From: Ran Wang <ran.wang_1@nxp.com> To: Shawn Guo <shawnguo@kernel.org> Cc: Leo Li <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org>, "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>, Ran Wang <ran.wang_1@nxp.com> Subject: [PATCH] arm64: dts: lx2160a: add cpu idle support Date: Thu, 18 Apr 2019 03:42:25 +0000 [thread overview] Message-ID: <20190418034401.26480-1-ran.wang_1@nxp.com> (raw) lx2160a supports pw20 which could help save more power during cpu is dile. It needs system firmware support via PSCI. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> --- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 25 ++++++++++++++++++++++++ 1 files changed, 25 insertions(+), 0 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index fe87204..1e07155 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -33,6 +33,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster0_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@1 { @@ -48,6 +49,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster0_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@100 { @@ -63,6 +65,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster1_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@101 { @@ -78,6 +81,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster1_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@200 { @@ -93,6 +97,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster2_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@201 { @@ -108,6 +113,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster2_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@300 { @@ -123,6 +129,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster3_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@301 { @@ -138,6 +145,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster3_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@400 { @@ -153,6 +161,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster4_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@401 { @@ -168,6 +177,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster4_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@500 { @@ -183,6 +193,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster5_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@501 { @@ -198,6 +209,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster5_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@600 { @@ -213,6 +225,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster6_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@601 { @@ -228,6 +241,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster6_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@700 { @@ -243,6 +257,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster7_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@701 { @@ -258,6 +273,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster7_l2>; + cpu-idle-states = <&cpu_pw20>; }; cluster0_l2: l2-cache0 { @@ -323,6 +339,15 @@ cache-sets = <1024>; cache-level = <2>; }; + + cpu_pw20: cpu-pw20 { + compatible = "arm,idle-state"; + idle-state-name = "PW20"; + arm,psci-suspend-param = <0x0>; + entry-latency-us = <2000>; + exit-latency-us = <2000>; + min-residency-us = <6000>; + }; }; gic: interrupt-controller@6000000 { -- 1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: Ran Wang <ran.wang_1@nxp.com> To: Shawn Guo <shawnguo@kernel.org> Cc: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>, Leo Li <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>, Ran Wang <ran.wang_1@nxp.com>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org> Subject: [PATCH] arm64: dts: lx2160a: add cpu idle support Date: Thu, 18 Apr 2019 03:42:25 +0000 [thread overview] Message-ID: <20190418034401.26480-1-ran.wang_1@nxp.com> (raw) lx2160a supports pw20 which could help save more power during cpu is dile. It needs system firmware support via PSCI. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> --- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 25 ++++++++++++++++++++++++ 1 files changed, 25 insertions(+), 0 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index fe87204..1e07155 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -33,6 +33,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster0_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@1 { @@ -48,6 +49,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster0_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@100 { @@ -63,6 +65,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster1_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@101 { @@ -78,6 +81,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster1_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@200 { @@ -93,6 +97,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster2_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@201 { @@ -108,6 +113,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster2_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@300 { @@ -123,6 +129,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster3_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@301 { @@ -138,6 +145,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster3_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@400 { @@ -153,6 +161,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster4_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@401 { @@ -168,6 +177,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster4_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@500 { @@ -183,6 +193,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster5_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@501 { @@ -198,6 +209,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster5_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@600 { @@ -213,6 +225,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster6_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@601 { @@ -228,6 +241,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster6_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@700 { @@ -243,6 +257,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster7_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@701 { @@ -258,6 +273,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster7_l2>; + cpu-idle-states = <&cpu_pw20>; }; cluster0_l2: l2-cache0 { @@ -323,6 +339,15 @@ cache-sets = <1024>; cache-level = <2>; }; + + cpu_pw20: cpu-pw20 { + compatible = "arm,idle-state"; + idle-state-name = "PW20"; + arm,psci-suspend-param = <0x0>; + entry-latency-us = <2000>; + exit-latency-us = <2000>; + min-residency-us = <6000>; + }; }; gic: interrupt-controller@6000000 { -- 1.7.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-04-18 3:42 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-04-18 3:42 Ran Wang [this message] 2019-04-18 3:42 ` [PATCH] arm64: dts: lx2160a: add cpu idle support Ran Wang 2019-04-18 3:42 ` Ran Wang 2019-04-22 2:41 ` Shawn Guo 2019-04-22 2:41 ` Shawn Guo 2019-04-22 2:41 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190418034401.26480-1-ran.wang_1@nxp.com \ --to=ran.wang_1@nxp.com \ --cc=devicetree@vger.kernel.org \ --cc=leoyang.li@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.