All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
	Liam Girdwood <liam.r.girdwood@linux.intel.com>,
	Jie Yang <yang.jie@linux.intel.com>
Cc: alsa-devel@alsa-project.org, Mark Brown <broonie@kernel.org>
Subject: [PATCH] ASoC: Intel: Make boards more available for compile test
Date: Wed, 10 Apr 2019 17:38:00 +0100	[thread overview]
Message-ID: <20190410163800.31376-1-broonie@kernel.org> (raw)

The Intel boards have very strict dependencies which make them less
available for compile test than is desirable, with requirements for
specific drivers that are only needed at runtime but not at build time.
Relax this a bit if COMPILE_TEST is enabled to improve build coverage
for these drivers.

Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/intel/boards/Kconfig | 79 +++++++++++++++++++++++-----------
 1 file changed, 54 insertions(+), 25 deletions(-)

diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
index 12d6b73e9531..07b1a02934f1 100644
--- a/sound/soc/intel/boards/Kconfig
+++ b/sound/soc/intel/boards/Kconfig
@@ -16,7 +16,9 @@ if SND_SOC_INTEL_HASWELL
 
 config SND_SOC_INTEL_HASWELL_MACH
 	tristate "Haswell Lynxpoint"
-	depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
+	depends on I2C
+	depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
+	depends on X86_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_RT5640
 	help
 	  This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell
@@ -26,7 +28,10 @@ config SND_SOC_INTEL_HASWELL_MACH
 
 config SND_SOC_INTEL_BDW_RT5677_MACH
 	tristate "Broadwell with RT5677 codec"
-	depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM && GPIOLIB
+	depends on I2C
+	depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
+	depends on GPIOLIB || COMPILE_TEST
+	depends on X86_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_RT5677
 	help
 	  This adds support for Intel Broadwell platform based boards with
@@ -36,7 +41,9 @@ config SND_SOC_INTEL_BDW_RT5677_MACH
 
 config SND_SOC_INTEL_BROADWELL_MACH
 	tristate "Broadwell Wildcatpoint"
-	depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
+	depends on I2C
+	depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST
+	depends on X86_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_RT286
 	help
 	  This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell
@@ -49,7 +56,8 @@ if SND_SOC_INTEL_BAYTRAIL
 
 config SND_SOC_INTEL_BYT_MAX98090_MACH
 	tristate "Baytrail with MAX98090 codec"
-	depends on X86_INTEL_LPSS && I2C
+	depends on I2C
+	depends on X86_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_MAX98090
 	help
 	  This adds audio driver for Intel Baytrail platform based boards
@@ -59,7 +67,8 @@ config SND_SOC_INTEL_BYT_MAX98090_MACH
 
 config SND_SOC_INTEL_BYT_RT5640_MACH
 	tristate "Baytrail with RT5640 codec"
-	depends on X86_INTEL_LPSS && I2C
+	depends on I2C
+	depends on X86_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_RT5640
 	help
 	  This adds audio driver for Intel Baytrail platform based boards
@@ -72,7 +81,8 @@ if SND_SST_ATOM_HIFI2_PLATFORM
 
 config SND_SOC_INTEL_BYTCR_RT5640_MACH
 	tristate "Baytrail and Baytrail-CR with RT5640 codec"
-	depends on X86_INTEL_LPSS && I2C && ACPI
+	depends on I2C && ACPI
+	depends on X86_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_ACPI
 	select SND_SOC_RT5640
 	help
@@ -83,7 +93,8 @@ config SND_SOC_INTEL_BYTCR_RT5640_MACH
 
 config SND_SOC_INTEL_BYTCR_RT5651_MACH
 	tristate "Baytrail and Baytrail-CR with RT5651 codec"
-	depends on X86_INTEL_LPSS && I2C && ACPI
+	depends on I2C && ACPI
+	depends on X86_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_ACPI
 	select SND_SOC_RT5651
 	help
@@ -94,7 +105,8 @@ config SND_SOC_INTEL_BYTCR_RT5651_MACH
 
 config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
 	tristate "Cherrytrail & Braswell with RT5672 codec"
-	depends on X86_INTEL_LPSS && I2C && ACPI
+	depends on I2C && ACPI
+	depends on X86_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_ACPI
 	select SND_SOC_RT5670
         help
@@ -105,7 +117,8 @@ config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
 
 config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
 	tristate "Cherrytrail & Braswell with RT5645/5650 codec"
-	depends on X86_INTEL_LPSS && I2C && ACPI
+	depends on I2C && ACPI
+	depends on X86_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_ACPI
 	select SND_SOC_RT5645
 	help
@@ -116,7 +129,8 @@ config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
 
 config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
 	tristate "Cherrytrail & Braswell with MAX98090 & TI codec"
-	depends on X86_INTEL_LPSS && I2C && ACPI
+	depends on I2C && ACPI
+	depends on X86_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_MAX98090
 	select SND_SOC_TS3A227E
 	help
@@ -127,7 +141,8 @@ config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
 
 config SND_SOC_INTEL_CHT_BSW_NAU8824_MACH
 	tristate "Cherrytrail & Braswell with NAU88L24 codec"
-	depends on X86_INTEL_LPSS && I2C && ACPI
+	depends on I2C && ACPI
+	depends on X86_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_ACPI
 	select SND_SOC_NAU8824
 	help
@@ -138,7 +153,8 @@ config SND_SOC_INTEL_CHT_BSW_NAU8824_MACH
 
