From: Ulf Hansson <ulf.hansson@linaro.org>
To: "Rafael J . Wysocki" <rjw@rjwysocki.net>, linux-pm@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Lina Iyer <ilina@codeaurora.org>,
Sudeep Holla <sudeep.holla@arm.com>,
linux-arm-kernel@lists.infradead.org
Subject: [RESEND PATCH v2 1/5] drivers: firmware: psci: Move psci to separate directory
Date: Wed, 10 Apr 2019 10:20:21 +0200 [thread overview]
Message-ID: <20190410082025.5989-2-ulf.hansson@linaro.org> (raw)
In-Reply-To: <20190410082025.5989-1-ulf.hansson@linaro.org>
Some following changes extends the PSCI driver with some additional new
files. Let's avoid to continue cluttering the toplevel firmware directory
and first move the PSCI files into a PSCI sub-directory.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
---
drivers/firmware/Kconfig | 15 +--------------
drivers/firmware/Makefile | 3 +--
drivers/firmware/psci/Kconfig | 13 +++++++++++++
drivers/firmware/psci/Makefile | 4 ++++
drivers/firmware/{ => psci}/psci.c | 0
drivers/firmware/{ => psci}/psci_checker.c | 0
6 files changed, 19 insertions(+), 16 deletions(-)
create mode 100644 drivers/firmware/psci/Kconfig
create mode 100644 drivers/firmware/psci/Makefile
rename drivers/firmware/{ => psci}/psci.c (100%)
rename drivers/firmware/{ => psci}/psci_checker.c (100%)
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index f754578414f0..e1385f47d4ac 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -5,20 +5,6 @@
menu "Firmware Drivers"
-config ARM_PSCI_FW
- bool
-
-config ARM_PSCI_CHECKER
- bool "ARM PSCI checker"
- depends on ARM_PSCI_FW && HOTPLUG_CPU && CPU_IDLE && !TORTURE_TEST
- help
- Run the PSCI checker during startup. This checks that hotplug and
- suspend operations work correctly when using PSCI.
-
- The torture tests may interfere with the PSCI checker by turning CPUs
- on and off through hotplug, so for now torture tests and PSCI checker
- are mutually exclusive.
-
config ARM_SCMI_PROTOCOL
bool "ARM System Control and Management Interface (SCMI) Message Protocol"
depends on ARM || ARM64 || COMPILE_TEST
@@ -270,6 +256,7 @@ config TI_SCI_PROTOCOL
config HAVE_ARM_SMCCC
bool
+source "drivers/firmware/psci/Kconfig"
source "drivers/firmware/broadcom/Kconfig"
source "drivers/firmware/google/Kconfig"
source "drivers/firmware/efi/Kconfig"
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 80feb635120f..9a3909a22682 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -2,8 +2,6 @@
#
# Makefile for the linux kernel.
#
-obj-$(CONFIG_ARM_PSCI_FW) += psci.o
-obj-$(CONFIG_ARM_PSCI_CHECKER) += psci_checker.o
obj-$(CONFIG_ARM_SCPI_PROTOCOL) += arm_scpi.o
obj-$(CONFIG_ARM_SCPI_POWER_DOMAIN) += scpi_pm_domain.o
obj-$(CONFIG_ARM_SDE_INTERFACE) += arm_sdei.o
@@ -25,6 +23,7 @@ CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch armv7-a\n.arch_extension sec,-DREQU
obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o
obj-$(CONFIG_ARM_SCMI_PROTOCOL) += arm_scmi/
+obj-y += psci/
obj-y += broadcom/
obj-y += meson/
obj-$(CONFIG_GOOGLE_FIRMWARE) += google/
diff --git a/drivers/firmware/psci/Kconfig b/drivers/firmware/psci/Kconfig
new file mode 100644
index 000000000000..26a3b32bf7ab
--- /dev/null
+++ b/drivers/firmware/psci/Kconfig
@@ -0,0 +1,13 @@
+config ARM_PSCI_FW
+ bool
+
+config ARM_PSCI_CHECKER
+ bool "ARM PSCI checker"
+ depends on ARM_PSCI_FW && HOTPLUG_CPU && CPU_IDLE && !TORTURE_TEST
+ help
+ Run the PSCI checker during startup. This checks that hotplug and
+ suspend operations work correctly when using PSCI.
