX820_SYS_CTRL_CLK_MACA 7
+#define OX820_SYS_CTRL_CLK_MAC OX820_SYS_CTRL_CLK_MACA
+#define OX820_SYS_CTRL_CLK_PCIEA 8
+#define OX820_SYS_CTRL_CLK_STATIC 9
+#define OX820_SYS_CTRL_CLK_MACB 10
+#define OX820_SYS_CTRL_CLK_PCIEB 11
+#define OX820_SYS_CTRL_CLK_REF600 12
+#define OX820_SYS_CTRL_CLK_USBDEV 13
+#define OX820_SYS_CTRL_CLK_DDR 14
+#define OX820_SYS_CTRL_CLK_DDRPHY 15
+#define OX820_SYS_CTRL_CLK_DDRCK 16
+
+/* Regmap offsets */
+#define OX820_CLK_SET_REGOFFSET 0x2c
+#define OX820_CLK_CLR_REGOFFSET 0x30
+#define OX820_RST_SET_REGOFFSET 0x34
+#define OX820_RST_CLR_REGOFFSET 0x38
+#define OX820_SECONDARY_SEL_REGOFFSET 0x14
+#define OX820_TERTIARY_SEL_REGOFFSET 0x8c
+#define OX820_QUATERNARY_SEL_REGOFFSET 0x94
+#define OX820_DEBUG_SEL_REGOFFSET 0x9c
+#define OX820_ALTERNATIVE_SEL_REGOFFSET 0xa4
+#define OX820_PULLUP_SEL_REGOFFSET 0xac
+#define OX820_SEC_SECONDARY_SEL_REGOFFSET 0x100014
+#define OX820_SEC_TERTIARY_SEL_REGOFFSET 0x10008c
+#define OX820_SEC_QUATERNARY_SEL_REGOFFSET 0x100094
+#define OX820_SEC_DEBUG_SEL_REGOFFSET 0x10009c
+#define OX820_SEC_ALTERNATIVE_SEL_REGOFFSET 0x1000a4
+#define OX820_SEC_PULLUP_SEL_REGOFFSET 0x1000ac
+
+
+struct oxnas_restart_context {
+ struct regmap *sys_ctrl;
+ struct notifier_block restart_handler;
+};
+
+static int ox820_restart_handle(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ struct oxnas_restart_context *ctx = container_of(this, struct
+ oxnas_restart_context,
+ restart_handler);
+ u32 value;
+
+ /* Assert reset to cores as per power on defaults
+ * Don't touch the DDR interface as things will come to an impromptu stop
+ * NB Possibly should be asserting reset for PLLB, but there are timing
+ * concerns here according to the docs */
+ value = BIT(OX820_SYS_CTRL_RST_COPRO) |
+ BIT(OX820_SYS_CTRL_RST_USBHS) |
+ BIT(OX820_SYS_CTRL_RST_USBHSPHYA) |
+ BIT(OX820_SYS_CTRL_RST_MACA) |
+ BIT(OX820_SYS_CTRL_RST_PCIEA) |
+ BIT(OX820_SYS_CTRL_RST_SGDMA) |
+ BIT(OX820_SYS_CTRL_RST_CIPHER) |
+ BIT(OX820_SYS_CTRL_RST_SATA) |
+ BIT(OX820_SYS_CTRL_RST_SATA_LINK) |
+ BIT(OX820_SYS_CTRL_RST_SATA_PHY) |
+ BIT(OX820_SYS_CTRL_RST_PCIEPHY) |
+ BIT(OX820_SYS_CTRL_RST_STATIC) |
+ BIT(OX820_SYS_CTRL_RST_UART1) |
+ BIT(OX820_SYS_CTRL_RST_UART2) |
+ BIT(OX820_SYS_CTRL_RST_MISC) |
+ BIT(OX820_SYS_CTRL_RST_I2S) |
+ BIT(OX820_SYS_CTRL_RST_SD) |
+ BIT(OX820_SYS_CTRL_RST_MACB) |
+ BIT(OX820_SYS_CTRL_RST_PCIEB) |
+ BIT(OX820_SYS_CTRL_RST_VIDEO) |
+ BIT(OX820_SYS_CTRL_RST_USBHSPHYB) |
+ BIT(OX820_SYS_CTRL_RST_USBDEV);
+
+ regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value);
+
+ /* Release reset to cores as per power on defaults */
+ regmap_write(ctx->sys_ctrl, OX820_RST_CLR_REGOFFSET, BIT(OX820_SYS_CTRL_RST_GPIO));
+
+ /* Disable clocks to cores as per power-on defaults - must leave DDR
+ * related clocks enabled otherwise we'll stop rather abruptly. */
+ value =
+ BIT(OX820_SYS_CTRL_CLK_COPRO) |
+ BIT(OX820_SYS_CTRL_CLK_DMA) |
+ BIT(OX820_SYS_CTRL_CLK_CIPHER) |
+ BIT(OX820_SYS_CTRL_CLK_SD) |
+ BIT(OX820_SYS_CTRL_CLK_SATA) |
+ BIT(OX820_SYS_CTRL_CLK_I2S) |
+ BIT(OX820_SYS_CTRL_CLK_USBHS) |
+ BIT(OX820_SYS_CTRL_CLK_MAC) |
+ BIT(OX820_SYS_CTRL_CLK_PCIEA) |
+ BIT(OX820_SYS_CTRL_CLK_STATIC) |
