From: Valentin Schneider <valentin.schneider@arm.com> To: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: olof@lixom.net, marc.w.gonzalez@free.fr, john.stultz@linaro.org, liwei213@huawei.com Subject: [PATCH] arm64: defconfig: Update UFSHCD for Hi3660 soc Date: Tue, 16 Apr 2019 18:02:21 +0100 [thread overview] Message-ID: <20190416170221.13764-1-valentin.schneider@arm.com> (raw) Commit 7ee7ef24d02d ("scsi: arm64: defconfig: enable configs for Hisilicon ufs") set 'CONFIG_SCSI_UFS_HISI=y', but the configs it depends on (CONFIG_SCSI_HFSHCD_PLATFORM && CONFIG_SCSI_UFSHCD) were left to being built as modules. Commit 1f4fa50dd48f ("arm64: defconfig: Regenerate for v4.20") "fixed" that by reverting to 'CONFIG_SCSI_UFS_HISI=m'. Thing is, if the rootfs is stored in the on-board flash (which is the "canonical" way of doing things), we either need these drivers to be built-in, or we need to fiddle with an initramfs to access that flash and eventually load the modules installed over there. The former is the easiest, do that. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> --- arch/arm64/configs/defconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 2d9c39033c1a..32fb03503b0b 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -222,10 +222,10 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_HISI_SAS=y CONFIG_SCSI_HISI_SAS_PCI=y -CONFIG_SCSI_UFSHCD=m -CONFIG_SCSI_UFSHCD_PLATFORM=m +CONFIG_SCSI_UFSHCD=y +CONFIG_SCSI_UFSHCD_PLATFORM=y CONFIG_SCSI_UFS_QCOM=m -CONFIG_SCSI_UFS_HISI=m +CONFIG_SCSI_UFS_HISI=y CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_AHCI_PLATFORM=y -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Valentin Schneider <valentin.schneider@arm.com> To: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: olof@lixom.net, john.stultz@linaro.org, liwei213@huawei.com, marc.w.gonzalez@free.fr Subject: [PATCH] arm64: defconfig: Update UFSHCD for Hi3660 soc Date: Tue, 16 Apr 2019 18:02:21 +0100 [thread overview] Message-ID: <20190416170221.13764-1-valentin.schneider@arm.com> (raw) Commit 7ee7ef24d02d ("scsi: arm64: defconfig: enable configs for Hisilicon ufs") set 'CONFIG_SCSI_UFS_HISI=y', but the configs it depends on (CONFIG_SCSI_HFSHCD_PLATFORM && CONFIG_SCSI_UFSHCD) were left to being built as modules. Commit 1f4fa50dd48f ("arm64: defconfig: Regenerate for v4.20") "fixed" that by reverting to 'CONFIG_SCSI_UFS_HISI=m'. Thing is, if the rootfs is stored in the on-board flash (which is the "canonical" way of doing things), we either need these drivers to be built-in, or we need to fiddle with an initramfs to access that flash and eventually load the modules installed over there. The former is the easiest, do that. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> --- arch/arm64/configs/defconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 2d9c39033c1a..32fb03503b0b 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -222,10 +222,10 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_HISI_SAS=y CONFIG_SCSI_HISI_SAS_PCI=y -CONFIG_SCSI_UFSHCD=m -CONFIG_SCSI_UFSHCD_PLATFORM=m +CONFIG_SCSI_UFSHCD=y +CONFIG_SCSI_UFSHCD_PLATFORM=y CONFIG_SCSI_UFS_QCOM=m -CONFIG_SCSI_UFS_HISI=m +CONFIG_SCSI_UFS_HISI=y CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_AHCI_PLATFORM=y -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-04-16 17:02 UTC|newest] Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-04-16 17:02 Valentin Schneider [this message] 2019-04-16 17:02 ` [PATCH] arm64: defconfig: Update UFSHCD for Hi3660 soc Valentin Schneider 2019-04-17 0:25 ` Leo Yan 2019-04-17 0:25 ` Leo Yan 2019-04-17 8:03 ` Marc Gonzalez 2019-04-17 10:09 ` Valentin Schneider 2019-04-29 6:19 ` Olof Johansson 2019-04-29 6:19 ` Olof Johansson 2019-04-29 6:19 ` Olof Johansson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190416170221.13764-1-valentin.schneider@arm.com \ --to=valentin.schneider@arm.com \ --cc=john.stultz@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=liwei213@huawei.com \ --cc=marc.w.gonzalez@free.fr \ --cc=olof@lixom.net \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.