All of lore.kernel.org
 help / color / mirror / Atom feed
From: megous@megous.com
To: linux-sunxi@googlegroups.com,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>
Cc: Ondrej Jirman <megous@megous.com>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Mark Rutland <mark.rutland@arm.com>,
	Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	Jose Abreu <joabreu@synopsys.com>,
	"David S. Miller" <davem@davemloft.net>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Arend van Spriel <arend.vanspriel@broadcom.com>,
	Franky Lin <franky.lin@broadcom.com>,
	Hante Meuleman <hante.meuleman@broadcom.com>,
	Chi-Hsien Lin <chi-hsien.lin@cypress.com>,
	Wright Feng <wright.feng@cypress.com>,
	Kalle Valo <kvalo@codeaurora.org>,
	Naveen Gupta <naveen.gupta@cypress.com>,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-wireless@vger.kernel.org,
	brcm80211-dev-list.pdl@broadcom.com,
	brcm80211-dev-list@cypress.com, linux-gpio@vger.kernel.org
Subject: [PATCH 01/12] arm64: dts: allwinner: h6: Add Orange Pi 3 DTS
Date: Sat,  6 Apr 2019 01:45:03 +0200	[thread overview]
Message-ID: <20190405234514.6183-2-megous@megous.com> (raw)
In-Reply-To: <20190405234514.6183-1-megous@megous.com>

From: Ondrej Jirman <megous@megous.com>

Orange Pi 3 is a H6 based SBC made by Xulong, released in
January 2019. It has the following features:

- Allwinner H6 quad-core 64-bit ARM Cortex-A53
- GPU Mali-T720
- 1GB or 2GB LPDDR3 RAM
- AXP805 PMIC
- AP6256 Wifi/BT 5.0
- USB 2.0 host port (A)
- USB 2.0 micro usb, OTG
- USB 3.0 Host + 4 port USB hub (GL3510)
- Gigabit Ethernet (Realtek RTL8211E phy)
- HDMI 2.0 port
- soldered eMMC (optional)
- 3x LED (one is on the bottom)
- microphone
- audio jack
- PCIe

Add basic support for the board.

Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 arch/arm64/boot/dts/allwinner/Makefile        |   1 +
 .../dts/allwinner/sun50i-h6-orangepi-3.dts    | 212 ++++++++++++++++++
 2 files changed, 213 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts

diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index e4dce2f6fa3a..285a7cb5135b 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -20,6 +20,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
new file mode 100644
index 000000000000..7a2424fcaed7
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2019 Ondřej Jirman <megous@megous.com>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi 3";
+	compatible = "xunlong,orangepi-3", "allwinner,sun50i-h6";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "orangepi:red:power";
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+			default-state = "on";
+		};
+
+		status {
+			label = "orangepi:green:status";
+			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC jack */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_cldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_bldo2>;
+	vcc-pd-supply = <&reg_cldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp805: pmic@36 {
+		compatible = "x-powers,axp805", "x-powers,axp806";
+		reg = <0x36>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-led-ir";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-audio-tv-ephy-mac";
+			};
+
+			/* ALDO3 is shorted to CLDO1 */
+			reg_aldo3: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-1";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18-dram-bias-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse-pcie-hdmi-pc";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-2";
+			};
+
+			cldo2 {
+				/* unused */
+			};
+
+			cldo3 {
+				/* unused */
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <960000>;
+				regulator-max-microvolt = <960000>;
+				regulator-name = "vdd-sys";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dram";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */
+	usb0_vbus-supply = <&reg_vcc5v>;
+	usb3_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
-- 
2.21.0