+
+ The torture tests may interfere with the PSCI checker by turning CPUs
+ on and off through hotplug, so for now torture tests and PSCI checker
+ are mutually exclusive.
diff --git a/drivers/firmware/psci/Makefile b/drivers/firmware/psci/Makefile
new file mode 100644
index 000000000000..1956b882470f
--- /dev/null
+++ b/drivers/firmware/psci/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+obj-$(CONFIG_ARM_PSCI_FW) += psci.o
+obj-$(CONFIG_ARM_PSCI_CHECKER) += psci_checker.o
diff --git a/drivers/firmware/psci.c b/drivers/firmware/psci/psci.c
similarity index 100%
rename from drivers/firmware/psci.c
rename to drivers/firmware/psci/psci.c
diff --git a/drivers/firmware/psci_checker.c b/drivers/firmware/psci/psci_checker.c
similarity index 100%
rename from drivers/firmware/psci_checker.c
rename to drivers/firmware/psci/psci_checker.c
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Ulf Hansson <ulf.hansson@linaro.org>
To: "Rafael J . Wysocki" <rjw@rjwysocki.net>, linux-pm@vger.kernel.org
Cc: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com>,
Sudeep Holla <sudeep.holla@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Lina Iyer <ilina@codeaurora.org>,
Ulf Hansson <ulf.hansson@linaro.org>,
linux-arm-kernel@lists.infradead.org
Subject: [RESEND PATCH v2 1/5] drivers: firmware: psci: Move psci to separate directory
Date: Wed, 10 Apr 2019 10:20:21 +0200 [thread overview]
Message-ID: <20190410082025.5989-2-ulf.hansson@linaro.org> (raw)
Message-ID: <20190410082021.ko3D0OWbZv60s-K4inGw5BAoF0uWoUJsLW-NJRuRkfU@z> (raw)
In-Reply-To: <20190410082025.5989-1-ulf.hansson@linaro.org>
Some following changes extends the PSCI driver with some additional new
files. Let's avoid to continue cluttering the toplevel firmware directory
and first move the PSCI files into a PSCI sub-directory.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
---
drivers/firmware/Kconfig | 15 +--------------
drivers/firmware/Makefile | 3 +--
drivers/firmware/psci/Kconfig | 13 +++++++++++++
drivers/firmware/psci/Makefile | 4 ++++
drivers/firmware/{ => psci}/psci.c | 0
drivers/firmware/{ => psci}/psci_checker.c | 0
6 files changed, 19 insertions(+), 16 deletions(-)
create mode 100644 drivers/firmware/psci/Kconfig
create mode 100644 drivers/firmware/psci/Makefile
rename drivers/firmware/{ => psci}/psci.c (100%)
rename drivers/firmware/{ => psci}/psci_checker.c (100%)
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index f754578414f0..e1385f47d4ac 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -5,20 +5,6 @@
menu "Firmware Drivers"
-config ARM_PSCI_FW
- bool
-
-config ARM_PSCI_CHECKER
- bool "ARM PSCI checker"
- depends on ARM_PSCI_FW && HOTPLUG_CPU && CPU_IDLE && !TORTURE_TEST
- help
- Run the PSCI checker during startup. This checks that hotplug and
- suspend operations work correctly when using PSCI.
-
- The torture tests may interfere with the PSCI checker by turning CPUs
- on and off through hotplug, so for now torture tests and PSCI checker
- are mutually exclusive.
-
config ARM_SCMI_PROTOCOL
bool "ARM System Control and Management Interface (SCMI) Message Protocol"
depends on ARM || ARM64 || COMPILE_TEST
@@ -270,6 +256,7 @@ config TI_SCI_PROTOCOL
config HAVE_ARM_SMCCC
bool
+source "drivers/firmware/psci/Kconfig"
source "drivers/firmware/broadcom/Kconfig"
source "drivers/firmware/google/Kconfig"
source "drivers/firmware/efi/Kconfig"
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 80feb635120f..9a3909a22682 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -2,8 +2,6 @@
