From: Neil Armstrong <narmstrong@baylibre.com>
To: dri-devel@lists.freedesktop.org
Cc: Neil Armstrong <narmstrong@baylibre.com>,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 08/11] drm/meson: Add G12A support for CVBS Encoer
Date: Mon, 25 Mar 2019 15:18:21 +0100 [thread overview]
Message-ID: <20190325141824.21259-9-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190325141824.21259-1-narmstrong@baylibre.com>
The Meson G12A SoCs uses the exact same CVBS encoder except a simple
CVBS DAC register offset and settings delta.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_venc.c | 11 +++++++++--
drivers/gpu/drm/meson/meson_venc_cvbs.c | 25 ++++++++++++++++++-------
2 files changed, 27 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_venc.c b/drivers/gpu/drm/meson/meson_venc.c
index 66d73a932d19..6faca7313339 100644
--- a/drivers/gpu/drm/meson/meson_venc.c
+++ b/drivers/gpu/drm/meson/meson_venc.c
@@ -73,7 +73,9 @@
/* HHI Registers */
#define HHI_GCLK_MPEG2 0x148 /* 0x52 offset in data sheet */
#define HHI_VDAC_CNTL0 0x2F4 /* 0xbd offset in data sheet */
+#define HHI_VDAC_CNTL0_G12A 0x2EC /* 0xbd offset in data sheet */
#define HHI_VDAC_CNTL1 0x2F8 /* 0xbe offset in data sheet */
+#define HHI_VDAC_CNTL1_G12A 0x2F0 /* 0xbe offset in data sheet */
#define HHI_HDMI_PHY_CNTL0 0x3a0 /* 0xe8 offset in data sheet */
struct meson_cvbs_enci_mode meson_cvbs_enci_pal = {
@@ -1675,8 +1677,13 @@ void meson_venc_disable_vsync(struct meson_drm *priv)
void meson_venc_init(struct meson_drm *priv)
{
/* Disable CVBS VDAC */
- regmap_write(priv->hhi, HHI_VDAC_CNTL0, 0);
- regmap_write(priv->hhi, HHI_VDAC_CNTL1, 8);
+ if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
+ regmap_write(priv->hhi, HHI_VDAC_CNTL0_G12A, 0);
+ regmap_write(priv->hhi, HHI_VDAC_CNTL1_G12A, 8);
+ } else {
+ regmap_write(priv->hhi, HHI_VDAC_CNTL0, 0);
+ regmap_write(priv->hhi, HHI_VDAC_CNTL1, 8);
+ }
/* Power Down Dacs */
writel_relaxed(0xff, priv->io_base + _REG(VENC_VDAC_SETTING));
diff --git a/drivers/gpu/drm/meson/meson_venc_cvbs.c b/drivers/gpu/drm/meson/meson_venc_cvbs.c
index d622d817b6df..2c5341c881c4 100644
--- a/drivers/gpu/drm/meson/meson_venc_cvbs.c
+++ b/drivers/gpu/drm/meson/meson_venc_cvbs.c
@@ -37,7 +37,9 @@
/* HHI VDAC Registers */
#define HHI_VDAC_CNTL0 0x2F4 /* 0xbd offset in data sheet */
+#define HHI_VDAC_CNTL0_G12A 0x2EC /* 0xbd offset in data sheet */
#define HHI_VDAC_CNTL1 0x2F8 /* 0xbe offset in data sheet */
+#define HHI_VDAC_CNTL1_G12A 0x2F0 /* 0xbe offset in data sheet */
struct meson_venc_cvbs {
struct drm_encoder encoder;
@@ -166,8 +168,13 @@ static void meson_venc_cvbs_encoder_disable(struct drm_encoder *encoder)
struct meson_drm *priv = meson_venc_cvbs->priv;
/* Disable CVBS VDAC */
- regmap_write(priv->hhi, HHI_VDAC_CNTL0, 0);
- regmap_write(priv->hhi, HHI_VDAC_CNTL1, 8);
+ if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
+ regmap_write(priv->hhi, HHI_VDAC_CNTL0_G12A, 0);
+ regmap_write(priv->hhi, HHI_VDAC_CNTL1_G12A, 0);
+ } else {
+ regmap_write(priv->hhi, HHI_VDAC_CNTL0, 0);
+ regmap_write(priv->hhi, HHI_VDAC_CNTL1, 8);
+ }
}
static void meson_venc_cvbs_encoder_enable(struct drm_encoder *encoder)