WARNING: multiple messages have this Message-ID (diff)
From: megous via linux-sunxi <linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org>
To: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	Maxime Ripard
	<maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>,
	Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Linus Walleij
	<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Ondrej Jirman <megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>,
	David Airlie <airlied-cv59FeDIM0c@public.gmane.org>,
	Daniel Vetter <daniel-/w4YWyX8dFk@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Giuseppe Cavallaro <peppe.cavallaro-qxv4g6HH51o@public.gmane.org>,
	Alexandre Torgue <alexandre.torgue-qxv4g6HH51o@public.gmane.org>,
	Jose Abreu <joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>,
	"David S. Miller" <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>,
	Maxime Coquelin
	<mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Arend van Spriel
	<arend.vanspriel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
	Franky Lin <franky.lin-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
	Hante Meuleman
	<hante.meuleman-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
	Chi-Hsien Lin
	<chi-hsien.lin-+wT8y+m8/X5BDgjK7y7TUQ@public.gmane.org>,
	Wright Feng <wright.feng-+wT8y+m8/X5BDgjK7y7TUQ@public.gmane.org>,
	Kalle Valo <kvalo-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	Naveen Gupta
	<naveen.gupta-+wT8y+m8/X5BDgjK7y7TUQ@public.gmane.org>,
	dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-stm32-XDFAJ8BFU24N7RejjzZ/Li2xQDfSxrLKVpNB7YpNyf8@public.gmane.org,
	linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, brcm802
Subject: [PATCH 01/12] arm64: dts: allwinner: h6: Add Orange Pi 3 DTS
Date: Sat,  6 Apr 2019 01:45:03 +0200	[thread overview]
Message-ID: <20190405234514.6183-2-megous@megous.com> (raw)
In-Reply-To: <20190405234514.6183-1-megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>

From: Ondrej Jirman <megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>

Orange Pi 3 is a H6 based SBC made by Xulong, released in
January 2019. It has the following features:

- Allwinner H6 quad-core 64-bit ARM Cortex-A53
- GPU Mali-T720
- 1GB or 2GB LPDDR3 RAM
- AXP805 PMIC
- AP6256 Wifi/BT 5.0
- USB 2.0 host port (A)
- USB 2.0 micro usb, OTG
- USB 3.0 Host + 4 port USB hub (GL3510)
- Gigabit Ethernet (Realtek RTL8211E phy)
- HDMI 2.0 port
- soldered eMMC (optional)
- 3x LED (one is on the bottom)
- microphone
- audio jack
- PCIe

Add basic support for the board.

Signed-off-by: Ondrej Jirman <megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
---
 arch/arm64/boot/dts/allwinner/Makefile        |   1 +
 .../dts/allwinner/sun50i-h6-orangepi-3.dts    | 212 ++++++++++++++++++
 2 files changed, 213 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts

diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index e4dce2f6fa3a..285a7cb5135b 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -20,6 +20,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
new file mode 100644
index 000000000000..7a2424fcaed7
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2019 Ondřej Jirman <megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi 3";
+	compatible = "xunlong,orangepi-3", "allwinner,sun50i-h6";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "orangepi:red:power";
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+			default-state = "on";
+		};
+
+		status {
+			label = "orangepi:green:status";
+			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC jack */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_cldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_bldo2>;
+	vcc-pd-supply = <&reg_cldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp805: pmic@36 {
+		compatible = "x-powers,axp805", "x-powers,axp806";
+		reg = <0x36>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-led-ir";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-audio-tv-ephy-mac";
+			};
+
+			/* ALDO3 is shorted to CLDO1 */
+			reg_aldo3: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-1";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18-dram-bias-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse-pcie-hdmi-pc";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-2";
+			};
+
+			cldo2 {
+				/* unused */
+			};
+
+			cldo3 {
+				/* unused */
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <960000>;
+				regulator-max-microvolt = <960000>;
+				regulator-name = "vdd-sys";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dram";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */
+	usb0_vbus-supply = <&reg_vcc5v>;
+	usb3_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
-- 
2.21.0

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.

WARNING: multiple messages have this Message-ID (diff)
From: megous@megous.com
To: linux-sunxi@googlegroups.com,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>
Cc: Ondrej Jirman <megous@megous.com>,
	Mark Rutland <mark.rutland@arm.com>,
	David Airlie <airlied@linux.ie>,
	Chi-Hsien Lin <chi-hsien.lin@cypress.com>,
	dri-devel@lists.freedesktop.org,
	linux-stm32@st-md-mailman.stormreply.com,
	brcm80211-dev-list@cypress.com, Jose Abreu <joabreu@synopsys.com>,
	Naveen Gupta <naveen.gupta@cypress.com>,
	devicetree@vger.kernel.org,
	Arend van Spriel <arend.vanspriel@broadcom.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	Hante Meuleman <hante.meuleman@broadcom.com>,
	linux-gpio@vger.kernel.org, Wright Feng <wright.feng@cypress.com>,
	Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	linux-arm-kernel@lists.infradead.org,
	Franky Lin <franky.lin@broadcom.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	brcm80211-dev-list.pdl@broadcom.com, netdev@vger.kernel.org,
	linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
	Kalle Valo <kvalo@codeaurora.org>,
	Daniel Vetter <daniel@ffwll.ch>,
	"David S. Miller" <davem@davemloft.net>
Subject: [PATCH 01/12] arm64: dts: allwinner: h6: Add Orange Pi 3 DTS
Date: Sat,  6 Apr 2019 01:45:03 +0200	[thread overview]
Message-ID: <20190405234514.6183-2-megous@megous.com> (raw)
In-Reply-To: <20190405234514.6183-1-megous@megous.com>

