From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: rui.zhang@intel.com, edubezval@gmail.com
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
Amit Kucheria <amit.kucheria@linaro.org>,
Stephen Rothwell <sfr@canb.auug.org.au>,
"open list:ARM/QUALCOMM SUPPORT" <linux-arm-msm@vger.kernel.org>
Subject: [PATCH 5/7] thermal/drivers/core: Remove depends on THERMAL in Kconfig
Date: Tue, 2 Apr 2019 18:12:48 +0200 [thread overview]
Message-ID: <20190402161256.11044-5-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <20190402161256.11044-1-daniel.lezcano@linaro.org>
The dependency on the THERMAL option to be set is already there implicitly
by the "if THERMAL" conditionnal option. The sub Kconfigs do not have to
check against the THERMAL option as they are called from a Kconfig block
which is enabled by the conditionnal option.
Remove the useless "depends on THERMAL" in the Kconfigs.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/thermal/Kconfig | 2 --
drivers/thermal/intel/Kconfig | 1 -
drivers/thermal/qcom/Kconfig | 1 -
3 files changed, 4 deletions(-)
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index ccf5b9408d7a..d8aa7fac8c56 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -24,7 +24,6 @@ config THERMAL_STATISTICS
config THERMAL_EMERGENCY_POWEROFF_DELAY_MS
int "Emergency poweroff delay in milli-seconds"
- depends on THERMAL
default 0
help
Thermal subsystem will issue a graceful shutdown when
@@ -152,7 +151,6 @@ config CPU_THERMAL
bool "generic cpu cooling support"
depends on CPU_FREQ
depends on THERMAL_OF
- depends on THERMAL=y
help
This implements the generic cpu cooling mechanism through frequency
reduction. An ACPI version of this already exists
diff --git a/drivers/thermal/intel/Kconfig b/drivers/thermal/intel/Kconfig
index 2e013eeb4a1d..2c727a820759 100644
--- a/drivers/thermal/intel/Kconfig
+++ b/drivers/thermal/intel/Kconfig
@@ -1,6 +1,5 @@
config INTEL_POWERCLAMP
tristate "Intel PowerClamp idle injection driver"
- depends on THERMAL
depends on X86
depends on CPU_SUP_INTEL
help
diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig
index cdb455ffd575..3ce20fec86a2 100644
--- a/drivers/thermal/qcom/Kconfig
+++ b/drivers/thermal/qcom/Kconfig
@@ -1,6 +1,5 @@
config QCOM_TSENS
tristate "Qualcomm TSENS Temperature Alarm"
- depends on THERMAL
depends on QCOM_QFPROM
depends on ARCH_QCOM || COMPILE_TEST
help
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: rui.zhang@intel.com, edubezval@gmail.com
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
Amit Kucheria <amit.kucheria@linaro.org>,
Stephen Rothwell <sfr@canb.auug.org.au>,
linux-arm-msm@vger.kernel.org (open list:ARM/QUALCOMM SUPPORT)
Subject: [PATCH 5/7] thermal/drivers/core: Remove depends on THERMAL in Kconfig
Date: Tue, 2 Apr 2019 18:12:48 +0200 [thread overview]
Message-ID: <20190402161256.11044-5-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <20190402161256.11044-1-daniel.lezcano@linaro.org>
The dependency on the THERMAL option to be set is already there implicitly
by the "if THERMAL" conditionnal option. The sub Kconfigs do not have to
check against the THERMAL option as they are called from a Kconfig block
which is enabled by the conditionnal option.