@@ -179,13 +186,17 @@ static void meson_venc_cvbs_encoder_enable(struct drm_encoder *encoder)
/* VDAC0 source is not from ATV */
writel_bits_relaxed(BIT(5), 0, priv->io_base + _REG(VENC_VDAC_DACSEL0));
- if (meson_vpu_is_compatible(priv, "amlogic,meson-gxbb-vpu"))
+ if (meson_vpu_is_compatible(priv, "amlogic,meson-gxbb-vpu")) {
regmap_write(priv->hhi, HHI_VDAC_CNTL0, 1);
- else if (meson_vpu_is_compatible(priv, "amlogic,meson-gxm-vpu") ||
- meson_vpu_is_compatible(priv, "amlogic,meson-gxl-vpu"))
+ regmap_write(priv->hhi, HHI_VDAC_CNTL1, 0);
+ } else if (meson_vpu_is_compatible(priv, "amlogic,meson-gxm-vpu") ||
+ meson_vpu_is_compatible(priv, "amlogic,meson-gxl-vpu")) {
regmap_write(priv->hhi, HHI_VDAC_CNTL0, 0xf0001);
-
- regmap_write(priv->hhi, HHI_VDAC_CNTL1, 0);
+ regmap_write(priv->hhi, HHI_VDAC_CNTL1, 0);
+ } else if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
+ regmap_write(priv->hhi, HHI_VDAC_CNTL0_G12A, 0x906001);
+ regmap_write(priv->hhi, HHI_VDAC_CNTL1_G12A, 0);
+ }
}
static void meson_venc_cvbs_encoder_mode_set(struct drm_encoder *encoder,
--
2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: dri-devel@lists.freedesktop.org
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 08/11] drm/meson: Add G12A support for CVBS Encoer
Date: Mon, 25 Mar 2019 15:18:21 +0100 [thread overview]
Message-ID: <20190325141824.21259-9-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190325141824.21259-1-narmstrong@baylibre.com>
The Meson G12A SoCs uses the exact same CVBS encoder except a simple
CVBS DAC register offset and settings delta.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_venc.c | 11 +++++++++--
drivers/gpu/drm/meson/meson_venc_cvbs.c | 25 ++++++++++++++++++-------
2 files changed, 27 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_venc.c b/drivers/gpu/drm/meson/meson_venc.c
index 66d73a932d19..6faca7313339 100644
--- a/drivers/gpu/drm/meson/meson_venc.c
+++ b/drivers/gpu/drm/meson/meson_venc.c
@@ -73,7 +73,9 @@
/* HHI Registers */
#define HHI_GCLK_MPEG2 0x148 /* 0x52 offset in data sheet */
#define HHI_VDAC_CNTL0 0x2F4 /* 0xbd offset in data sheet */
+#define HHI_VDAC_CNTL0_G12A 0x2EC /* 0xbd offset in data sheet */
#define HHI_VDAC_CNTL1 0x2F8 /* 0xbe offset in data sheet */
+#define HHI_VDAC_CNTL1_G12A 0x2F0 /* 0xbe offset in data sheet */
#define HHI_HDMI_PHY_CNTL0 0x3a0 /* 0xe8 offset in data sheet */
struct meson_cvbs_enci_mode meson_cvbs_enci_pal = {
@@ -1675,8 +1677,13 @@ void meson_venc_disable_vsync(struct meson_drm *priv)
void meson_venc_init(struct meson_drm *priv)
{
/* Disable CVBS VDAC */
- regmap_write(priv->hhi, HHI_VDAC_CNTL0, 0);
- regmap_write(priv->hhi, HHI_VDAC_CNTL1, 8);
+ if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
+ regmap_write(priv->hhi, HHI_VDAC_CNTL0_G12A, 0);
+ regmap_write(priv->hhi, HHI_VDAC_CNTL1_G12A, 8);
+ } else {
+ regmap_write(priv->hhi, HHI_VDAC_CNTL0, 0);
+ regmap_write(priv->hhi, HHI_VDAC_CNTL1, 8);
+ }
/* Power Down Dacs */
writel_relaxed(0xff, priv->io_base + _REG(VENC_VDAC_SETTING));
diff --git a/drivers/gpu/drm/meson/meson_venc_cvbs.c b/drivers/gpu/drm/meson/meson_venc_cvbs.c