#
# Makefile for the linux kernel.
#
-obj-$(CONFIG_ARM_PSCI_FW) += psci.o
-obj-$(CONFIG_ARM_PSCI_CHECKER) += psci_checker.o
obj-$(CONFIG_ARM_SCPI_PROTOCOL) += arm_scpi.o
obj-$(CONFIG_ARM_SCPI_POWER_DOMAIN) += scpi_pm_domain.o
obj-$(CONFIG_ARM_SDE_INTERFACE) += arm_sdei.o
@@ -25,6 +23,7 @@ CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch armv7-a\n.arch_extension sec,-DREQU
obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o
obj-$(CONFIG_ARM_SCMI_PROTOCOL) += arm_scmi/
+obj-y += psci/
obj-y += broadcom/
obj-y += meson/
obj-$(CONFIG_GOOGLE_FIRMWARE) += google/
diff --git a/drivers/firmware/psci/Kconfig b/drivers/firmware/psci/Kconfig
new file mode 100644
index 000000000000..26a3b32bf7ab
--- /dev/null
+++ b/drivers/firmware/psci/Kconfig
@@ -0,0 +1,13 @@
+config ARM_PSCI_FW
+ bool
+
+config ARM_PSCI_CHECKER
+ bool "ARM PSCI checker"
+ depends on ARM_PSCI_FW && HOTPLUG_CPU && CPU_IDLE && !TORTURE_TEST
+ help
+ Run the PSCI checker during startup. This checks that hotplug and
+ suspend operations work correctly when using PSCI.
+
+ The torture tests may interfere with the PSCI checker by turning CPUs
+ on and off through hotplug, so for now torture tests and PSCI checker
+ are mutually exclusive.
diff --git a/drivers/firmware/psci/Makefile b/drivers/firmware/psci/Makefile
new file mode 100644
index 000000000000..1956b882470f
--- /dev/null
+++ b/drivers/firmware/psci/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+obj-$(CONFIG_ARM_PSCI_FW) += psci.o
+obj-$(CONFIG_ARM_PSCI_CHECKER) += psci_checker.o
diff --git a/drivers/firmware/psci.c b/drivers/firmware/psci/psci.c
similarity index 100%
rename from drivers/firmware/psci.c
rename to drivers/firmware/psci/psci.c
diff --git a/drivers/firmware/psci_checker.c b/drivers/firmware/psci/psci_checker.c
similarity index 100%
rename from drivers/firmware/psci_checker.c
rename to drivers/firmware/psci/psci_checker.c
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Ulf Hansson <ulf.hansson@linaro.org>
To: "Rafael J . Wysocki" <rjw@rjwysocki.net>, linux-pm@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Lina Iyer <ilina@codeaurora.org>,
Sudeep Holla <sudeep.holla@arm.com>,
linux-arm-kernel@lists.infradead.org
Subject: [RESEND PATCH v2 1/5] drivers: firmware: psci: Move psci to separate directory
Date: Wed, 10 Apr 2019 10:20:21 +0200 [thread overview]
Message-ID: <20190410082025.5989-2-ulf.hansson@linaro.org> (raw)
In-Reply-To: <20190410082025.5989-1-ulf.hansson@linaro.org>
Some following changes extends the PSCI driver with some additional new
files. Let's avoid to continue cluttering the toplevel firmware directory
and first move the PSCI files into a PSCI sub-directory.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
---
drivers/firmware/Kconfig | 15 +--------------
drivers/firmware/Makefile | 3 +--
drivers/firmware/psci/Kconfig | 13 +++++++++++++
drivers/firmware/psci/Makefile | 4 ++++
drivers/firmware/{ => psci}/psci.c | 0
drivers/firmware/{ => psci}/psci_checker.c | 0
6 files changed, 19 insertions(+), 16 deletions(-)
create mode 100644 drivers/firmware/psci/Kconfig
create mode 100644 drivers/firmware/psci/Makefile
rename drivers/firmware/{ => psci}/psci.c (100%)
rename drivers/firmware/{ => psci}/psci_checker.c (100%)
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index f754578414f0..e1385f47d4ac 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -5,20 +5,6 @@
menu "Firmware Drivers"
-config ARM_PSCI_FW
- bool
-
-config ARM_PSCI_CHECKER
- bool "ARM PSCI checker"
- depends on ARM_PSCI_FW && HOTPLUG_CPU && CPU_IDLE && !TORTURE_TEST
- help
- Run the PSCI checker during startup. This checks that hotplug and
- suspend operations work correctly when using PSCI.
-
- The torture tests may interfere with the PSCI checker by turning CPUs
- on and off through hotplug, so for now torture tests and PSCI checker
- are mutually exclusive.