From: Ondrej Jirman <megous@megous.com>

Orange Pi 3 is a H6 based SBC made by Xulong, released in
January 2019. It has the following features:

- Allwinner H6 quad-core 64-bit ARM Cortex-A53
- GPU Mali-T720
- 1GB or 2GB LPDDR3 RAM
- AXP805 PMIC
- AP6256 Wifi/BT 5.0
- USB 2.0 host port (A)
- USB 2.0 micro usb, OTG
- USB 3.0 Host + 4 port USB hub (GL3510)
- Gigabit Ethernet (Realtek RTL8211E phy)
- HDMI 2.0 port
- soldered eMMC (optional)
- 3x LED (one is on the bottom)
- microphone
- audio jack
- PCIe

Add basic support for the board.

Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 arch/arm64/boot/dts/allwinner/Makefile        |   1 +
 .../dts/allwinner/sun50i-h6-orangepi-3.dts    | 212 ++++++++++++++++++
 2 files changed, 213 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts

diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index e4dce2f6fa3a..285a7cb5135b 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -20,6 +20,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
new file mode 100644
index 000000000000..7a2424fcaed7
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2019 Ondřej Jirman <megous@megous.com>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi 3";
+	compatible = "xunlong,orangepi-3", "allwinner,sun50i-h6";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "orangepi:red:power";
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+			default-state = "on";
+		};
+
+		status {
+			label = "orangepi:green:status";
+			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC jack */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_cldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_bldo2>;
+	vcc-pd-supply = <&reg_cldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp805: pmic@36 {
+		compatible = "x-powers,axp805", "x-powers,axp806";
+		reg = <0x36>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-led-ir";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-audio-tv-ephy-mac";
+			};
+
+			/* ALDO3 is shorted to CLDO1 */
+			reg_aldo3: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-1";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18-dram-bias-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse-pcie-hdmi-pc";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-2";
+			};
+
+			cldo2 {
+				/* unused */
+			};
+
+			cldo3 {
+				/* unused */
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <960000>;
+				regulator-max-microvolt = <960000>;
+				regulator-name = "vdd-sys";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dram";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */
+	usb0_vbus-supply = <&reg_vcc5v>;
+	usb3_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-04-05 23:52 UTC|newest]

