All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Sekhar Nori <nsekhar@ti.com>, Kevin Hilman <khilman@kernel.org>,
	Alan Stern <stern@rowland.harvard.edu>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [PATCH v4 1/6] ARM: davinci: add missing sentinels to GPIO lookup tables
Date: Thu, 11 Apr 2019 11:30:19 +0200	[thread overview]
Message-ID: <20190411093024.23555-2-brgl@bgdev.pl> (raw)
In-Reply-To: <20190411093024.23555-1-brgl@bgdev.pl>

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Some GPIO lookup tables defined in davinci board files are missing
array sentinels. If an entry for given device cannot be found, this
will cause a kernel panic.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-da830-evm.c     | 2 ++
 arch/arm/mach-davinci/board-da850-evm.c     | 1 +
 arch/arm/mach-davinci/board-dm355-evm.c     | 1 +
 arch/arm/mach-davinci/board-dm644x-evm.c    | 1 +
 arch/arm/mach-davinci/board-omapl138-hawk.c | 1 +
 5 files changed, 6 insertions(+)

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index ff097ecfa451..e3d74e43c47d 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -58,6 +58,7 @@ static struct gpiod_lookup_table da830_evm_usb_gpio_lookup = {
 	.table = {
 		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, "vbus", 0),
 		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_OVC, "oc", 0),
+		{ }
 	},
 };
 
@@ -156,6 +157,7 @@ static struct gpiod_lookup_table mmc_gpios_table = {
 			    GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_WP_PIN, "wp",
 			    GPIO_ACTIVE_LOW),
+		{ }
 	},
 };
 
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 1fdc9283a8c5..4ee65a8a3b80 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -784,6 +784,7 @@ static struct gpiod_lookup_table mmc_gpios_table = {
 			    GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_WP_PIN, "wp",
 			    GPIO_ACTIVE_HIGH),
+		{ }
 	},
 };
 
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 64d81fc86f14..5113273fda69 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -121,6 +121,7 @@ static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
 		GPIO_LOOKUP("davinci_gpio", DM355_I2C_SCL_PIN, "scl",
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+		{ }
 	},
 };
 
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index de15f782816e..9d87d4e440ea 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -663,6 +663,7 @@ static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
 		GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SCL_PIN, "scl",
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+		{ }
 	},
 };
 
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 0896af2bed24..e244c8648594 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -303,6 +303,7 @@ static struct gpiod_lookup_table hawk_usb_gpio_lookup = {
 	.table = {
 		GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, "vbus", 0),
 		GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0),
+		{ }
 	},
 };
 
-- 
2.21.0


WARNING: multiple messages have this Message-ID (diff)
From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Sekhar Nori <nsekhar@ti.com>, Kevin Hilman <khilman@kernel.org>,
	Alan Stern <stern@rowland.harvard.edu>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [v4,1/6] ARM: davinci: add missing sentinels to GPIO lookup tables
Date: Thu, 11 Apr 2019 11:30:19 +0200	[thread overview]
Message-ID: <20190411093024.23555-2-brgl@bgdev.pl> (raw)

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Some GPIO lookup tables defined in davinci board files are missing
array sentinels. If an entry for given device cannot be found, this
will cause a kernel panic.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-da830-evm.c     | 2 ++
 arch/arm/mach-davinci/board-da850-evm.c     | 1 +
 arch/arm/mach-davinci/board-dm355-evm.c     | 1 +
 arch/arm/mach-davinci/board-dm644x-evm.c    | 1 +
 arch/arm/mach-davinci/board-omapl138-hawk.c | 1 +
 5 files changed, 6 insertions(+)

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index ff097ecfa451..e3d74e43c47d 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -58,6 +58,7 @@ static struct gpiod_lookup_table da830_evm_usb_gpio_lookup = {
 	.table = {
 		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, "vbus", 0),
 		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_OVC, "oc", 0),
+		{ }
 	},
 };
 
@@ -156,6 +157,7 @@ static struct gpiod_lookup_table mmc_gpios_table = {
 			    GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_WP_PIN, "wp",
 			    GPIO_ACTIVE_LOW),
+		{ }
 	},
 };
 
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 1fdc9283a8c5..4ee65a8a3b80 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -784,6 +784,7 @@ static struct gpiod_lookup_table mmc_gpios_table = {
 			    GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_WP_PIN, "wp",
 			    GPIO_ACTIVE_HIGH),
+		{ }
 	},
 };
 
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 64d81fc86f14..5113273fda69 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -121,6 +121,7 @@ static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
 		GPIO_LOOKUP("davinci_gpio", DM355_I2C_SCL_PIN, "scl",
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+		{ }
 	},
 };
 
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index de15f782816e..9d87d4e440ea 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -663,6 +663,7 @@ static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
 		GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SCL_PIN, "scl",
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+		{ }
 	},
 };
 
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 0896af2bed24..e244c8648594 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -303,6 +303,7 @@ static struct gpiod_lookup_table hawk_usb_gpio_lookup = {
 	.table = {
 		GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, "vbus", 0),
 		GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0),
+		{ }
 	},
 };
 

