From: Alexandre Belloni <alexandre.belloni@bootlin.com> To: linux-rtc@vger.kernel.org Cc: Keerthy <j-keerthy@ti.com>, linux-arm-kernel@lists.infradead.org, Alexandre Belloni <alexandre.belloni@bootlin.com> Subject: [PATCH] rtc: omap: let the core handle range Date: Mon, 18 Mar 2019 13:44:38 +0100 [thread overview] Message-ID: <20190318124438.26327-2-alexandre.belloni@bootlin.com> (raw) In-Reply-To: <20190318124438.26327-1-alexandre.belloni@bootlin.com> Let the core handle the RTC range instead of open coding it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> --- drivers/rtc/rtc-omap.c | 22 ++++++---------------- 1 file changed, 6 insertions(+), 16 deletions(-) diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index bbff0e2deb84..ea0eb48f3bb9 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -271,7 +271,7 @@ static int omap_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) } /* this hardware doesn't support "don't care" alarm fields */ -static int tm2bcd(struct rtc_time *tm) +static void tm2bcd(struct rtc_time *tm) { tm->tm_sec = bin2bcd(tm->tm_sec); tm->tm_min = bin2bcd(tm->tm_min); @@ -279,13 +279,7 @@ static int tm2bcd(struct rtc_time *tm) tm->tm_mday = bin2bcd(tm->tm_mday); tm->tm_mon = bin2bcd(tm->tm_mon + 1); - - /* epoch == 1900 */ - if (tm->tm_year < 100 || tm->tm_year > 199) - return -EINVAL; tm->tm_year = bin2bcd(tm->tm_year - 100); - - return 0; } static void bcd2tm(struct rtc_time *tm) @@ -328,8 +322,7 @@ static int omap_rtc_set_time(struct device *dev, struct rtc_time *tm) { struct omap_rtc *rtc = dev_get_drvdata(dev); - if (tm2bcd(tm) < 0) - return -EINVAL; + tm2bcd(tm); local_irq_disable(); rtc_wait_not_busy(rtc); @@ -378,8 +371,7 @@ static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) struct omap_rtc *rtc = dev_get_drvdata(dev); u8 reg, irqwake_reg = 0; - if (tm2bcd(&alm->time) < 0) - return -EINVAL; + tm2bcd(&alm->time); local_irq_disable(); rtc_wait_not_busy(rtc); @@ -444,11 +436,7 @@ static void omap_rtc_power_off(void) rtc_tm_to_time(&tm, &now); rtc_time_to_tm(now + 1, &tm); - if (tm2bcd(&tm) < 0) { - dev_err(&rtc->rtc->dev, "power off failed\n"); - rtc->type->lock(rtc); - return; - } + tm2bcd(&tm); rtc_wait_not_busy(rtc); @@ -845,6 +833,8 @@ static int omap_rtc_probe(struct platform_device *pdev) } rtc->rtc->ops = &omap_rtc_ops; + rtc->rtc->range_min = RTC_TIMESTAMP_BEGIN_1900; + rtc->rtc->range_max = RTC_TIMESTAMP_END_2099; omap_rtc_nvmem_config.priv = rtc; /* handle periodic and alarm irqs */ -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni@bootlin.com> To: linux-rtc@vger.kernel.org Cc: Keerthy <j-keerthy@ti.com>, Alexandre Belloni <alexandre.belloni@bootlin.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH] rtc: omap: let the core handle range Date: Mon, 18 Mar 2019 13:44:38 +0100 [thread overview] Message-ID: <20190318124438.26327-2-alexandre.belloni@bootlin.com> (raw) In-Reply-To: <20190318124438.26327-1-alexandre.belloni@bootlin.com> Let the core handle the RTC range instead of open coding it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> --- drivers/rtc/rtc-omap.c | 22 ++++++---------------- 1 file changed, 6 insertions(+), 16 deletions(-) diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index bbff0e2deb84..ea0eb48f3bb9 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -271,7 +271,7 @@ static int omap_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) } /* this hardware doesn't support "don't care" alarm fields */ -static int tm2bcd(struct rtc_time *tm) +static void tm2bcd(struct rtc_time *tm) { tm->tm_sec = bin2bcd(tm->tm_sec); tm->tm_min = bin2bcd(tm->tm_min); @@ -279,13 +279,7 @@ static int tm2bcd(struct rtc_time *tm) tm->tm_mday = bin2bcd(tm->tm_mday); tm->tm_mon = bin2bcd(tm->tm_mon + 1); - - /* epoch == 1900 */ - if (tm->tm_year < 100 || tm->tm_year > 199) - return -EINVAL; tm->tm_year = bin2bcd(tm->tm_year - 100); - - return 0; } static void bcd2tm(struct rtc_time *tm) @@ -328,8 +322,7 @@ static int omap_rtc_set_time(struct device *dev, struct rtc_time *tm) { struct omap_rtc *rtc = dev_get_drvdata(dev); - if (tm2bcd(tm) < 0) - return -EINVAL; + tm2bcd(tm); local_irq_disable(); rtc_wait_not_busy(rtc); @@ -378,8 +371,7 @@ static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) struct omap_rtc *rtc = dev_get_drvdata(dev); u8 reg, irqwake_reg = 0; - if (tm2bcd(&alm->time) < 0) - return -EINVAL; + tm2bcd(&alm->time); local_irq_disable(); rtc_wait_not_busy(rtc); @@ -444,11 +436,7 @@ static void omap_rtc_power_off(void) rtc_tm_to_time(&tm, &now); rtc_time_to_tm(now + 1, &tm); - if (tm2bcd(&tm) < 0) { - dev_err(&rtc->rtc->dev, "power off failed\n"); - rtc->type->lock(rtc); - return; - } + tm2bcd(&tm); rtc_wait_not_busy(rtc); @@ -845,6 +833,8 @@ static int omap_rtc_probe(struct platform_device *pdev) } rtc->rtc->ops = &omap_rtc_ops; + rtc->rtc->range_min = RTC_TIMESTAMP_BEGIN_1900; + rtc->rtc->range_max = RTC_TIMESTAMP_END_2099; omap_rtc_nvmem_config.priv = rtc; /* handle periodic and alarm irqs */ -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-03-18 12:44 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-03-18 12:44 [PATCH] rtc: omap: let the core handle range Alexandre Belloni 2019-03-18 12:44 ` Alexandre Belloni 2019-03-18 12:44 ` Alexandre Belloni [this message] 2019-03-18 12:44 ` Alexandre Belloni 2019-03-20 4:50 ` Keerthy 2019-03-20 4:50 ` Keerthy 2019-03-20 5:10 ` Alexandre Belloni 2019-03-20 5:10 ` Alexandre Belloni 2019-03-20 5:30 ` Keerthy 2019-03-20 5:30 ` Keerthy 2019-03-20 5:55 ` Keerthy 2019-03-20 5:55 ` Keerthy 2019-03-20 6:08 ` Alexandre Belloni 2019-03-20 6:08 ` Alexandre Belloni 2019-03-20 6:18 ` Keerthy 2019-03-20 6:18 ` Keerthy
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190318124438.26327-2-alexandre.belloni@bootlin.com \ --to=alexandre.belloni@bootlin.com \ --cc=j-keerthy@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-rtc@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.