From: Miquel Raynal <miquel.raynal@bootlin.com> To: Richard Weinberger <richard@nod.at>, David Woodhouse <dwmw2@infradead.org>, Brian Norris <computersforpeace@gmail.com>, Marek Vasut <marek.vasut@gmail.com>, Tudor Ambarus <Tudor.Ambarus@microchip.com>, Vignesh Raghavendra <vigneshr@ti.com>, Maxime Ripard <maxime.ripard@bootlin.com>, Chen-Yu Tsai <wens@csie.org> Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, linux-mtd@lists.infradead.org, Miquel Raynal <miquel.raynal@bootlin.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/3] ARM: dts: sunxi: Improve sun8i NAND transfers by using DMA Date: Thu, 4 Apr 2019 18:21:11 +0200 [thread overview] Message-ID: <20190404162111.22618-4-miquel.raynal@bootlin.com> (raw) In-Reply-To: <20190404162111.22618-1-miquel.raynal@bootlin.com> In the current state, sun8i NAND controllers use PIO during transfers. Throughput can be increased thanks to the use of DMA (mostly during reads, because of the ECC pipelining feature). Besides the usual addition of DMA DT properties, because the sun8i NAND DMA handling is different than for older SoCs, we must also update the compatible which has recently been introduced for this purpose. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- arch/arm/boot/dts/sun8i-a23-a33.dtsi | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 14a7d0288b45..f928b4bceb22 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -162,11 +162,13 @@ }; nfc: nand@1c03000 { - compatible = "allwinner,sun4i-a10-nand"; + compatible = "allwinner,sun8i-a33-nand-controller"; reg = <0x01c03000 0x1000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>; clock-names = "ahb", "mod"; + dmas = <&dma 5>; + dma-names = "rxtx"; resets = <&ccu RST_BUS_NAND>; reset-names = "ahb"; pinctrl-names = "default"; -- 2.19.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
WARNING: multiple messages have this Message-ID (diff)
From: Miquel Raynal <miquel.raynal@bootlin.com> To: Richard Weinberger <richard@nod.at>, David Woodhouse <dwmw2@infradead.org>, Brian Norris <computersforpeace@gmail.com>, Marek Vasut <marek.vasut@gmail.com>, Tudor Ambarus <Tudor.Ambarus@microchip.com>, Vignesh Raghavendra <vigneshr@ti.com>, Maxime Ripard <maxime.ripard@bootlin.com>, Chen-Yu Tsai <wens@csie.org> Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, linux-mtd@lists.infradead.org, Miquel Raynal <miquel.raynal@bootlin.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/3] ARM: dts: sunxi: Improve sun8i NAND transfers by using DMA Date: Thu, 4 Apr 2019 18:21:11 +0200 [thread overview] Message-ID: <20190404162111.22618-4-miquel.raynal@bootlin.com> (raw) In-Reply-To: <20190404162111.22618-1-miquel.raynal@bootlin.com> In the current state, sun8i NAND controllers use PIO during transfers. Throughput can be increased thanks to the use of DMA (mostly during reads, because of the ECC pipelining feature). Besides the usual addition of DMA DT properties, because the sun8i NAND DMA handling is different than for older SoCs, we must also update the compatible which has recently been introduced for this purpose. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- arch/arm/boot/dts/sun8i-a23-a33.dtsi | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 14a7d0288b45..f928b4bceb22 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -162,11 +162,13 @@ }; nfc: nand@1c03000 { - compatible = "allwinner,sun4i-a10-nand"; + compatible = "allwinner,sun8i-a33-nand-controller"; reg = <0x01c03000 0x1000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>; clock-names = "ahb", "mod"; + dmas = <&dma 5>; + dma-names = "rxtx"; resets = <&ccu RST_BUS_NAND>; reset-names = "ahb"; pinctrl-names = "default"; -- 2.19.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-04-04 16:21 UTC|newest] Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-04-04 16:21 [PATCH 0/3] Sun8i NAND DMA support Miquel Raynal 2019-04-04 16:21 ` Miquel Raynal 2019-04-04 16:21 ` [PATCH 1/3] dt-bindings: mtd: sunxi: Add new compatible Miquel Raynal 2019-04-04 16:21 ` Miquel Raynal 2019-04-04 16:21 ` Miquel Raynal 2019-04-05 9:13 ` Maxime Ripard 2019-04-05 9:13 ` Maxime Ripard 2019-04-05 9:28 ` Miquel Raynal 2019-04-05 9:28 ` Miquel Raynal 2019-04-05 9:56 ` Maxime Ripard 2019-04-05 9:56 ` Maxime Ripard 2019-04-04 16:21 ` [PATCH 2/3] mtd: rawnand: sunxi: Add DMA support for sun8i Miquel Raynal 2019-04-04 16:21 ` Miquel Raynal 2019-04-04 16:21 ` Miquel Raynal 2019-04-05 9:16 ` Maxime Ripard 2019-04-05 9:16 ` Maxime Ripard 2019-04-05 9:37 ` Miquel Raynal 2019-04-05 9:37 ` Miquel Raynal 2019-04-05 10:55 ` Maxime Ripard 2019-04-05 10:55 ` Maxime Ripard 2019-04-05 12:25 ` Miquel Raynal 2019-04-05 12:25 ` Miquel Raynal 2019-04-05 12:47 ` Maxime Ripard 2019-04-05 12:47 ` Maxime Ripard 2019-04-14 9:05 ` Boris Brezillon 2019-04-14 9:05 ` Boris Brezillon 2019-04-14 9:05 ` Boris Brezillon 2019-04-15 6:58 ` Miquel Raynal 2019-04-15 6:58 ` Miquel Raynal 2019-04-15 7:14 ` Boris Brezillon 2019-04-15 7:14 ` Boris Brezillon 2019-04-15 7:14 ` Boris Brezillon 2019-04-16 16:53 ` Miquel Raynal 2019-04-16 16:53 ` Miquel Raynal 2019-04-04 16:21 ` Miquel Raynal [this message] 2019-04-04 16:21 ` [PATCH 3/3] ARM: dts: sunxi: Improve sun8i NAND transfers by using DMA Miquel Raynal 2019-04-05 9:18 ` Maxime Ripard 2019-04-05 9:18 ` Maxime Ripard 2019-04-05 9:38 ` Miquel Raynal 2019-04-05 9:38 ` Miquel Raynal
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190404162111.22618-4-miquel.raynal@bootlin.com \ --to=miquel.raynal@bootlin.com \ --cc=Tudor.Ambarus@microchip.com \ --cc=computersforpeace@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=dwmw2@infradead.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-mtd@lists.infradead.org \ --cc=marek.vasut@gmail.com \ --cc=mark.rutland@arm.com \ --cc=maxime.ripard@bootlin.com \ --cc=richard@nod.at \ --cc=robh+dt@kernel.org \ --cc=vigneshr@ti.com \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.