-
config ARM_SCMI_PROTOCOL
bool "ARM System Control and Management Interface (SCMI) Message Protocol"
depends on ARM || ARM64 || COMPILE_TEST
@@ -270,6 +256,7 @@ config TI_SCI_PROTOCOL
config HAVE_ARM_SMCCC
bool
+source "drivers/firmware/psci/Kconfig"
source "drivers/firmware/broadcom/Kconfig"
source "drivers/firmware/google/Kconfig"
source "drivers/firmware/efi/Kconfig"
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 80feb635120f..9a3909a22682 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -2,8 +2,6 @@
#
# Makefile for the linux kernel.
#
-obj-$(CONFIG_ARM_PSCI_FW) += psci.o
-obj-$(CONFIG_ARM_PSCI_CHECKER) += psci_checker.o
obj-$(CONFIG_ARM_SCPI_PROTOCOL) += arm_scpi.o
obj-$(CONFIG_ARM_SCPI_POWER_DOMAIN) += scpi_pm_domain.o
obj-$(CONFIG_ARM_SDE_INTERFACE) += arm_sdei.o
@@ -25,6 +23,7 @@ CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch armv7-a\n.arch_extension sec,-DREQU
obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o
obj-$(CONFIG_ARM_SCMI_PROTOCOL) += arm_scmi/
+obj-y += psci/
obj-y += broadcom/
obj-y += meson/
obj-$(CONFIG_GOOGLE_FIRMWARE) += google/
diff --git a/drivers/firmware/psci/Kconfig b/drivers/firmware/psci/Kconfig
new file mode 100644
index 000000000000..26a3b32bf7ab
--- /dev/null
+++ b/drivers/firmware/psci/Kconfig
@@ -0,0 +1,13 @@
+config ARM_PSCI_FW
+ bool
+
+config ARM_PSCI_CHECKER
+ bool "ARM PSCI checker"
+ depends on ARM_PSCI_FW && HOTPLUG_CPU && CPU_IDLE && !TORTURE_TEST
+ help
+ Run the PSCI checker during startup. This checks that hotplug and
+ suspend operations work correctly when using PSCI.
+
+ The torture tests may interfere with the PSCI checker by turning CPUs
+ on and off through hotplug, so for now torture tests and PSCI checker
+ are mutually exclusive.
diff --git a/drivers/firmware/psci/Makefile b/drivers/firmware/psci/Makefile
new file mode 100644
index 000000000000..1956b882470f
--- /dev/null
+++ b/drivers/firmware/psci/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+obj-$(CONFIG_ARM_PSCI_FW) += psci.o
+obj-$(CONFIG_ARM_PSCI_CHECKER) += psci_checker.o
diff --git a/drivers/firmware/psci.c b/drivers/firmware/psci/psci.c
similarity index 100%
rename from drivers/firmware/psci.c
rename to drivers/firmware/psci/psci.c
diff --git a/drivers/firmware/psci_checker.c b/drivers/firmware/psci/psci_checker.c
similarity index 100%
rename from drivers/firmware/psci_checker.c
rename to drivers/firmware/psci/psci_checker.c
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-04-10 8:20 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-10 8:20 [RESEND PATCH v2 0/5] drivers: firmware: psci: Some cleanup and refactoring Ulf Hansson
2019-04-10 8:20 ` Ulf Hansson
2019-04-10 8:20 ` Ulf Hansson
2019-04-10 8:20 ` Ulf Hansson [this message]
2019-04-10 8:20 ` [RESEND PATCH v2 1/5] drivers: firmware: psci: Move psci to separate directory Ulf Hansson
2019-04-10 8:20 ` Ulf Hansson
2019-04-10 8:20 ` [RESEND PATCH v2 2/5] MAINTAINERS: Update files for PSCI Ulf Hansson
2019-04-10 8:20 ` Ulf Hansson
2019-04-10 8:20 ` Ulf Hansson
2019-04-10 8:20 ` [RESEND PATCH v2 3/5] drivers: firmware: psci: Split psci_dt_cpu_init_idle() Ulf Hansson
2019-04-10 8:20 ` Ulf Hansson
2019-04-10 8:20 ` Ulf Hansson
2019-04-10 8:20 ` [RESEND PATCH v2 4/5] drivers: firmware: psci: Simplify error path of psci_dt_init() Ulf Hansson
2019-04-10 8:20 ` Ulf Hansson
2019-04-10 8:20 ` Ulf Hansson
2019-04-10 8:20 ` [RESEND PATCH v2 5/5] drivers: firmware: psci: Announce support for OS initiated suspend mode Ulf Hansson
2019-04-10 8:20 ` Ulf Hansson
2019-04-10 8:20 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190410082025.5989-2-ulf.hansson@linaro.org \
--to=ulf.hansson@linaro.org \
--cc=Lorenzo.Pieralisi@arm.com \
--cc=daniel.lezcano@linaro.org \
--cc=ilina@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=rjw@rjwysocki.net \
--cc=sudeep.holla@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.