index d622d817b6df..2c5341c881c4 100644
--- a/drivers/gpu/drm/meson/meson_venc_cvbs.c
+++ b/drivers/gpu/drm/meson/meson_venc_cvbs.c
@@ -37,7 +37,9 @@
/* HHI VDAC Registers */
#define HHI_VDAC_CNTL0 0x2F4 /* 0xbd offset in data sheet */
+#define HHI_VDAC_CNTL0_G12A 0x2EC /* 0xbd offset in data sheet */
#define HHI_VDAC_CNTL1 0x2F8 /* 0xbe offset in data sheet */
+#define HHI_VDAC_CNTL1_G12A 0x2F0 /* 0xbe offset in data sheet */
struct meson_venc_cvbs {
struct drm_encoder encoder;
@@ -166,8 +168,13 @@ static void meson_venc_cvbs_encoder_disable(struct drm_encoder *encoder)
struct meson_drm *priv = meson_venc_cvbs->priv;
/* Disable CVBS VDAC */
- regmap_write(priv->hhi, HHI_VDAC_CNTL0, 0);
- regmap_write(priv->hhi, HHI_VDAC_CNTL1, 8);
+ if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
+ regmap_write(priv->hhi, HHI_VDAC_CNTL0_G12A, 0);
+ regmap_write(priv->hhi, HHI_VDAC_CNTL1_G12A, 0);
+ } else {
+ regmap_write(priv->hhi, HHI_VDAC_CNTL0, 0);
+ regmap_write(priv->hhi, HHI_VDAC_CNTL1, 8);
+ }
}
static void meson_venc_cvbs_encoder_enable(struct drm_encoder *encoder)
@@ -179,13 +186,17 @@ static void meson_venc_cvbs_encoder_enable(struct drm_encoder *encoder)
/* VDAC0 source is not from ATV */
writel_bits_relaxed(BIT(5), 0, priv->io_base + _REG(VENC_VDAC_DACSEL0));
- if (meson_vpu_is_compatible(priv, "amlogic,meson-gxbb-vpu"))
+ if (meson_vpu_is_compatible(priv, "amlogic,meson-gxbb-vpu")) {
regmap_write(priv->hhi, HHI_VDAC_CNTL0, 1);
- else if (meson_vpu_is_compatible(priv, "amlogic,meson-gxm-vpu") ||
- meson_vpu_is_compatible(priv, "amlogic,meson-gxl-vpu"))
+ regmap_write(priv->hhi, HHI_VDAC_CNTL1, 0);
+ } else if (meson_vpu_is_compatible(priv, "amlogic,meson-gxm-vpu") ||
+ meson_vpu_is_compatible(priv, "amlogic,meson-gxl-vpu")) {
regmap_write(priv->hhi, HHI_VDAC_CNTL0, 0xf0001);
-
- regmap_write(priv->hhi, HHI_VDAC_CNTL1, 0);
+ regmap_write(priv->hhi, HHI_VDAC_CNTL1, 0);
+ } else if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
+ regmap_write(priv->hhi, HHI_VDAC_CNTL0_G12A, 0x906001);
+ regmap_write(priv->hhi, HHI_VDAC_CNTL1_G12A, 0);
+ }
}
static void meson_venc_cvbs_encoder_mode_set(struct drm_encoder *encoder,
--
2.21.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: dri-devel@lists.freedesktop.org
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 08/11] drm/meson: Add G12A support for CVBS Encoer
Date: Mon, 25 Mar 2019 15:18:21 +0100 [thread overview]
Message-ID: <20190325141824.21259-9-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190325141824.21259-1-narmstrong@baylibre.com>
The Meson G12A SoCs uses the exact same CVBS encoder except a simple
CVBS DAC register offset and settings delta.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_venc.c | 11 +++++++++--
drivers/gpu/drm/meson/meson_venc_cvbs.c | 25 ++++++++++++++++++-------
2 files changed, 27 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_venc.c b/drivers/gpu/drm/meson/meson_venc.c
index 66d73a932d19..6faca7313339 100644
--- a/drivers/gpu/drm/meson/meson_venc.c
+++ b/drivers/gpu/drm/meson/meson_venc.c
@@ -73,7 +73,9 @@
/* HHI Registers */
