From: Icenowy Zheng <icenowy@aosc.io> To: Rob Herring <robh+dt@kernel.org>, Kishon Vijay Abraham I <kishon@ti.com>, Maxime Ripard <maxime.ripard@bootlin.com>, Chen-Yu Tsai <wens@csie.org> Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@googlegroups.com, Icenowy Zheng <icenowy@aosc.io> Subject: [PATCH v5 5/5] arm64: allwinner: dts: h6: enable USB3 port on Pine H64 Date: Sat, 6 Apr 2019 04:57:36 +0800 [thread overview] Message-ID: <20190405205736.55177-6-icenowy@aosc.io> (raw) In-Reply-To: <20190405205736.55177-1-icenowy@aosc.io> Pine H64 board have a USB3 port, which is connected to the USB3 pins of the H6 SoC, and the 5V power supply is controlled via GPIO (shared with the power USB ports). Enable this port. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> --- Changes in v5: - Migrated to connector subnode. No changes in v4. Changes in v3: - Added Chen-Yu's Review tag. .../arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index bdb8470fc8dc..d03e20ee1cc3 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -95,6 +95,10 @@ }; }; +&dwc3 { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -267,3 +271,12 @@ usb3_vbus-supply = <®_usb_vbus>; status = "okay"; }; + +&usb3phy { + status = "okay"; + + connector { + compatible = "usb-a-connector"; + vbus-supply = <®_usb_vbus>; + }; +}; -- 2.18.1
WARNING: multiple messages have this Message-ID (diff)
From: Icenowy Zheng <icenowy@aosc.io> To: Rob Herring <robh+dt@kernel.org>, Kishon Vijay Abraham I <kishon@ti.com>, Maxime Ripard <maxime.ripard@bootlin.com>, Chen-Yu Tsai <wens@csie.org> Cc: devicetree@vger.kernel.org, linux-sunxi@googlegroups.com, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Icenowy Zheng <icenowy@aosc.io> Subject: [PATCH v5 5/5] arm64: allwinner: dts: h6: enable USB3 port on Pine H64 Date: Sat, 6 Apr 2019 04:57:36 +0800 [thread overview] Message-ID: <20190405205736.55177-6-icenowy@aosc.io> (raw) In-Reply-To: <20190405205736.55177-1-icenowy@aosc.io> Pine H64 board have a USB3 port, which is connected to the USB3 pins of the H6 SoC, and the 5V power supply is controlled via GPIO (shared with the power USB ports). Enable this port. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> --- Changes in v5: - Migrated to connector subnode. No changes in v4. Changes in v3: - Added Chen-Yu's Review tag. .../arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index bdb8470fc8dc..d03e20ee1cc3 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -95,6 +95,10 @@ }; }; +&dwc3 { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -267,3 +271,12 @@ usb3_vbus-supply = <®_usb_vbus>; status = "okay"; }; + +&usb3phy { + status = "okay"; + + connector { + compatible = "usb-a-connector"; + vbus-supply = <®_usb_vbus>; + }; +}; -- 2.18.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-04-05 20:58 UTC|newest] Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-04-05 20:57 [PATCH v5 0/5] Allwinner H6 USB3 support Icenowy Zheng 2019-04-05 20:57 ` Icenowy Zheng 2019-04-05 20:57 ` [PATCH v5 1/5] dt-bindings: usb-connector: add Vbus regulator for Type-A/B Icenowy Zheng 2019-04-05 20:57 ` Icenowy Zheng 2019-04-05 20:57 ` Icenowy Zheng 2019-04-06 7:10 ` Rob Herring 2019-04-06 7:10 ` Rob Herring 2019-04-06 7:10 ` Rob Herring 2019-04-05 20:57 ` [PATCH v5 2/5] dt-bindings: phy: add binding for Allwinner USB3 PHY Icenowy Zheng 2019-04-05 20:57 ` Icenowy Zheng 2019-04-05 20:57 ` Icenowy Zheng 2019-04-06 7:14 ` Rob Herring 2019-04-06 7:14 ` Rob Herring 2019-04-06 7:24 ` Icenowy Zheng 2019-04-06 7:24 ` Icenowy Zheng 2019-04-09 1:09 ` Rob Herring 2019-04-09 1:09 ` Rob Herring 2019-04-09 1:09 ` Rob Herring 2019-04-08 7:14 ` Maxime Ripard 2019-04-08 7:14 ` Maxime Ripard 2019-04-08 7:14 ` Maxime Ripard 2019-04-05 20:57 ` [PATCH v5 3/5] phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC Icenowy Zheng 2019-04-05 20:57 ` Icenowy Zheng 2019-04-06 17:21 ` [linux-sunxi] " Ondřej Jirman 2019-04-06 17:21 ` Ondřej Jirman 2019-04-06 17:21 ` 'Ondřej Jirman' via linux-sunxi 2019-04-06 17:24 ` [linux-sunxi] " Icenowy Zheng 2019-04-06 17:24 ` Icenowy Zheng 2019-04-06 17:24 ` Icenowy Zheng 2019-04-09 16:34 ` [linux-sunxi] " Clément Péron 2019-04-09 16:34 ` Clément Péron 2019-04-11 0:15 ` Ondřej Jirman 2019-04-11 0:15 ` Ondřej Jirman 2019-04-11 0:15 ` 'Ondřej Jirman' via linux-sunxi 2019-04-11 0:20 ` [linux-sunxi] " Ondřej Jirman 2019-04-11 0:20 ` Ondřej Jirman 2019-04-11 0:20 ` 'Ondřej Jirman' via linux-sunxi 2019-04-05 20:57 ` [PATCH v5 4/5] arm64: allwinner: dts: h6: add USB3 device nodes Icenowy Zheng 2019-04-05 20:57 ` Icenowy Zheng 2019-04-05 20:57 ` Icenowy Zheng 2019-04-05 20:57 ` Icenowy Zheng [this message] 2019-04-05 20:57 ` [PATCH v5 5/5] arm64: allwinner: dts: h6: enable USB3 port on Pine H64 Icenowy Zheng
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190405205736.55177-6-icenowy@aosc.io \ --to=icenowy@aosc.io \ --cc=devicetree@vger.kernel.org \ --cc=kishon@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-sunxi@googlegroups.com \ --cc=maxime.ripard@bootlin.com \ --cc=robh+dt@kernel.org \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.