All of lore.kernel.org
 help / color / mirror / Atom feed
From: Weiyi Lu <weiyi.lu@mediatek.com>
To: Nicolas Boichat <drinkcat@chromium.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Rob Herring <robh@kernel.org>
Cc: James Liao <jamesjj.liao@mediatek.com>,
	Fan Chen <fan.chen@mediatek.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-mediatek@lists.infradead.org>,
	<srv_heupstream@mediatek.com>, Weiyi Lu <weiyi.lu@mediatek.com>
Subject: [PATCH v5 11/14] soc: mediatek: Add subsys clock control for bus protection
Date: Tue, 19 Mar 2019 16:01:37 +0800	[thread overview]
Message-ID: <20190319080140.24055-12-weiyi.lu@mediatek.com> (raw)
In-Reply-To: <20190319080140.24055-1-weiyi.lu@mediatek.com>

Add subsys CG control flow before/after the bus protect control
due to bus protection need SMI bus relative CGs enabled to feedback
its ack.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 drivers/soc/mediatek/mtk-scpsys.c | 72 ++++++++++++++++++++++++++++++-
 1 file changed, 70 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index 181bf7bce591..356ca2626b36 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -108,6 +108,7 @@ static const char * const clk_names[] = {
 };
 
 #define MAX_CLKS	3
+#define MAX_SUBSYS_CLKS 10
 
 /**
  * struct scp_domain_data - scp domain data for power on/off flow
@@ -121,6 +122,8 @@ static const char * const clk_names[] = {
  *          power domains.
  * @basic_clk_name: provide the same purpose with field "clk_id"
  *                  by declaring basic clock prefix name rather than clk_id.
+ * @subsys_clk_prefix: The prefix name of the clocks need to be enabled
+ *                     before releasing bus protection.
  * @caps: The flag for active wake-up action.
  * @bp_table: The mask table for multiple step bus protection.
  */
@@ -133,6 +136,7 @@ struct scp_domain_data {
 	u32 bus_prot_mask;
 	enum clk_id clk_id[MAX_CLKS];
 	const char *basic_clk_name[MAX_CLKS];
+	const char *subsys_clk_prefix;
 	u8 caps;
 	struct bus_prot bp_table[MAX_STEPS];
 };
@@ -143,6 +147,7 @@ struct scp_domain {
 	struct generic_pm_domain genpd;
 	struct scp *scp;
 	struct clk *clk[MAX_CLKS];
+	struct clk *subsys_clk[MAX_SUBSYS_CLKS];
 	const struct scp_domain_data *data;
 	struct regulator *supply;
 };
@@ -361,16 +366,22 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
 	val |= PWR_RST_B_BIT;
 	writel(val, ctl_addr);
 
-	ret = scpsys_sram_enable(scpd, ctl_addr);
+	ret = scpsys_clk_enable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
 	if (ret < 0)
 		goto err_pwr_ack;
 
+	ret = scpsys_sram_enable(scpd, ctl_addr);
+	if (ret < 0)
+		goto err_sram;
+
 	ret = scpsys_bus_protect_disable(scpd);
 	if (ret < 0)
-		goto err_pwr_ack;
+		goto err_sram;
 
 	return 0;
 
+err_sram:
+	scpsys_clk_disable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
 err_pwr_ack:
 	scpsys_clk_disable(scpd->clk, MAX_CLKS);
 err_clk:
@@ -397,6 +408,8 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 	if (ret < 0)
 		goto out;
 
+	scpsys_clk_disable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
+
 	/* subsys power off */
 	val = readl(ctl_addr) | PWR_ISO_BIT;
 	writel(val, ctl_addr);
@@ -433,6 +446,48 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 	return ret;
 }
 