Thread overview: 142+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-05 23:45 [PATCH 00/12] Add support for Orange Pi 3 megous
2019-04-05 23:45 ` megous
2019-04-05 23:45 ` megous via linux-sunxi
2019-04-05 23:45 ` megous [this message]
2019-04-05 23:45   ` [PATCH 01/12] arm64: dts: allwinner: h6: Add Orange Pi 3 DTS megous
2019-04-05 23:45   ` megous via linux-sunxi
2019-04-08  7:46   ` Maxime Ripard
2019-04-08  7:46     ` Maxime Ripard
2019-04-08  7:46     ` Maxime Ripard
2019-04-08 22:58     ` Ondřej Jirman
2019-04-08 22:58       ` Ondřej Jirman
2019-04-08 22:58       ` 'Ondřej Jirman' via linux-sunxi
2019-04-09  7:22       ` Maxime Ripard
2019-04-09  7:22         ` Maxime Ripard
2019-04-09  7:22         ` Maxime Ripard
2019-04-05 23:45 ` [PATCH 02/12] drm: sun4i: Add support for enabling DDC I2C bus to dw_hdmi glue megous
2019-04-05 23:45   ` megous
2019-04-05 23:45   ` megous via linux-sunxi
2019-04-08  7:23   ` Maxime Ripard
2019-04-08  7:23     ` Maxime Ripard
2019-04-08  7:23     ` Maxime Ripard
2019-04-08  7:28     ` [linux-sunxi] " Chen-Yu Tsai
2019-04-08  7:28       ` Chen-Yu Tsai
2019-04-08  7:28       ` Chen-Yu Tsai
2019-04-08  8:47       ` Maxime Ripard
2019-04-08  8:47         ` Maxime Ripard
2019-04-08  8:47         ` Maxime Ripard
2019-04-08 12:17         ` [linux-sunxi] " Ondřej Jirman
2019-04-08 12:17           ` Ondřej Jirman
2019-04-08 12:17           ` 'Ondřej Jirman' via linux-sunxi
2019-04-09  7:45           ` [linux-sunxi] " Maxime Ripard
2019-04-09  7:45             ` Maxime Ripard
2019-04-09  7:45             ` Maxime Ripard
2019-04-05 23:45 ` [PATCH 03/12] dt-bindings: display: sun4i-drm: Add DDC power supply megous
2019-04-05 23:45   ` megous
2019-04-05 23:45   ` megous via linux-sunxi
2019-04-05 23:45 ` [PATCH 04/12] arm64: dts: allwinner: orange-pi-3: Enable HDMI output megous
2019-04-05 23:45   ` megous
2019-04-05 23:45   ` megous via linux-sunxi
2019-04-08  7:24   ` Maxime Ripard
2019-04-08  7:24     ` Maxime Ripard
2019-04-08  7:24     ` Maxime Ripard
2019-04-05 23:45 ` [PATCH 05/12] net: stmmac: sun8i: add support for Allwinner H6 EMAC megous
2019-04-05 23:45   ` megous
2019-04-05 23:45   ` megous via linux-sunxi
2019-04-08  7:25   ` Maxime Ripard
2019-04-08  7:25     ` Maxime Ripard
2019-04-08  7:25     ` Maxime Ripard
2019-04-05 23:45 ` [PATCH 06/12] net: stmmac: sun8i: force select external PHY when no internal one megous
2019-04-05 23:45   ` megous
2019-04-05 23:45   ` megous via linux-sunxi
2019-04-06 10:24   ` Sergei Shtylyov
2019-04-06 10:24     ` Sergei Shtylyov
2019-04-06 10:24     ` Sergei Shtylyov
2019-04-05 23:45 ` [PATCH 07/12] arm64: dts: allwinner: orange-pi-3: Enable ethernet megous
2019-04-05 23:45   ` megous
2019-04-05 23:45   ` megous via linux-sunxi
2019-04-08  6:11   ` Jagan Teki
2019-04-08  6:11     ` Jagan Teki
2019-04-08  6:11     ` Jagan Teki
2019-04-08 22:26     ` Ondřej Jirman
2019-04-08 22:26       ` Ondřej Jirman
2019-04-08 22:26       ` 'Ondřej Jirman' via linux-sunxi
2019-04-08  7:40   ` Maxime Ripard
2019-04-08  7:40     ` Maxime Ripard
2019-04-08  7:40     ` Maxime Ripard
2019-04-08 23:22     ` Ondřej Jirman
2019-04-08 23:22       ` Ondřej Jirman
2019-04-08 23:22       ` 'Ondřej Jirman' via linux-sunxi
2019-04-09  7:23       ` Maxime Ripard
2019-04-09  7:23         ` Maxime Ripard
2019-04-09  7:23         ` Maxime Ripard
2019-04-09  7:35       ` Linus Walleij
2019-04-09  7:35       ` Linus Walleij
2019-04-09  7:35       ` Linus Walleij
2019-04-09  7:35         ` Linus Walleij
2019-04-09  7:35         ` Linus Walleij
2019-04-05 23:45 ` [PATCH 08/12] arm64: dts: allwinner: h6: Add MMC1 pins megous
2019-04-05 23:45   ` megous