#define HHI_GCLK_MPEG2 0x148 /* 0x52 offset in data sheet */
#define HHI_VDAC_CNTL0 0x2F4 /* 0xbd offset in data sheet */
+#define HHI_VDAC_CNTL0_G12A 0x2EC /* 0xbd offset in data sheet */
#define HHI_VDAC_CNTL1 0x2F8 /* 0xbe offset in data sheet */
+#define HHI_VDAC_CNTL1_G12A 0x2F0 /* 0xbe offset in data sheet */
#define HHI_HDMI_PHY_CNTL0 0x3a0 /* 0xe8 offset in data sheet */
struct meson_cvbs_enci_mode meson_cvbs_enci_pal = {
@@ -1675,8 +1677,13 @@ void meson_venc_disable_vsync(struct meson_drm *priv)
void meson_venc_init(struct meson_drm *priv)
{
/* Disable CVBS VDAC */
- regmap_write(priv->hhi, HHI_VDAC_CNTL0, 0);
- regmap_write(priv->hhi, HHI_VDAC_CNTL1, 8);
+ if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
+ regmap_write(priv->hhi, HHI_VDAC_CNTL0_G12A, 0);
+ regmap_write(priv->hhi, HHI_VDAC_CNTL1_G12A, 8);
+ } else {
+ regmap_write(priv->hhi, HHI_VDAC_CNTL0, 0);
+ regmap_write(priv->hhi, HHI_VDAC_CNTL1, 8);
+ }
/* Power Down Dacs */
writel_relaxed(0xff, priv->io_base + _REG(VENC_VDAC_SETTING));
diff --git a/drivers/gpu/drm/meson/meson_venc_cvbs.c b/drivers/gpu/drm/meson/meson_venc_cvbs.c
index d622d817b6df..2c5341c881c4 100644
--- a/drivers/gpu/drm/meson/meson_venc_cvbs.c
+++ b/drivers/gpu/drm/meson/meson_venc_cvbs.c
@@ -37,7 +37,9 @@
/* HHI VDAC Registers */
#define HHI_VDAC_CNTL0 0x2F4 /* 0xbd offset in data sheet */
+#define HHI_VDAC_CNTL0_G12A 0x2EC /* 0xbd offset in data sheet */
#define HHI_VDAC_CNTL1 0x2F8 /* 0xbe offset in data sheet */
+#define HHI_VDAC_CNTL1_G12A 0x2F0 /* 0xbe offset in data sheet */
struct meson_venc_cvbs {
struct drm_encoder encoder;
@@ -166,8 +168,13 @@ static void meson_venc_cvbs_encoder_disable(struct drm_encoder *encoder)
struct meson_drm *priv = meson_venc_cvbs->priv;
/* Disable CVBS VDAC */
- regmap_write(priv->hhi, HHI_VDAC_CNTL0, 0);
- regmap_write(priv->hhi, HHI_VDAC_CNTL1, 8);
+ if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
+ regmap_write(priv->hhi, HHI_VDAC_CNTL0_G12A, 0);
+ regmap_write(priv->hhi, HHI_VDAC_CNTL1_G12A, 0);
+ } else {
+ regmap_write(priv->hhi, HHI_VDAC_CNTL0, 0);
+ regmap_write(priv->hhi, HHI_VDAC_CNTL1, 8);
+ }
}
static void meson_venc_cvbs_encoder_enable(struct drm_encoder *encoder)
@@ -179,13 +186,17 @@ static void meson_venc_cvbs_encoder_enable(struct drm_encoder *encoder)
/* VDAC0 source is not from ATV */
writel_bits_relaxed(BIT(5), 0, priv->io_base + _REG(VENC_VDAC_DACSEL0));
- if (meson_vpu_is_compatible(priv, "amlogic,meson-gxbb-vpu"))
+ if (meson_vpu_is_compatible(priv, "amlogic,meson-gxbb-vpu")) {
regmap_write(priv->hhi, HHI_VDAC_CNTL0, 1);
- else if (meson_vpu_is_compatible(priv, "amlogic,meson-gxm-vpu") ||
- meson_vpu_is_compatible(priv, "amlogic,meson-gxl-vpu"))
+ regmap_write(priv->hhi, HHI_VDAC_CNTL1, 0);
+ } else if (meson_vpu_is_compatible(priv, "amlogic,meson-gxm-vpu") ||
+ meson_vpu_is_compatible(priv, "amlogic,meson-gxl-vpu")) {
regmap_write(priv->hhi, HHI_VDAC_CNTL0, 0xf0001);
-
- regmap_write(priv->hhi, HHI_VDAC_CNTL1, 0);
+ regmap_write(priv->hhi, HHI_VDAC_CNTL1, 0);
+ } else if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
+ regmap_write(priv->hhi, HHI_VDAC_CNTL0_G12A, 0x906001);