+static int init_subsys_clks(struct platform_device *pdev,
+		const char *prefix, struct clk **clk)
+{
+	struct device_node *node = pdev->dev.of_node;
+	u32 prefix_len, sub_clk_cnt = 0;
+	struct property *prop;
+	const char *clk_name;
+
+	if (!node) {
+		dev_err(&pdev->dev, "Cannot find scpsys node: %ld\n",
+			PTR_ERR(node));
+		return PTR_ERR(node);
+	}
+
+	prefix_len = strlen(prefix);
+
+	of_property_for_each_string(node, "clock-names", prop, clk_name) {
+		if (!strncmp(clk_name, prefix, prefix_len) &&
+				(clk_name[prefix_len] == '-')) {
+			if (sub_clk_cnt >= MAX_SUBSYS_CLKS) {
+				dev_err(&pdev->dev,
+					"subsys clk out of range %d\n",
+					sub_clk_cnt);
+				return -ENOMEM;
+			}
+
+			clk[sub_clk_cnt] = devm_clk_get(&pdev->dev,
+						clk_name);
+
+			if (IS_ERR(clk)) {
+				dev_err(&pdev->dev,
+					"Subsys clk read fail %ld\n",
+					PTR_ERR(clk));
+				return PTR_ERR(clk);
+			}
+			sub_clk_cnt++;
+		}
+	}
+
+	return sub_clk_cnt;
+}
+
 static void init_clks(struct platform_device *pdev, struct clk **clk)
 {
 	int i;
@@ -520,6 +575,7 @@ static struct scp *init_scp(struct platform_device *pdev,
 		struct scp_domain *scpd = &scp->domains[i];
 		struct generic_pm_domain *genpd = &scpd->genpd;
 		const struct scp_domain_data *data = &scp_domain_data[i];
+		int clk_cnt;
 
 		pd_data->domains[i] = genpd;
 		scpd->scp = scp;
@@ -546,6 +602,18 @@ static struct scp *init_scp(struct platform_device *pdev,
 						data->basic_clk_name[j]);
 		}
 
+		if (data->subsys_clk_prefix) {
+			clk_cnt = init_subsys_clks(pdev,
+					data->subsys_clk_prefix,
+					scpd->subsys_clk);
+			if (clk_cnt < 0) {
+				dev_err(&pdev->dev,
+					"%s: subsys clk unavailable\n",
+					data->name);
+				return ERR_PTR(clk_cnt);
+			}
+		}
+
 		genpd->name = data->name;
 		genpd->power_off = scpsys_power_off;
 		genpd->power_on = scpsys_power_on;
-- 
2.18.0


WARNING: multiple messages have this Message-ID (diff)
From: Weiyi Lu <weiyi.lu@mediatek.com>
To: Nicolas Boichat <drinkcat@chromium.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Rob Herring <robh@kernel.org>
Cc: James Liao <jamesjj.liao@mediatek.com>,
	Fan Chen <fan.chen@mediatek.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
	srv_heupstream@mediatek.com, Weiyi Lu <weiyi.lu@mediatek.com>
Subject: [PATCH v5 11/14] soc: mediatek: Add subsys clock control for bus protection
Date: Tue, 19 Mar 2019 16:01:37 +0800	[thread overview]
Message-ID: <20190319080140.24055-12-weiyi.lu@mediatek.com> (raw)
In-Reply-To: <20190319080140.24055-1-weiyi.lu@mediatek.com>

Add subsys CG control flow before/after the bus protect control
due to bus protection need SMI bus relative CGs enabled to feedback
its ack.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 drivers/soc/mediatek/mtk-scpsys.c | 72 ++++++++++++++++++++++++++++++-
 1 file changed, 70 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index 181bf7bce591..356ca2626b36 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -108,6 +108,7 @@ static const char * const clk_names[] = {
 };
 
 #define MAX_CLKS	3
+#define MAX_SUBSYS_CLKS 10
 
 /**
  * struct scp_domain_data - scp domain data for power on/off flow
@@ -121,6 +122,8 @@ static const char * const clk_names[] = {
  *          power domains.
  * @basic_clk_name: provide the same purpose with field "clk_id"
  *                  by declaring basic clock prefix name rather than clk_id.
+ * @subsys_clk_prefix: The prefix name of the clocks need to be enabled
+ *                     before releasing bus protection.
  * @caps: The flag for active wake-up action.
  * @bp_table: The mask table for multiple step bus protection.
  */
@@ -133,6 +136,7 @@ struct scp_domain_data {
 	u32 bus_prot_mask;
 	enum clk_id clk_id[MAX_CLKS];
 	const char *basic_clk_name[MAX_CLKS];
+	const char *subsys_clk_prefix;
 	u8 caps;
 	struct bus_prot bp_table[MAX_STEPS];
 };
@@ -143,6 +147,7 @@ struct scp_domain {
 	struct generic_pm_domain genpd;
 	struct scp *scp;
 	struct clk *clk[MAX_CLKS];
+	struct clk *subsys_clk[MAX_SUBSYS_CLKS];
 	const struct scp_domain_data *data;
 	struct regulator *supply;
 };
@@ -361,16 +366,22 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
 	val |= PWR_RST_B_BIT;
 	writel(val, ctl_addr);
 
