All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Shawn Guo <shawnguo@kernel.org>
Cc: Gavin Schenk <g.schenk@eckelmann.de>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	Fabio Estevam <festevam@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 2/3] ARM: dts: Add devicetree for Eckelmann ci4x10
Date: Wed, 20 Mar 2019 10:12:53 +0100	[thread overview]
Message-ID: <20190320091254.10043-3-u.kleine-koenig@pengutronix.de> (raw)
In-Reply-To: <20190320091254.10043-1-u.kleine-koenig@pengutronix.de>

This is one of two boards that make use of the recently introduced SIOX
bus. Apart from the devices described in the dts it features a display
with touch that I didn't include here because it needs some non-mainline
change to operate correctly.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts | 381 ++++++++++++++++++
 2 files changed, 382 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f4f5aeaf3298..3332dbf2a979 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -400,6 +400,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-cubox-i-emmc-som-v15.dtb \
 	imx6dl-cubox-i-som-v15.dtb \
 	imx6dl-dfi-fs700-m60.dtb \
+	imx6dl-eckelmann-ci4x10.dtb \
 	imx6dl-emcon-avari.dtb \
 	imx6dl-gw51xx.dtb \
 	imx6dl-gw52xx.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
new file mode 100644
index 000000000000..9eb2b73951b2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 Eckelmann AG.
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx6dl.dtsi"
+
+/ {
+	model = "Eckelmann CI 4X10 Board";
+	compatible = "eckelmann,imx6dl-ci4x10", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	rmii_clk: clock-rmii {
+		/* This clock is provided by the phy (KSZ8091RNB) */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	siox {
+		compatible = "eckelmann,siox-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_siox>;
+		din-gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
+		dout-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+		dclk-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
+		dld-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "everspin,mr25h256";
+		reg = <0>;
+		spi-max-frequency = <15000000>;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&gpio2 {
+	gpio-line-names = "buzzer", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "", "", "", "", "in2",
+			  "prio2", "prio1", "aux", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "in1",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	temperature-sensor@49 {
+		compatible = "ad,ad7414";
+		reg = <0x49>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf2127";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hog {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x00000018 /* buzzer */
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x00000018 /* OUT_1 */
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x00000018 /* OUT_2 */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x00000018 /* OUT_3 */
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x00000000 /* In1 */
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x00000000 /* In2 */
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x00000018 /* unused watchdog pin */
+			MX6QDL_PAD_SD1_DAT2__GPIO1_IO19		0x00000018 /* unused watchdog pin */
+
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 	0x000100a0
+			MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI	0x000100a0
+			MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO	0x000100a0
+			MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25	0x000100a0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x000100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x000100b1
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x000100b1
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x0001b098
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x0001b098
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x0001b098
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x0001b098
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x0001b098
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x0001b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x0001b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x0001b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x0001b0b0
+			MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0x00000018
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x0001b020
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x0001b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x0001b020
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			/* without SION i2c doesn't detect bus busy */
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b820
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b820
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x00000018
+		>;
+	};
+
+	pinctrl_reg_usb_h1_vbus: reg_usb_h1_vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x0001b0b0
+		>;
+	};
+
+	pinctrl_siox: sioxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x0001b010	/* DIN */
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x0001b010	/* DOUT */
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x0001b010	/* DCLK */
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x0001b010	/* DLD */
+		>;
+	};
+
+	pinctrl_uart1_dte: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA	0x0001b010
+			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA	0x0001b010
+			MX6QDL_PAD_EIM_D19__UART1_RTS_B 	0x0001b010
+			MX6QDL_PAD_EIM_D20__UART1_CTS_B 	0x0001b010
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x0001b010	/* DCD */
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24		0x0001b010	/* DTR */
+			MX6QDL_PAD_EIM_D25__GPIO3_IO25		0x0001b010	/* DSR */
+		>;
+	};
+
+	pinctrl_uart2_dte: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x0001b010
+			MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x0001b010
+			MX6QDL_PAD_EIM_D28__UART2_RTS_B 	0x0001b010
+			MX6QDL_PAD_EIM_D29__UART2_CTS_B 	0x0001b010
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x0001b010	/* DCD */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x0001b010	/* DTR */
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x0001b010	/* DSR */
+		>;
+	};
+
+	pinctrl_uart3_dce: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__UART3_RX_DATA	0x0001b010
+			MX6QDL_PAD_SD4_CMD__UART3_TX_DATA	0x0001b010
+		>;
+	};
+
+	pinctrl_uart4_dce: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x0001b010
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x0001b010
+			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x0001b010
+		>;
+	};
+
+	pinctrl_uart5_dce: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x0001b010
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x0001b010
+			MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05	0x0001b010	/* RTS */
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__USB_H1_OC		0x0001b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x00017059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x00010059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x00017059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x00017059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x00017059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x00017059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x00017059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x00017059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x00017059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x00017059
+		>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy>;
+	clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_dte>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+	dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_dte>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+	dcd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	dtr-gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_dce>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4_dce>;
+	rts-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5_dce>;
+	rts-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-03-20  9:13 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-20  9:12 [PATCH v4 0/3] Add support for Eckelmann ci4x10 Uwe Kleine-König
2019-03-20  9:12 ` [PATCH v4 1/3] dt-bindings: arm: fsl: Add devicetree binding " Uwe Kleine-König
2019-03-24 21:21   ` Rob Herring
2019-03-20  9:12 ` Uwe Kleine-König [this message]
2019-03-20  9:12 ` [PATCH v4 3/3] ARM: imx_v6_v7_defconfig: Enable SIOX bus Uwe Kleine-König
2019-03-26  8:30 ` [PATCH v4 0/3] Add support for Eckelmann ci4x10 Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190320091254.10043-3-u.kleine-koenig@pengutronix.de \
    --to=u.kleine-koenig@pengutronix.de \
    --cc=fabio.estevam@nxp.com \
    --cc=festevam@gmail.com \
    --cc=g.schenk@eckelmann.de \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.