+ regmap_write(priv->hhi, HHI_VDAC_CNTL1_G12A, 0);
+ }
}
static void meson_venc_cvbs_encoder_mode_set(struct drm_encoder *encoder,
--
2.21.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-03-25 14:19 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-25 14:18 [PATCH 00/11] drm/meson: Add G12A Support Neil Armstrong
2019-03-25 14:18 ` Neil Armstrong
2019-03-25 14:18 ` [PATCH 01/11] drm/meson: Switch PLL to 5.94GHz base for 297Mhz pixel clock Neil Armstrong
2019-03-25 14:18 ` Neil Armstrong
2019-03-25 14:18 ` [PATCH 02/11] drm/meson: Add registers for G12A SoC Neil Armstrong
2019-03-25 14:18 ` Neil Armstrong
2019-03-25 14:18 ` Neil Armstrong
2019-03-25 14:18 ` [PATCH 03/11] drm/meson: Add G12A Support for VPP setup Neil Armstrong
2019-03-25 14:18 ` Neil Armstrong
2019-03-25 14:18 ` Neil Armstrong
2019-03-25 14:18 ` [PATCH 04/11] drm/meson: Add G12A Support for VIU setup Neil Armstrong
2019-03-25 14:18 ` Neil Armstrong
2019-03-25 14:18 ` Neil Armstrong
2019-04-09 8:42 ` Jerome Brunet
2019-04-09 8:42 ` Jerome Brunet
2019-04-09 9:19 ` Neil Armstrong
2019-04-09 9:19 ` Neil Armstrong
2019-04-09 9:19 ` Neil Armstrong
2019-03-25 14:18 ` [PATCH 05/11] drm/meson: Add G12A support for OSD1 Plane Neil Armstrong
2019-03-25 14:18 ` Neil Armstrong
2019-03-25 14:18 ` Neil Armstrong
2019-03-25 14:18 ` [PATCH 06/11] drm/meson: Add G12A Support for the Overlay video plane Neil Armstrong
2019-03-25 14:18 ` Neil Armstrong
2019-03-25 14:18 ` Neil Armstrong
2019-04-09 8:42 ` Jerome Brunet
2019-04-09 8:42 ` Jerome Brunet
2019-04-09 9:19 ` Neil Armstrong
2019-04-09 9:19 ` Neil Armstrong
2019-04-09 9:19 ` Neil Armstrong
2019-03-25 14:18 ` [PATCH 07/11] drm/meson: Add G12A support for plane handling in CRTC driver Neil Armstrong
2019-03-25 14:18 ` Neil Armstrong
2019-04-09 8:43 ` Jerome Brunet
2019-04-09 8:43 ` Jerome Brunet
2019-04-09 9:17 ` Neil Armstrong
2019-04-09 9:17 ` Neil Armstrong
2019-03-25 14:18 ` Neil Armstrong [this message]
2019-03-25 14:18 ` [PATCH 08/11] drm/meson: Add G12A support for CVBS Encoer Neil Armstrong
2019-03-25 14:18 ` Neil Armstrong
2019-04-09 8:43 ` Jerome Brunet
2019-04-09 8:43 ` Jerome Brunet
2019-04-09 8:44 ` Jerome Brunet
2019-04-09 8:44 ` Jerome Brunet
2019-04-09 9:18 ` Neil Armstrong
2019-04-09 9:18 ` Neil Armstrong
2019-04-09 9:18 ` Neil Armstrong
2019-04-09 9:18 ` Neil Armstrong
2019-04-09 9:18 ` Neil Armstrong
2019-03-25 14:18 ` [PATCH 09/11] drm/meson: Add G12A Video Clock setup Neil Armstrong
2019-03-25 14:18 ` Neil Armstrong
2019-04-09 8:46 ` Jerome Brunet
2019-04-09 8:46 ` Jerome Brunet
2019-04-09 9:19 ` Neil Armstrong
2019-04-09 9:19 ` Neil Armstrong
2019-03-25 14:18 ` [PATCH 10/11] drm/meson: Add G12A compatible Neil Armstrong
2019-03-25 14:18 ` Neil Armstrong
2019-03-25 14:18 ` [PATCH 11/11] drm/meson: Add G12A support for the DW-HDMI Glue Neil Armstrong
2019-03-25 14:18 ` Neil Armstrong
2019-04-09 8:42 ` [PATCH 00/11] drm/meson: Add G12A Support Jerome Brunet
2019-04-09 8:42 ` Jerome Brunet
2019-04-09 8:51 ` Neil Armstrong
2019-04-09 8:51 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190325141824.21259-9-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.