-	ret = scpsys_sram_enable(scpd, ctl_addr);
+	ret = scpsys_clk_enable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
 	if (ret < 0)
 		goto err_pwr_ack;
 
+	ret = scpsys_sram_enable(scpd, ctl_addr);
+	if (ret < 0)
+		goto err_sram;
+
 	ret = scpsys_bus_protect_disable(scpd);
 	if (ret < 0)
-		goto err_pwr_ack;
+		goto err_sram;
 
 	return 0;
 
+err_sram:
+	scpsys_clk_disable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
 err_pwr_ack:
 	scpsys_clk_disable(scpd->clk, MAX_CLKS);
 err_clk:
@@ -397,6 +408,8 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 	if (ret < 0)
 		goto out;
 
+	scpsys_clk_disable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
+
 	/* subsys power off */
 	val = readl(ctl_addr) | PWR_ISO_BIT;
 	writel(val, ctl_addr);
@@ -433,6 +446,48 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 	return ret;
 }
 
+static int init_subsys_clks(struct platform_device *pdev,
+		const char *prefix, struct clk **clk)
+{
+	struct device_node *node = pdev->dev.of_node;
+	u32 prefix_len, sub_clk_cnt = 0;
+	struct property *prop;
+	const char *clk_name;
+
+	if (!node) {
+		dev_err(&pdev->dev, "Cannot find scpsys node: %ld\n",
+			PTR_ERR(node));
+		return PTR_ERR(node);
+	}
+
+	prefix_len = strlen(prefix);
+
+	of_property_for_each_string(node, "clock-names", prop, clk_name) {
+		if (!strncmp(clk_name, prefix, prefix_len) &&
+				(clk_name[prefix_len] == '-')) {
+			if (sub_clk_cnt >= MAX_SUBSYS_CLKS) {
+				dev_err(&pdev->dev,
+					"subsys clk out of range %d\n",
+					sub_clk_cnt);
+				return -ENOMEM;
+			}
+
+			clk[sub_clk_cnt] = devm_clk_get(&pdev->dev,
+						clk_name);
+
+			if (IS_ERR(clk)) {
+				dev_err(&pdev->dev,
+					"Subsys clk read fail %ld\n",
+					PTR_ERR(clk));
+				return PTR_ERR(clk);
+			}
+			sub_clk_cnt++;
+		}
+	}
+
+	return sub_clk_cnt;
+}
+
 static void init_clks(struct platform_device *pdev, struct clk **clk)
 {
 	int i;
@@ -520,6 +575,7 @@ static struct scp *init_scp(struct platform_device *pdev,
 		struct scp_domain *scpd = &scp->domains[i];
 		struct generic_pm_domain *genpd = &scpd->genpd;
 		const struct scp_domain_data *data = &scp_domain_data[i];
+		int clk_cnt;
 
 		pd_data->domains[i] = genpd;
 		scpd->scp = scp;
@@ -546,6 +602,18 @@ static struct scp *init_scp(struct platform_device *pdev,
 						data->basic_clk_name[j]);
 		}
 
+		if (data->subsys_clk_prefix) {
+			clk_cnt = init_subsys_clks(pdev,
+					data->subsys_clk_prefix,
+					scpd->subsys_clk);
+			if (clk_cnt < 0) {
+				dev_err(&pdev->dev,
+					"%s: subsys clk unavailable\n",
+					data->name);
+				return ERR_PTR(clk_cnt);
+			}
+		}
+
 		genpd->name = data->name;
 		genpd->power_off = scpsys_power_off;
 		genpd->power_on = scpsys_power_on;
-- 
2.18.0

WARNING: multiple messages have this Message-ID (diff)
From: Weiyi Lu <weiyi.lu@mediatek.com>
To: Nicolas Boichat <drinkcat@chromium.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Rob Herring <robh@kernel.org>
Cc: James Liao <jamesjj.liao@mediatek.com>,
	Weiyi Lu <weiyi.lu@mediatek.com>,
	srv_heupstream@mediatek.com, linux-kernel@vger.kernel.org,
	Fan Chen <fan.chen@mediatek.com>,
	linux-mediatek@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 11/14] soc: mediatek: Add subsys clock control for bus protection
Date: Tue, 19 Mar 2019 16:01:37 +0800	[thread overview]
Message-ID: <20190319080140.24055-12-weiyi.lu@mediatek.com> (raw)
In-Reply-To: <20190319080140.24055-1-weiyi.lu@mediatek.com>