 config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
 	tristate "Baytrail & Cherrytrail with DA7212/7213 codec"
-	depends on X86_INTEL_LPSS && I2C && ACPI
+	depends on I2C && ACPI
+	depends on X86_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_ACPI
 	select SND_SOC_DA7213
 	help
@@ -149,7 +165,8 @@ config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
 
 config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
 	tristate "Baytrail & Cherrytrail with ES8316 codec"
-	depends on X86_INTEL_LPSS && I2C && ACPI
+	depends on I2C && ACPI
+	depends on X86_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_ACPI
 	select SND_SOC_ES8316
 	help
@@ -160,7 +177,8 @@ config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
 
 config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH
 	tristate "Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)"
-	depends on X86_INTEL_LPSS && I2C && ACPI
+	depends on I2C && ACPI
+	depends on X86_INTEL_LPSS || COMPILE_TEST
 	help
 	  This adds support for ASoC machine driver for the MinnowBoard Max or
 	  Up boards and provides access to I2S signals on the Low-Speed
@@ -176,7 +194,8 @@ if SND_SOC_INTEL_SKL
 
 config SND_SOC_INTEL_SKL_RT286_MACH
 	tristate "SKL with RT286 I2S mode"
-	depends on MFD_INTEL_LPSS && I2C && ACPI
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_RT286
 	select SND_SOC_DMIC
 	select SND_SOC_HDAC_HDMI
@@ -188,7 +207,8 @@ config SND_SOC_INTEL_SKL_RT286_MACH
 
 config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
 	tristate "SKL with NAU88L25 and SSM4567 in I2S Mode"
-	depends on MFD_INTEL_LPSS && I2C && ACPI
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_NAU8825
 	select SND_SOC_SSM4567
 	select SND_SOC_DMIC
@@ -201,7 +221,8 @@ config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
 
 config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
 	tristate "SKL with NAU88L25 and MAX98357A in I2S Mode"
-	depends on MFD_INTEL_LPSS && I2C && ACPI
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_NAU8825
 	select SND_SOC_MAX98357A
 	select SND_SOC_DMIC
@@ -218,7 +239,8 @@ if SND_SOC_INTEL_APL
 
 config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
 	tristate "Broxton with DA7219 and MAX98357A in I2S Mode"
-	depends on MFD_INTEL_LPSS && I2C && ACPI
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_DA7219
 	select SND_SOC_MAX98357A
 	select SND_SOC_DMIC
@@ -232,7 +254,8 @@ config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
 
 config SND_SOC_INTEL_BXT_RT298_MACH
 	tristate "Broxton with RT298 I2S mode"
-	depends on MFD_INTEL_LPSS && I2C && ACPI
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_RT298
 	select SND_SOC_DMIC
 	select SND_SOC_HDAC_HDMI
@@ -249,7 +272,8 @@ if SND_SOC_INTEL_KBL
 
 config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
 	tristate "KBL with RT5663 and MAX98927 in I2S Mode"
-	depends on MFD_INTEL_LPSS && I2C && ACPI
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_RT5663
 	select SND_SOC_MAX98927
 	select SND_SOC_DMIC
@@ -263,7 +287,8 @@ config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
 
 config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
         tristate "KBL with RT5663, RT5514 and MAX98927 in I2S Mode"
-        depends on MFD_INTEL_LPSS && I2C && ACPI
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
         depends on SPI
         select SND_SOC_RT5663
         select SND_SOC_RT5514
@@ -278,7 +303,8 @@ config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
 
 config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH
 	tristate "KBL with DA7219 and MAX98357A in I2S Mode"
-	depends on MFD_INTEL_LPSS && I2C && ACPI
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_DA7219
 	select SND_SOC_MAX98357A
 	select SND_SOC_DMIC
@@ -290,7 +316,8 @@ config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH
 
 config SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH
 	tristate "KBL with DA7219 and MAX98927 in I2S Mode"
-	depends on MFD_INTEL_LPSS && I2C && ACPI
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_DA7219
 	select SND_SOC_MAX98927
 	select SND_SOC_MAX98373
@@ -304,7 +331,8 @@ config SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH
 
 config SND_SOC_INTEL_KBL_RT5660_MACH
 	tristate "KBL with RT5660 in I2S Mode"
-	depends on MFD_INTEL_LPSS && I2C && ACPI
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_RT5660
 	select SND_SOC_HDAC_HDMI
 	help
@@ -318,7 +346,8 @@ if SND_SOC_INTEL_GLK
 
 config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH
 	tristate "GLK with RT5682 and MAX98357A in I2S Mode"
-	depends on MFD_INTEL_LPSS && I2C && ACPI
+	depends on I2C && ACPI
+	depends on MFD_INTEL_LPSS || COMPILE_TEST
 	select SND_SOC_RT5682
 	select SND_SOC_MAX98357A
 	select SND_SOC_DMIC
-- 
2.20.1

             reply	other threads:[~2019-04-10 16:38 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-10 16:38 Mark Brown [this message]
2019-04-10 18:05 ` [PATCH] ASoC: Intel: Make boards more available for compile test Pierre-Louis Bossart
2019-04-11 11:01   ` Mark Brown
2019-04-11 11:19 ` Applied "ASoC: Intel: Make boards more available for compile test" to the asoc tree Mark Brown
2019-05-02  2:18 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190410163800.31376-1-broonie@kernel.org \
    --to=broonie@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=liam.r.girdwood@linux.intel.com \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=yang.jie@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.