+ BIT(OX820_SYS_CTRL_CLK_MACB) |
+ BIT(OX820_SYS_CTRL_CLK_PCIEB) |
+ BIT(OX820_SYS_CTRL_CLK_REF600) |
+ BIT(OX820_SYS_CTRL_CLK_USBDEV);
+
+ regmap_write(ctx->sys_ctrl, OX820_CLK_CLR_REGOFFSET, value);
+
+ /* Enable clocks to cores as per power-on defaults */
+
+ /* Set sys-control pin mux'ing as per power-on defaults */
+ regmap_write(ctx->sys_ctrl, OX820_SECONDARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_TERTIARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_QUATERNARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_DEBUG_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_ALTERNATIVE_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_PULLUP_SEL_REGOFFSET, 0);
+
+ regmap_write(ctx->sys_ctrl, OX820_SEC_SECONDARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_SEC_TERTIARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_SEC_QUATERNARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_SEC_DEBUG_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_SEC_ALTERNATIVE_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_SEC_PULLUP_SEL_REGOFFSET, 0);
+
+ /* No need to save any state, as the ROM loader can determine whether
+ * reset is due to power cycling or programatic action, just hit the
+ * (self-clearing) CPU reset bit of the block reset register */
+ value =
+ BIT(OX820_SYS_CTRL_RST_SCU) |
+ BIT(OX820_SYS_CTRL_RST_ARM0) |
+ BIT(OX820_SYS_CTRL_RST_ARM1);
+
+ regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value);
+
+ pr_emerg("Unable to restart system\n");
+ return NOTIFY_DONE;
+}
+
+static int ox820_restart_probe(struct platform_device *pdev)
+{
+ struct oxnas_restart_context *ctx;
+ struct regmap *sys_ctrl;
+ struct device *dev = &pdev->dev;
+ int err = 0;
+
+ sys_ctrl = syscon_node_to_regmap(pdev->dev.of_node);
+ if (IS_ERR(sys_ctrl))
+ return PTR_ERR(sys_ctrl);
+
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->sys_ctrl = sys_ctrl;
+ ctx->restart_handler.notifier_call = ox820_restart_handle;
+ ctx->restart_handler.priority = 192;
+ err = register_restart_handler(&ctx->restart_handler);
+ if (err)
+ dev_err(dev, "can't register restart notifier (err=%d)\n", err);
+
+ return err;
+}
+
+static const struct of_device_id ox820_restart_of_match[] = {
+ { .compatible = "oxsemi,ox820-sys-ctrl" },
+ {}
+};
+
+static struct platform_driver ox820_restart_driver = {
+ .probe = ox820_restart_probe,
+ .driver = {
+ .name = "ox820-chip-reset",
+ .of_match_table = ox820_restart_of_match,
+ },
+};
+builtin_platform_driver(ox820_restart_driver);
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-03-12 0:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-03 16:32 [PATCH] power: reset: introduce oxnas-restart Daniel Golle
2019-03-03 16:32 ` Daniel Golle
2019-03-11 10:09 ` Neil Armstrong
2019-03-11 10:09 ` Neil Armstrong
2019-03-12 0:23 ` Daniel Golle [this message]
2019-03-12 0:23 ` [PATCH v2] power: reset: introduce restart-oxnas Daniel Golle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190312002258.GA3902@makrotopia.org \
--to=daniel@makrotopia.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-oxnas@groups.io \
--cc=linux-pm@vger.kernel.org \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.