Add subsys CG control flow before/after the bus protect control
due to bus protection need SMI bus relative CGs enabled to feedback
its ack.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 drivers/soc/mediatek/mtk-scpsys.c | 72 ++++++++++++++++++++++++++++++-
 1 file changed, 70 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index 181bf7bce591..356ca2626b36 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -108,6 +108,7 @@ static const char * const clk_names[] = {
 };
 
 #define MAX_CLKS	3
+#define MAX_SUBSYS_CLKS 10
 
 /**
  * struct scp_domain_data - scp domain data for power on/off flow
@@ -121,6 +122,8 @@ static const char * const clk_names[] = {
  *          power domains.
  * @basic_clk_name: provide the same purpose with field "clk_id"
  *                  by declaring basic clock prefix name rather than clk_id.
+ * @subsys_clk_prefix: The prefix name of the clocks need to be enabled
+ *                     before releasing bus protection.
  * @caps: The flag for active wake-up action.
  * @bp_table: The mask table for multiple step bus protection.
  */
@@ -133,6 +136,7 @@ struct scp_domain_data {
 	u32 bus_prot_mask;
 	enum clk_id clk_id[MAX_CLKS];
 	const char *basic_clk_name[MAX_CLKS];
+	const char *subsys_clk_prefix;
 	u8 caps;
 	struct bus_prot bp_table[MAX_STEPS];
 };
@@ -143,6 +147,7 @@ struct scp_domain {
 	struct generic_pm_domain genpd;
 	struct scp *scp;
 	struct clk *clk[MAX_CLKS];
+	struct clk *subsys_clk[MAX_SUBSYS_CLKS];
 	const struct scp_domain_data *data;
 	struct regulator *supply;
 };
@@ -361,16 +366,22 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
 	val |= PWR_RST_B_BIT;
 	writel(val, ctl_addr);
 
-	ret = scpsys_sram_enable(scpd, ctl_addr);
+	ret = scpsys_clk_enable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
 	if (ret < 0)
 		goto err_pwr_ack;
 
+	ret = scpsys_sram_enable(scpd, ctl_addr);
+	if (ret < 0)
+		goto err_sram;
+
 	ret = scpsys_bus_protect_disable(scpd);
 	if (ret < 0)
-		goto err_pwr_ack;
+		goto err_sram;
 
 	return 0;
 
+err_sram:
+	scpsys_clk_disable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
 err_pwr_ack:
 	scpsys_clk_disable(scpd->clk, MAX_CLKS);
 err_clk:
@@ -397,6 +408,8 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 	if (ret < 0)
 		goto out;
 
+	scpsys_clk_disable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
+
 	/* subsys power off */
 	val = readl(ctl_addr) | PWR_ISO_BIT;
 	writel(val, ctl_addr);
@@ -433,6 +446,48 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 	return ret;
 }
 
+static int init_subsys_clks(struct platform_device *pdev,
+		const char *prefix, struct clk **clk)
+{
+	struct device_node *node = pdev->dev.of_node;
+	u32 prefix_len, sub_clk_cnt = 0;
+	struct property *prop;
+	const char *clk_name;
+
+	if (!node) {
+		dev_err(&pdev->dev, "Cannot find scpsys node: %ld\n",
+			PTR_ERR(node));
+		return PTR_ERR(node);
+	}
+
+	prefix_len = strlen(prefix);
+
+	of_property_for_each_string(node, "clock-names", prop, clk_name) {
+		if (!strncmp(clk_name, prefix, prefix_len) &&
+				(clk_name[prefix_len] == '-')) {
+			if (sub_clk_cnt >= MAX_SUBSYS_CLKS) {
+				dev_err(&pdev->dev,
+					"subsys clk out of range %d\n",
+					sub_clk_cnt);
+				return -ENOMEM;
+			}
+
+			clk[sub_clk_cnt] = devm_clk_get(&pdev->dev,
+						clk_name);
+
+			if (IS_ERR(clk)) {
+				dev_err(&pdev->dev,
+					"Subsys clk read fail %ld\n",
+					PTR_ERR(clk));
+				return PTR_ERR(clk);
+			}
+			sub_clk_cnt++;
+		}
+	}
+
+	return sub_clk_cnt;
+}
+
 static void init_clks(struct platform_device *pdev, struct clk **clk)
 {
 	int i;
@@ -520,6 +575,7 @@ static struct scp *init_scp(struct platform_device *pdev,
 		struct scp_domain *scpd = &scp->domains[i];
 		struct generic_pm_domain *genpd = &scpd->genpd;
 		const struct scp_domain_data *data = &scp_domain_data[i];
+		int clk_cnt;
 
 		pd_data->domains[i] = genpd;
 		scpd->scp = scp;
@@ -546,6 +602,18 @@ static struct scp *init_scp(struct platform_device *pdev,
 						data->basic_clk_name[j]);
 		}
 