2019-04-05 23:45   ` megous via linux-sunxi
2019-04-08  7:43   ` Maxime Ripard
2019-04-08  7:43     ` Maxime Ripard
2019-04-08  7:43     ` Maxime Ripard
2019-04-08 22:41     ` Ondřej Jirman
2019-04-08 22:41       ` Ondřej Jirman
2019-04-08 22:41       ` 'Ondřej Jirman' via linux-sunxi
2019-04-09  7:20       ` Maxime Ripard
2019-04-09  7:20         ` Maxime Ripard
2019-04-09  7:20         ` Maxime Ripard
2019-04-05 23:45 ` [PATCH 09/12] pinctrl: sunxi: Prepare for alternative bias voltage setting methods megous
2019-04-05 23:45   ` megous
2019-04-05 23:45   ` megous via linux-sunxi
2019-04-08 12:53   ` Linus Walleij
2019-04-08 12:53     ` Linus Walleij
2019-04-08 12:53     ` Linus Walleij
2019-04-08 13:08     ` Ondřej Jirman
2019-04-08 13:08       ` Ondřej Jirman
2019-04-08 13:08       ` Ondřej Jirman
2019-04-05 23:45 ` [PATCH 10/12] pinctrl: sunxi: Support I/O bias voltage setting on H6 megous
2019-04-05 23:45   ` megous
2019-04-05 23:45   ` megous via linux-sunxi
2019-04-08  1:31   ` Ondřej Jirman
2019-04-08  1:31     ` Ondřej Jirman
2019-04-08  1:31     ` 'Ondřej Jirman' via linux-sunxi
2019-04-08  7:42   ` Maxime Ripard
2019-04-08  7:42     ` Maxime Ripard
2019-04-08  7:42     ` Maxime Ripard
2019-04-05 23:45 ` [PATCH 11/12] brcmfmac: Loading the correct firmware for brcm43456 megous
2019-04-05 23:45   ` megous
2019-04-05 23:45   ` megous via linux-sunxi
2019-04-13 11:06   ` Kalle Valo
2019-04-13 11:06   ` Kalle Valo
2019-04-13 11:06     ` Kalle Valo
     [not found]   ` <20190405234514.6183-12-megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2019-04-13 11:06     ` Kalle Valo
2019-04-13 11:06   ` Kalle Valo
2019-04-13 11:06   ` Kalle Valo
2019-04-13 11:06     ` Kalle Valo
2019-04-05 23:45 ` [PATCH 12/12] arm64: dts: allwinner: orange-pi-3: Enable WiFi megous
2019-04-05 23:45   ` megous
2019-04-05 23:45   ` megous via linux-sunxi
2019-04-07 15:31   ` [linux-sunxi] " Clément Péron
2019-04-07 15:31     ` Clément Péron
2019-04-07 15:31     ` Clément Péron
2019-04-07 16:15     ` [linux-sunxi] " Ondřej Jirman
2019-04-07 16:15       ` Ondřej Jirman
2019-04-07 16:15       ` Ondřej Jirman
2019-04-07 13:36 ` [linux-sunxi] [PATCH 00/12] Add support for Orange Pi 3 Clément Péron
2019-04-07 13:36   ` Clément Péron
2019-04-07 13:36   ` Clément Péron
2019-04-07 14:32   ` [linux-sunxi] " Ondřej Jirman
2019-04-07 14:32     ` Ondřej Jirman
2019-04-07 14:32     ` 'Ondřej Jirman' via linux-sunxi
2019-04-07 15:08     ` [linux-sunxi] " Clément Péron
2019-04-07 15:08       ` Clément Péron
2019-04-07 15:08       ` Clément Péron
2019-04-08  6:01     ` [linux-sunxi] " Jagan Teki
2019-04-08  6:01     ` Jagan Teki
2019-04-08  6:01     ` Jagan Teki
2019-04-08  6:01       ` Jagan Teki
2019-04-08 12:46       ` Ondřej Jirman
2019-04-08 12:46         ` Ondřej Jirman
2019-04-08 12:46         ` 'Ondřej Jirman' via linux-sunxi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190405234514.6183-2-megous@megous.com \
    --to=megous@megous.com \
    --cc=airlied@linux.ie \
    --cc=alexandre.torgue@st.com \
    --cc=arend.vanspriel@broadcom.com \
    --cc=brcm80211-dev-list.pdl@broadcom.com \
    --cc=brcm80211-dev-list@cypress.com \
    --cc=chi-hsien.lin@cypress.com \
    --cc=daniel@ffwll.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=franky.lin@broadcom.com \
    --cc=hante.meuleman@broadcom.com \
    --cc=joabreu@synopsys.com \
    --cc=kvalo@codeaurora.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=linux-sunxi@googlegroups.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=naveen.gupta@cypress.com \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    --cc=wright.feng@cypress.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.