Remove the useless "depends on THERMAL" in the Kconfigs.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/thermal/Kconfig | 2 --
drivers/thermal/intel/Kconfig | 1 -
drivers/thermal/qcom/Kconfig | 1 -
3 files changed, 4 deletions(-)
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index ccf5b9408d7a..d8aa7fac8c56 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -24,7 +24,6 @@ config THERMAL_STATISTICS
config THERMAL_EMERGENCY_POWEROFF_DELAY_MS
int "Emergency poweroff delay in milli-seconds"
- depends on THERMAL
default 0
help
Thermal subsystem will issue a graceful shutdown when
@@ -152,7 +151,6 @@ config CPU_THERMAL
bool "generic cpu cooling support"
depends on CPU_FREQ
depends on THERMAL_OF
- depends on THERMAL=y
help
This implements the generic cpu cooling mechanism through frequency
reduction. An ACPI version of this already exists
diff --git a/drivers/thermal/intel/Kconfig b/drivers/thermal/intel/Kconfig
index 2e013eeb4a1d..2c727a820759 100644
--- a/drivers/thermal/intel/Kconfig
+++ b/drivers/thermal/intel/Kconfig
@@ -1,6 +1,5 @@
config INTEL_POWERCLAMP
tristate "Intel PowerClamp idle injection driver"
- depends on THERMAL
depends on X86
depends on CPU_SUP_INTEL
help
diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig
index cdb455ffd575..3ce20fec86a2 100644
--- a/drivers/thermal/qcom/Kconfig
+++ b/drivers/thermal/qcom/Kconfig
@@ -1,6 +1,5 @@
config QCOM_TSENS
tristate "Qualcomm TSENS Temperature Alarm"
- depends on THERMAL
depends on QCOM_QFPROM
depends on ARCH_QCOM || COMPILE_TEST
help
--
2.17.1
next prev parent reply other threads:[~2019-04-02 16:12 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-02 16:12 [PATCH 1/7] thermal/drivers/core: Remove the module Kconfig's option Daniel Lezcano
2019-04-02 16:12 ` Daniel Lezcano
2019-04-02 16:12 ` Daniel Lezcano
2019-04-02 16:12 ` [PATCH 2/7] thermal/drivers/core: Remove module unload code Daniel Lezcano
2019-04-02 16:12 ` [PATCH 3/7] thermal/drivers/core: Add init section table for self-encapsulation Daniel Lezcano
2019-04-02 16:12 ` Daniel Lezcano
2019-04-22 8:43 ` Zhang Rui
2019-04-22 8:43 ` Zhang Rui
2019-04-22 12:11 ` Daniel Lezcano
2019-04-22 12:11 ` Daniel Lezcano
2019-04-22 12:11 ` Daniel Lezcano
2019-04-22 12:11 ` Daniel Lezcano
2019-04-23 5:59 ` Zhang Rui
2019-04-23 5:59 ` Zhang Rui
2019-04-28 23:23 ` Daniel Lezcano
2019-04-28 23:23 ` Daniel Lezcano
2019-04-30 13:25 ` Arnd Bergmann
2019-04-30 13:25 ` Arnd Bergmann
2019-05-03 20:28 ` Daniel Lezcano
2019-05-03 20:28 ` Daniel Lezcano
2019-05-06 12:44 ` Zhang Rui
2019-05-06 12:44 ` Zhang Rui
2019-04-02 16:12 ` [PATCH 4/7] thermal/drivers/core: Use governor table to initialize Daniel Lezcano
2019-04-23 10:33 ` Amit Kucheria
2019-04-02 16:12 ` Daniel Lezcano [this message]
2019-04-02 16:12 ` [PATCH 5/7] thermal/drivers/core: Remove depends on THERMAL in Kconfig Daniel Lezcano
2019-04-02 18:51 ` Amit Kucheria
2019-04-03 3:32 ` Daniel Lezcano
2019-04-23 10:35 ` Amit Kucheria
2019-04-02 16:12 ` [PATCH 6/7] thermal/drivers/core: Fix typo in the option name Daniel Lezcano
2019-04-02 16:12 ` [PATCH 7/7] hwmon/drivers/core: Simplify complex dependency Daniel Lezcano
2019-04-02 16:12 ` Daniel Lezcano
2019-04-02 18:23 ` Guenter Roeck
2019-04-03 22:55 ` [PATCH 1/7] thermal/drivers/core: Remove the module Kconfig's option Paul Burton
2019-04-03 22:55 ` Paul Burton
2019-04-03 22:55 ` Paul Burton
2019-04-04 20:40 ` Robert Jarzmik
2019-04-04 20:40 ` Robert Jarzmik
2019-04-04 20:40 ` Robert Jarzmik
2019-04-23 15:52 ` Eduardo Valentin
2019-04-23 15:52 ` Eduardo Valentin
2019-04-24 5:45 ` Amit Kucheria
2019-04-24 5:45 ` Amit Kucheria
2019-04-24 5:45 ` Amit Kucheria
2019-04-24 13:02 ` Zhang Rui
2019-04-24 13:02 ` Zhang Rui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190402161256.11044-5-daniel.lezcano@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=amit.kucheria@linaro.org \
--cc=andy.gross@linaro.org \
--cc=david.brown@linaro.org \
--cc=edubezval@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rui.zhang@intel.com \
--cc=sfr@canb.auug.org.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.