+		if (data->subsys_clk_prefix) {
+			clk_cnt = init_subsys_clks(pdev,
+					data->subsys_clk_prefix,
+					scpd->subsys_clk);
+			if (clk_cnt < 0) {
+				dev_err(&pdev->dev,
+					"%s: subsys clk unavailable\n",
+					data->name);
+				return ERR_PTR(clk_cnt);
+			}
+		}
+
 		genpd->name = data->name;
 		genpd->power_off = scpsys_power_off;
 		genpd->power_on = scpsys_power_on;
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-03-19  8:02 UTC|newest]

Thread overview: 81+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-19  8:01 [PATCH v5 00/14] Mediatek MT8183 scpsys support Weiyi Lu
2019-03-19  8:01 ` Weiyi Lu
2019-03-19  8:01 ` Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 01/14] dt-bindings: mediatek: Add property to mt8183 smi-common Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 02/14] dt-bindings: soc: Add MT8183 power dt-bindings Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 03/14] soc: mediatek: Switch to SPDX license identifier Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 04/14] soc: mediatek: Refactor polling timeout and documentation Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19 11:45   ` Nicolas Boichat
2019-03-19 11:45     ` Nicolas Boichat
2019-03-19 11:45     ` Nicolas Boichat
2019-06-19  9:11     ` Weiyi Lu
2019-06-19  9:11       ` Weiyi Lu
2019-06-19  9:11       ` Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 05/14] soc: mediatek: Refactor regulator control Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 06/14] soc: mediatek: Refactor clock control Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19 12:02   ` Nicolas Boichat
2019-03-19 12:02     ` Nicolas Boichat
2019-03-19 12:02     ` Nicolas Boichat
2019-06-19  9:19     ` Weiyi Lu
2019-06-19  9:19       ` Weiyi Lu
2019-06-19  9:19       ` Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 07/14] soc: mediatek: Refactor sram control Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19 12:07   ` Nicolas Boichat
2019-03-19 12:07     ` Nicolas Boichat
2019-03-19 12:07     ` Nicolas Boichat
2019-06-19  9:30     ` Weiyi Lu
2019-06-19  9:30       ` Weiyi Lu
2019-06-19  9:30       ` Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 08/14] soc: mediatek: Refactor bus protection control Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19 12:09   ` Nicolas Boichat
2019-03-19 12:09     ` Nicolas Boichat
2019-03-19 12:09     ` Nicolas Boichat
2019-06-19  9:31     ` Weiyi Lu
2019-06-19  9:31       ` Weiyi Lu
2019-06-19  9:31       ` Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 09/14] soc: mediatek: Add basic_clk_name to scp_power_data Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-21  6:02   ` Nicolas Boichat
2019-03-21  6:02     ` Nicolas Boichat
2019-03-21  6:02     ` Nicolas Boichat
2019-06-19  9:36     ` Weiyi Lu
2019-06-19  9:36       ` Weiyi Lu
2019-06-19  9:36       ` Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 10/14] soc: mediatek: Add multiple step bus protection control Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-21  5:57   ` Nicolas Boichat
2019-03-21  5:57     ` Nicolas Boichat
2019-03-21  5:57     ` Nicolas Boichat
2019-06-19  9:43     ` Weiyi Lu
2019-06-19  9:43       ` Weiyi Lu
2019-06-19  9:43       ` Weiyi Lu
2019-03-19  8:01 ` Weiyi Lu [this message]
2019-03-19  8:01   ` [PATCH v5 11/14] soc: mediatek: Add subsys clock control for bus protection Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 12/14] soc: mediatek: Add extra sram control Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 13/14] soc: mediatek: Add MT8183 scpsys support Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19  8:01 ` [PATCH v5 14/14] arm64: dts: Add power controller device node of MT8183 Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu
2019-03-19  8:01   ` Weiyi Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190319080140.24055-12-weiyi.lu@mediatek.com \
    --to=weiyi.lu@mediatek.com \
    --cc=drinkcat@chromium.org \
    --cc=fan.chen@mediatek.com \
    --cc=jamesjj.liao@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=robh@kernel.org \
    --cc=srv_heupstream@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.