WARNING: multiple messages have this Message-ID (diff)
From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Sekhar Nori <nsekhar@ti.com>, Kevin Hilman <khilman@kernel.org>,
	Alan Stern <stern@rowland.harvard.edu>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 1/6] ARM: davinci: add missing sentinels to GPIO lookup tables
Date: Thu, 11 Apr 2019 11:30:19 +0200	[thread overview]
Message-ID: <20190411093024.23555-2-brgl@bgdev.pl> (raw)
In-Reply-To: <20190411093024.23555-1-brgl@bgdev.pl>

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Some GPIO lookup tables defined in davinci board files are missing
array sentinels. If an entry for given device cannot be found, this
will cause a kernel panic.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-da830-evm.c     | 2 ++
 arch/arm/mach-davinci/board-da850-evm.c     | 1 +
 arch/arm/mach-davinci/board-dm355-evm.c     | 1 +
 arch/arm/mach-davinci/board-dm644x-evm.c    | 1 +
 arch/arm/mach-davinci/board-omapl138-hawk.c | 1 +
 5 files changed, 6 insertions(+)

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index ff097ecfa451..e3d74e43c47d 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -58,6 +58,7 @@ static struct gpiod_lookup_table da830_evm_usb_gpio_lookup = {
 	.table = {
 		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, "vbus", 0),
 		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_OVC, "oc", 0),
+		{ }
 	},
 };
 
@@ -156,6 +157,7 @@ static struct gpiod_lookup_table mmc_gpios_table = {
 			    GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_WP_PIN, "wp",
 			    GPIO_ACTIVE_LOW),
+		{ }
 	},
 };
 
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 1fdc9283a8c5..4ee65a8a3b80 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -784,6 +784,7 @@ static struct gpiod_lookup_table mmc_gpios_table = {
 			    GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_WP_PIN, "wp",
 			    GPIO_ACTIVE_HIGH),
+		{ }
 	},
 };
 
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 64d81fc86f14..5113273fda69 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -121,6 +121,7 @@ static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
 		GPIO_LOOKUP("davinci_gpio", DM355_I2C_SCL_PIN, "scl",
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+		{ }
 	},
 };
 
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index de15f782816e..9d87d4e440ea 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -663,6 +663,7 @@ static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
 		GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SCL_PIN, "scl",
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+		{ }
 	},
 };
 
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 0896af2bed24..e244c8648594 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -303,6 +303,7 @@ static struct gpiod_lookup_table hawk_usb_gpio_lookup = {
 	.table = {
 		GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, "vbus", 0),
 		GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0),
+		{ }
 	},
 };
 
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-04-11  9:30 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-11  9:30 [PATCH v4 0/6] ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator Bartosz Golaszewski
2019-04-11  9:30 ` Bartosz Golaszewski
2019-04-11  9:30 ` Bartosz Golaszewski [this message]
2019-04-11  9:30   ` [PATCH v4 1/6] ARM: davinci: add missing sentinels to GPIO lookup tables Bartosz Golaszewski
2019-04-11  9:30   ` [v4,1/6] " Bartosz Golaszewski
2019-04-11  9:30 ` [PATCH v4 2/6] usb: ohci-da8xx: let the regulator framework keep track of use count Bartosz Golaszewski
2019-04-11  9:30   ` Bartosz Golaszewski
2019-04-11  9:30   ` [v4,2/6] " Bartosz Golaszewski
2019-04-11  9:30 ` [PATCH v4 3/6] usb: ohci-da8xx: disable the regulator if the overcurrent irq fired Bartosz Golaszewski
2019-04-11  9:30   ` Bartosz Golaszewski
2019-04-11  9:30   ` [v4,3/6] " Bartosz Golaszewski
2019-04-12 10:39   ` [PATCH v4 3/6] " Sekhar Nori
2019-04-12 10:39     ` Sekhar Nori
2019-04-12 10:39     ` [v4,3/6] " Sekhar Nori
2019-04-12 12:12     ` [PATCH v4 3/6] " Bartosz Golaszewski
2019-04-12 12:12       ` Bartosz Golaszewski
2019-04-12 12:12       ` [v4,3/6] " Bartosz Golaszewski
2019-04-11  9:30 ` [PATCH v4 4/6] ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx Bartosz Golaszewski
2019-04-11  9:30   ` Bartosz Golaszewski
2019-04-11  9:30   ` [v4,4/6] " Bartosz Golaszewski
2019-04-11  9:30 ` [PATCH v4 5/6] ARM: davinci: da830-evm: " Bartosz Golaszewski
2019-04-11  9:30   ` Bartosz Golaszewski
2019-04-11  9:30   ` [v4,5/6] " Bartosz Golaszewski
2019-04-11  9:30 ` [PATCH v4 6/6] usb: ohci-da8xx: drop the vbus GPIO Bartosz Golaszewski
2019-04-11  9:30   ` Bartosz Golaszewski
2019-04-11  9:30   ` [v4,6/6] " Bartosz Golaszewski
2019-04-12 10:32   ` [PATCH v4 6/6] " Sekhar Nori
2019-04-12 10:32     ` Sekhar Nori
2019-04-12 10:32     ` [v4,6/6] " Sekhar Nori
2019-04-12 10:40 ` [PATCH v4 0/6] ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator Sekhar Nori
2019-04-12 10:40   ` Sekhar Nori

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190411093024.23555-2-brgl@bgdev.pl \
    --to=brgl@bgdev.pl \
    --cc=bgolaszewski@baylibre.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=khilman@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.